From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from extraetmess.thales-e-transactions.com ([212.234.11.56]) by pentafluge.infradead.org with smtp (Exim 4.14 #3 (Red Hat Linux)) id 19D1bT-0007nJ-9q for ; Tue, 06 May 2003 13:31:27 +0100 Message-ID: <3EB7AA75.7B0DACF5@thales-e-transactions.com> Date: Tue, 06 May 2003 14:28:37 +0200 From: "Eric DEJONC" MIME-Version: 1.0 To: =?iso-8859-1?Q?J=F6rn?= Engel References: <3EB7A6AC.ED381D4C@thales-e-transactions.com> <20030506122442.GD15261@wohnheim.fh-wedel.de> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit cc: linux-mtd@lists.infradead.org Subject: Re: reverse mkfs.jffs2 List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Well, thank you, I did not think to loopback, thats a great idea. I'm gonna test. the only little problem is that the 10M jffs2 file should take a long time to be sent on the board via a serial port (the only one I can use). Berst regards, Eric Jörn Engel a écrit : > On Tue, 6 May 2003 14:12:28 +0200, Eric DEJONC wrote: > > > > I was wondering if someone had already done a prog that reverse > > mkfs.jffs2? > > > > I'd like to open a jffs2 ramdisk made by someone else, but I don't have > > enough space on my flash disk. So I would like to open it, but from the > > host machine that doesn't handle jffs2. > > Use one of mtdram or mtdblock and use that. You can make a block > device from your image with loopback. Should be enough, I guess. > > Jörn > > -- > Good warriors cause others to come to them and do not go to others. > -- Sun Tzu