From: Stefan Thomasson <stefan.thomasson@possio.com>
To: Linux MTD <linux-mtd@lists.infradead.org>
Subject: Question about protection registers in intel strataflash
Date: Wed, 04 Dec 2002 14:52:02 +0100 [thread overview]
Message-ID: <3DEE0882.75037D4E@possio.com> (raw)
Hi,
The calculation of ofs_factor does not seem to be
correct, at least not for the setup I'm using,
One 28F128j3a in word mode.
ofs_factor = cfi->interleave * cfi->device_type;
interleave is 1 (1 chip) and device_type is 2 (16 bit)
Which will lead to reads from 2*(ProtRegAddr+1) in
my case 0x202 but I know its located at 0x102.
Is the ProtRegAddr supposed to be a byte address
which need to be multiplied or is it a word address?
In 28f128j3a manual tables 20 and 21 it looks like
the same address should be used.
So I think only the cfi->interleave should be used.
reply other threads:[~2002-12-04 13:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DEE0882.75037D4E@possio.com \
--to=stefan.thomasson@possio.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox