Re: [PATCH v11 2/3] mtd: spi-nor: spansion: Add local function to discover page size

[<Tudor.Ambarus@microchip.com>]

On 4/18/22 08:41, tkuw584924@gmail.com wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
> 
> The page size check in s28hs512t fixup can be used for s25hs/hl-t as well.
> Move that to a newly created local function.
> 
> Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
> ---
> Changes in v11:
>   - Rebase on top of Tudor's series
>     https://patchwork.ozlabs.org/project/linux-mtd/list/?series=294490
>   - Add addr_width param
> 
>  drivers/mtd/spi-nor/spansion.c | 54 ++++++++++++++++++++--------------
>  1 file changed, 32 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
> index 6bcd25180af4..493240ebfd70 100644
> --- a/drivers/mtd/spi-nor/spansion.c
> +++ b/drivers/mtd/spi-nor/spansion.c
> @@ -177,6 +177,37 @@ static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
>         return 0;
>  }
> 
> +/**
> + * cypress_nor_set_page_size() - Set page size which corresponds to the flash
> + *                               configuration.
> + * @nor:       pointer to a 'struct spi_nor'
> + * @addr_width:        address width used in Read Any Register op
> + *
> + * The BFPT table advertises a 512B or 256B page size depending on part but the
> + * page size is actually configurable (with the default being 256B). Read from
> + * CFR3V[4] and set the correct size.
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +static int cypress_nor_set_page_size(struct spi_nor *nor, u8 addr_width)
> +{
> +       struct spi_mem_op op =
> +               CYPRESS_NOR_RD_ANY_REG_OP(addr_width, SPINOR_REG_CYPRESS_CFR3V,
> +                                         nor->bouncebuf);
> +       int ret;
> +
> +       ret = spi_nor_read_reg(nor, &op, nor->reg_proto);
> +       if (ret)
> +               return ret;
> +
> +       if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
> +               nor->params->page_size = 512;
> +       else
> +               nor->params->page_size = 256;
> +
> +       return 0;
> +}
> +
>  /**
>   * cypress_nor_octal_dtr_enable() - Enable octal DTR on Cypress flashes.
>   * @nor:               pointer to a 'struct spi_nor'
> @@ -231,28 +262,7 @@ static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor,
>                                      const struct sfdp_parameter_header *bfpt_header,
>                                      const struct sfdp_bfpt *bfpt)
>  {
> -       /*
> -        * The BFPT table advertises a 512B page size but the page size is
> -        * actually configurable (with the default being 256B). Read from
> -        * CFR3V[4] and set the correct size.
> -        */
> -       struct spi_mem_op op =
> -               CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR3V,
> -                                         nor->bouncebuf);
> -       int ret;
> -
> -       spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
> -
> -       ret = spi_mem_exec_op(nor->spimem, &op);
> -       if (ret)
> -               return ret;
> -
> -       if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
> -               nor->params->page_size = 512;
> -       else
> -               nor->params->page_size = 256;
> -
> -       return 0;
> +       return cypress_nor_set_page_size(nor, 3);

not related to this patch, but can we use nor->add_width instead of 3?

Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

>  }
> 
>  static const struct spi_nor_fixups s28hs512t_fixups = {
> --
> 2.25.1
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/