RE: Boot from DOC 2000

Veikko Werner
2001-09-06T06:03:39Z

Hi Holger,

I think the HOWTO is good for your target.
I don't see the problem.
create a partition on the DOC, make an ext2 fs on it.
You need to build your root file system on the DOC
create a /etc/lilo.conf (search the net for mtd-lilo - you'll find a
mtd-lilo.conf or something else)
and use mtd-lilo -r /mnt/nftla1 (or wherever you mount /dev/nftla1) to let
the DOC boot
what M-Systems firmware do you have on it?
if the kernel assumes a mtd device that you don't have - where is it than?

Veikko

> -----Original Message-----
> From: Holger Friedrich [SMTP:friedrich@MAZeT.de]
> Sent: Wednesday, September 05, 2001 5:14 PM
> To: 'linux-mtd@lists.infradead.org'
> Subject: Boot from DOC 2000
>
> Hi all,
> I got my kernel to recognize the DOC, I can mount it as nftla, I can put
> file systems on it, read and write. I was even able to put a demo from
> elinos on it and boot it, but this was on msdos fs using syslinux as
> bootloader.
> Now I want to boot a "real" linux using ext2 or jffs. I've tried to work
> through the mtd-jffs-HOWTO. It works fine as long as you just want to
> detect the DOC. When it comes to booting from it it seems to assume a
> mtd device, which I don't have.
> I'd like to know how to deal with nftl devices.
> Could anyone point me in the right direction?
> Thanks in advance Holger
> --
> =========================================================
> Holger Friedrich
>
> MAZeT GmbH mailto:friedrich@mazet.de
> branch office Jena Phone: +49 3641 280954
> Göschwitzer Straße 32
> 07745 Jena
> Germany
> Visit our website: http://www.MAZeT.de
> =========================================================
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/