From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from thor.lineo.com ([204.246.147.11]) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 15CS3g-00048X-00 for ; Tue, 19 Jun 2001 21:25:08 +0100 Message-ID: <3B2FB3AA.AEE36C93@Rikers.org> Date: Tue, 19 Jun 2001 14:18:50 -0600 From: Tim Riker MIME-Version: 1.0 To: Russ Dill CC: bootldr@handhelds.org, linux-mtd@lists.infradead.org Subject: Re: [Bootldr] cramfs/jffs2 bootloader code References: <3B2FB3D2.44047FCF@asu.edu> Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=us-ascii Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: Does this include the changes on: http://www.wearablegroup.org/software/bootldr/ which add jffs, jffs2, ymodem, etc to the crl bootldr? I'm about to release tftpboot from CF ether patches for blob to Erik. Russ Dill wrote: > > OK, the cramfs/jffs2 bootloader code is finally more or less complete. > > These modules allow a bootloader to load a kernel from multiple sources > (ie cramfs, jffs, straight from flash etc). It always load the file > "/linux" right now. Currently included are modules for cramfs, jffs2 and > zImage straight from flash. Currently, the interface is: -- Tim Riker - http://rikers.org/ - short SIGs! All I need to know I could have learned in Kindergarten ... if I'd just been paying attention.