From: Vipin Malik <vipin.malik@daniel.com>
To: ashwinp@aftek.com
Cc: linux-mtd@lists.infradead.org
Subject: Re: Is my flash being detected?
Date: Fri, 22 Jun 2001 09:42:58 -0500 [thread overview]
Message-ID: <3B335971.27EBD23D@daniel.com> (raw)
In-Reply-To: 993219781.58250@email.aftek.com
Make sure that you have included the cfi_cmdset_002.c module.
Vipin
ashwinp@aftek.com wrote:
> Hi freinds,
> I am trying to use mtd on L7205sdb.The flash chip used is AM29LV160DB.
> The flash size is 16 MB in byte mode and processor data bus being 32 bits wide.
> The .config for MTD is as below
> CONFIG_MTD=y
> CONFIG_MTD_DEBUG=y
> CONFIG_MTD_DEBUG_VERBOSE=3
> CONFIG_MTD_CFI=y
> CONFIG_MTD_CFI_AMDEXT=y
> CONFIG_MTD_ROM=y
> CONFIG_MTD_PHYSMAP=y
> CONFIG_MTD_PHYSMAP_START=000000
> CONFIG_MTD_PHYSMAP_LEN=10000
> CONFIG_MTD_PHYSMAP_BUSWIDTH=4
>
> It does say that AMd flash found but at the end it complains that
> "cfi_probe: No supported Vendor Command Set found"
>
> Given below are my bootup messages
>
> Linux version 2.2.1-rmk2 (root@localhost.localdomain) (libraries: /usr/local/arm/lib/gcc-lib/arm-linux/egcs-2.91.66/:/usr/lib/gcc/arm-linux/egcs-2.91.66/:/usr/local/arm/arm-linux/lib/arm-linux/egcs-2.91.66/:/usr/local/arm/arm-linux/lib/) #916 Fri Jun 22 17:51:46 IST 2001
> start_kernl: Before setup_arch, 00000000-00000000
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2001-06-22 14:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-06-22 14:23 Is my flash being detected? ashwinp
2001-06-22 14:42 ` Vipin Malik [this message]
2001-06-22 15:49 ` ashwinp
2001-06-22 16:04 ` David Woodhouse
2001-06-22 14:45 ` Vipin Malik
2001-06-22 14:44 ` David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B335971.27EBD23D@daniel.com \
--to=vipin.malik@daniel.com \
--cc=ashwinp@aftek.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox