From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mout01.kundenserver.de ([195.20.224.132]) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 15RE8U-00042d-00 for ; Mon, 30 Jul 2001 15:35:10 +0100 Message-ID: <3B6571F2.6258156D@jurca.de> Date: Mon, 30 Jul 2001 16:40:50 +0200 From: Jan Debiec MIME-Version: 1.0 To: Vipin Malik , "'linux-mtd@lists.infradead.org '" Subject: Re: JFFS and RTLinux References: <30724FF712DFD2119E6200104B244892011974BC@mail1> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: Thanks Vipin, I've installed RTAI-1.6 as UP with Arcom-2.2.17 kernel (by RTAI configuration, you don't need to set SMP flag) and the Arcom board is running. Not only board, the RTAI tests are running on Arcom too Jan P.S. But the question is still open, why has MTD and JFFS problems with SMP flag set in kernel config. Vipin Malik wrote: > > I know that at least with RTAI, you can set the SMP flag off and then use > the 8259 timer UP scheduler. RTL does not have something similar? > > Vipin > > P.S. I assume that without the SMP flag (and RTLinux) everything works fine? > > -----Original Message----- > From: Jan Debiec > To: linux-mtd@lists.infradead.org > Sent: 7/26/01 5:08 AM > Subject: JFFS and RTLinux > > Hello, > > I'm trying to use RealTimeLinux (RTL 3.0 pre9) on Arcom MediaGX SBC > (2.2.17 with MTD and JFFS1) > AS condition to run RTL, kernel (2.2.17) must be compiled with SMP flag > set on. > But then the JFFS is not running properly, kernel is not able to mount > the /dev/mtdblock2 as root fs. After message "Building JFFS fs crash > recovery tree ... " system is hanging. > Do you know the solution? > > Jan > -- > ---------------------------------- > Jan Debiec > Jurca Optoelektronik > Raiffeisenstr. 5D > D-63110 Rodgau (Dudenhofen) > Germany > > tel +49 6106 8290 20 > fax +49 6106 8290 26 > email jan.debiec@jurca.de > www.jurca.de > ---------------------------------- > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ -- ---------------------------------- Jan Debiec Jurca Optoelektronik Raiffeisenstr. 5D D-63110 Rodgau (Dudenhofen) Germany tel +49 6106 8290 20 fax +49 6106 8290 26 email jan.debiec@jurca.de www.jurca.de ----------------------------------