From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from web02.manitu.net ([217.11.48.102]) by pentafluge.infradead.org with esmtp (Exim 4.30 #5 (Red Hat Linux)) id 1BHh0S-0007Gg-TM for linux-mtd@lists.infradead.org; Sun, 25 Apr 2004 11:37:04 +0100 Message-ID: <408B94CC.4070002@treimers.net> Date: Sun, 25 Apr 2004 12:37:00 +0200 From: Thorsten Reimers MIME-Version: 1.0 To: Thorsten Reimers References: <400C1C7E.2090404@treimers.net> In-Reply-To: <400C1C7E.2090404@treimers.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit cc: linux-mtd@lists.infradead.org Subject: Re: Problem booting from DiskOnChip 2000 List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello, I have been able to fix the problem by downloading the DiskOnChip tools from M-System (www.m-sys.com) by reformatting the chip and rewriting the True-FFS Bios. Thorsten Thorsten Reimers wrote: > Hi all, > > I have a board with a DiskOnChip 200 module from M-System. I have been > able, to start the driver as a module and partitioning and fromatting > the chip. I am struggling to boot from it, does anybody have an idea? > > Find below the messages from my Bios and from Linux during boot (from > floppy). > > BIOS Messages > ============= > > DOC Socket Services - Version 0.2 > (C) Copyright 1992-1996, M-Systems Ltd. > > TrueFFF-BIOS -- Version 3.3.9 for DiskOnChip 2000 (V4.3) > Copryright (C) M-Systems, 1992-2001 > > Linux Boot Messages > =================== > Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/mtdcore.o > Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/nand/nand_ids.o > Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/devices/docecc.o > Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/devices/doc2000.o > Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/mtd_bkl_devs.o > DiskOnChip 2000 found at address 0xD8000 > Flash chip foind: Manufacturer ID: 98, Chip ID: E6 (Toshiba: NAND 8MiB > 3,3V) > 3 flash chips found. Total DiskOnChip size: 24 MiB > Ignoring DiskOnChip 2000 at 0xDA000 - already configured > Ignoring DiskOnChip 2000 at 0xDC000 - already configured > Ignoring DiskOnChip 2000 at 0xDE000 - already configured > Using /opt/files/lib/modules/2.4.23/kernel/drivers/devices/docprobe.o > NFTL driver: nftlcore.c $Revision: 1.94 $, nftlmount.c $Revision: 1.34 $ > NFTL: UnitSizeFactor 0x00 detected. This violates the spec but we think > we know what it means ... > > During boot it stop's after sending out only some characters from linux > load: > SYSLINUX 1.76 0x3d93445f > > Maybe I should clean the chip by a tool, maybe I should install a new > firmware on the chip? I tried it together with a hard disk with Windows > and the > disk-on-chip tools from MSystem. This worked really fine so I decided to > install Linux now. > > And, last but not least: Dave Woodhouse, I would like to apologize for > sending out an email to you (which you did answer nevertheless). I just > discovered this mailing list and how to get help. > > Thorsten > > Wer krank wird, erfährt als erstes, dass er selber Schuld hat. - Eugen > Drewermann > > -- ________________________________________ Thorsten Reimers Software-Engineering Consulting Training www.treimers.net Mobile: 0177 / 3265157