* Intel Strata Flash (Question)
@ 2000-10-20 13:57 S A McConnell
0 siblings, 0 replies; only message in thread
From: S A McConnell @ 2000-10-20 13:57 UTC (permalink / raw)
To: mtd
I have been having some problems erasing and programming a 32-Mb Strata
Flash
Every once in a while after issuing a command I get 0x80ffff in the
status register. This of course causes my software to believe the
command has finished and that every possible error that could occur has
occured.
For example, here is some output from a 'software' chip erase.
Erasing block: 0x0
Erasing block: 0x40000
Erasing block: 0x80000
Erasing block: 0xc0000
Erasing block: 0x100000
***Error: Program or set error. Status= 0x80ffff
***Error: Clear or erase error. Status= 0x80ffff
***Error: Voltage range error. Status= 0x80ffff
***Error: Device protection error. Status= 0x80ffff
Erasing block: 0x140000
Erasing block: 0x180000
Erasing block: 0x1c0000
Erasing block: 0x200000
...
Has anyone else seen this?
Thanks,
Scott
To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-10-20 13:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-10-20 13:57 Intel Strata Flash (Question) S A McConnell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox