Re: mtdparts howto required!!

[Robin Gilks <robin.gilks@tait.co.nz>]

Don't you just love it when someone replies to their own post!!

Problem solved - it would be nice if it were written down somewhere that 
the physmap.c example is only that - a non-working example in that it 
doesn't define a master mtd device which means you can't define the 
partitions on it!!

Also, when a master device is defined there is nothing to indicate that 
the mtdparts command line has to use the same name as the mtd_id - in 
fact I've found nothing that defines what mtd_id is. Who would have 
believed that I needed a command line of the form
mtdparts=phys_mapped_flash:7M(jffs2),256K(u-boot),-(kernel)
in order to use the default name (which doesn't work for reasons above 
anyway!!)

Oh well - its kept me entertained for 3 days instead of doing real work...

Robin Gilks wrote:
> Greetings
> 
> I'm trying to map 3 partitions into a single flash device using the 
> mtdparts command line stuff. I'm using a 2.4.22 kernel cross compiled 
> from i686 to PowerPC with mtd patches from CVS as of 19th Feb.
> 
[snip]


-- 
Robin Gilks
Senior Design Engineer          Phone: (+64)(3) 357 1569
Tait Electronics                Fax  :  (+64)(3) 359 4632
PO Box 1645 Christchurch        Email : robin.gilks@tait.co.nz
New Zealand