From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from asbestos.brocade.com ([63.121.140.244] helo=mail.brocade.com) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 150qhG-0003L7-00 for ; Fri, 18 May 2001 21:18:02 +0100 Message-ID: <3B058523.2060107@brocade.com> Date: Fri, 18 May 2001 13:25:07 -0700 From: Amit D Chaudhary MIME-Version: 1.0 To: Xavier DEBREUIL CC: linux-mtd@lists.infradead.org Subject: Re: how to make References: <3B01495C.A7CC459A@inventel.fr> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: You sure you have MTD* enabled in your .config? Please send more information next time including .config, make output, etc. Amit Xavier DEBREUIL wrote: > I got the 20010306 version working on my board and now I would like to use jffs2 > ; so, I got the last source version from the cvs access from yesterday and copy > necessary files in my kernel tree ; then make clean, xconfig, and Image but it > does not compile mtdchar or mtdblock and nothing in fact. I am using the > 2.4.0-test6 kernel. Did I miss something obvious ? > Do I have to modify Makefiles by hand ? > > Xavier > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ > >