From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from [202.37.96.11] (helo=gatekeeper.tait.co.nz) by pentafluge.infradead.org with esmtp (Exim 4.22 #5 (Red Hat Linux)) id 1ACls6-0002u3-V1 for ; Thu, 23 Oct 2003 21:15:52 +0100 Received: from gatekeeper.tait.co.nz (localhost.localdomain [127.0.0.1]) by gatekeeper.tait.co.nz (8.11.2/8.9.3) with ESMTP id h9NKEcH28816 for ; Fri, 24 Oct 2003 09:14:38 +1300 Received: from sunstorm.tait.co.nz (sunstorm.tait.co.nz [172.25.40.9]) by gatekeeper.tait.co.nz (8.11.2/8.9.3) with ESMTP id h9NKEb228810 for ; Fri, 24 Oct 2003 09:14:37 +1300 Received: from tait.co.nz ([172.25.110.7]) by sunstorm.tait.co.nz (iPlanet Messaging Server 5.1 (built May 7 2001)) with ESMTP id <0HN800E7O88B2V@sunstorm.tait.co.nz> for linux-mtd@lists.infradead.org; Fri, 24 Oct 2003 09:14:35 +1300 (NZDT) Date: Fri, 24 Oct 2003 09:14:12 +1300 From: Robin Gilks To: mtd list Message-id: <3F983694.1060005@tait.co.nz> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii; format=flowed Content-transfer-encoding: 7BIT Subject: Building jffs2 utils? List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Greetings Can someone give a clue as to the correct way to cross compile the utils directory? Its find just running make using my existing (Mandrake 9.1 based) i386 system but a cross compile to powerpc-uclibc fails miserably on any jffs2 tools due to the zlib stuff not being found. All contributions to my knowledge gratefully received :-)) -- Robin Gilks Senior Design Engineer Phone: (+64)(3) 357 1569 Tait Electronics Fax : (+64)(3) 359 4632 PO Box 1645 Christchurch Email : robin.gilks@tait.co.nz New Zealand