* [UBI][WL][PATCH] Rewrite the UBI wear-leveling unit
[not found] <1215519259.2706.19.camel@localhost.localdomain>
@ 2008-07-08 12:14 ` xiaochuan-xu
2008-07-08 12:35 ` Artem Bityutskiy
1 sibling, 0 replies; 3+ messages in thread
From: xiaochuan-xu @ 2008-07-08 12:14 UTC (permalink / raw)
To: linux-mtd
Hi Artem
I've commit my patch to the 'ubi-2.6.git'.
Have not you received it?
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
*/
-int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
- struct ubi_vid_hdr *vid_hdr)
+int ubi_eba_copy_leb(struct ubi_device *ubi, unsigned int from,
+ unsigned int to, struct ubi_vid_hdr *vid_hdr)
{
int err, vol_id, lnum, data_size, aldata_size, idx;
struct ubi_volume *vol;
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 940f6b7..dc5cea7 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -37,6 +37,8 @@
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
*/
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
*/
-int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
- struct ubi_vid_hdr *vid_hdr)
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
*/
-int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
- struct ubi_vid_hdr *vid_hdr)
+int ubi_eba_copy_leb(struct ubi_device *ubi, unsigned int from,
+ unsigned int to, struct ubi_vid_hdr *vid_hdr)
{
int err, vol_id, lnum, data_size, aldata_size, idx;
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
*/
-int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
- struct ubi_vid_hdr *vid_hdr)
+int ubi_eba_copy_leb(struct ubi_device *ubi, unsigned int from,
+ unsigned int to, struct ubi_vid_hdr *vid_hdr)
{
int err, vol_id, lnum, data_size, aldata_size, idx;
struct ubi_volume *vol;
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
*/
-int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
- struct ubi_vid_hdr *vid_hdr)
+int ubi_eba_copy_leb(struct ubi_device *ubi, unsigned int from,
+ unsigned int to, struct ubi_vid_hdr *vid_hdr)
{
int err, vol_id, lnum, data_size, aldata_size, idx;
struct ubi_volume *vol;
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
*/
-int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
- struct ubi_vid_hdr *vid_hdr)
+int ubi_eba_copy_leb(struct ubi_device *ubi, unsigned int from,
+ unsigned int to, struct ubi_vid_hdr *vid_hdr)
{
int err, vol_id, lnum, data_size, aldata_size, idx;
struct ubi_volume *vol;
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 940f6b7..dc5cea7 100644
commit a08148c87da6b49ecd41d84007eba7c4e0d17e33
Author: root <root@xxc.(none)>
Date: Tue Jul 8 15:25:19 2008 +0800
UBI: Wear Leveling unit improvement.
Rewrite the UBI wear-leveling unit and Implemented
two-dimension(PEB erase counter, LEB temperature)
wear leveling algorithm.
Signed-off-by: XiaoChuan-Xu <xiaochuan-xu@cqu.edu.cn>
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 3f06310..f850900 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -16,8 +16,8 @@ config MTD_UBI
config MTD_UBI_WL_THRESHOLD
int "UBI wear-leveling threshold"
- default 4096
- range 2 65536
+ default 20
+ range 10 100
depends on MTD_UBI
help
This parameter defines the maximum difference between the
highest
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 8dc488f..2a2ad33 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -957,8 +957,8 @@ write_error:
* because a bit-flip was detected at the target PEB);
* o %2 if the volume is being deleted and this LEB should not be
moved.
*/
-int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
- struct ubi_vid_hdr *vid_hdr)
+int ubi_eba_copy_leb(struct ubi_device *ubi, unsigned int from,
+ unsigned int to, struct ubi_vid_hdr *vid_hdr)
{
int err, vol_id, lnum, data_size, aldata_size, idx;
struct ubi_volume *vol;
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 940f6b7..dc5cea7 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -37,6 +37,8 @@
#include <linux/string.h>
#include <linux/vmalloc.h>
#include <linux/mtd/mtd.h>
+
+//#include <mtd/ubi-header.h>
#include <linux/mtd/ubi.h>
#include "ubi-media.h"
@@ -54,9 +56,11 @@
/* UBI warning messages */
#define ubi_warn(fmt, ...) printk(KERN_WARNING "UBI warning: %s: " fmt
"\n", \
__func__, ##__VA_ARGS__)
+ //__FUNCTION__, ##__VA_ARGS__)
/* UBI error messages */
#define ubi_err(fmt, ...) printk(KERN_ERR "UBI error: %s: " fmt "\n", \
__func__, ##__VA_ARGS__)
+ //__FUNCTION__, ##__VA_ARGS__)
/* Lowest number PEBs reserved for bad PEB handling */
#define MIN_RESEVED_PEBS 2
@@ -95,9 +99,11 @@ enum {
/**
* struct ubi_wl_entry - wear-leveling entry.
- * @rb: link in the corresponding RB-tree
- * @ec: erase counter
+ * @rb: link in the corresponding (free or used) RB-tree
+ * @ec: erase counter, the key of free RB-tree
+ * @temp: data temperature,i.e., data change frequentation
* @pnum: physical eraseblock number
+ * @status: the status of this entry
*
* This data structure is used in the WL unit. Each physical eraseblock
has a
* corresponding &struct wl_entry object which may be kept in different
@@ -105,8 +111,10 @@ enum {
*/
struct ubi_wl_entry {
struct rb_node rb;
- int ec;
- int pnum;
+ unsigned int ec;
+ unsigned int pnum;
+ unsigned long long temp;
+ //unsigned short status;
};
/**
@@ -369,21 +377,17 @@ struct ubi_device {
struct rb_root used;
struct rb_root free;
struct rb_root scrub;
- struct {
- struct rb_root pnum;
- struct rb_root aec;
- } prot;
- spinlock_t wl_lock;
- struct mutex move_mutex;
- struct rw_semaphore work_sem;
+ spinlock_t wl_lock; //protect free tree & used tree
+
+ struct list_head works;
+// spinlock_t work_lock; //protect work queue
+
int wl_scheduled;
+ struct mutex move_mutex; //protect used tree from put while wear
levelin
+
+ struct rw_semaphore work_sem;
struct ubi_wl_entry **lookuptbl;
- unsigned long long abs_ec;
- struct ubi_wl_entry *move_from;
- struct ubi_wl_entry *move_to;
- int move_to_put;
- struct list_head works;
- int works_count;
+
struct task_struct *bgt_thread;
int thread_enabled;
char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2];
@@ -474,9 +478,10 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi,
struct ubi
int used_ebs);
int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume
*vol,
int lnum, const void *buf, int len, int
dtype);
-int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
+int ubi_eba_copy_leb(struct ubi_device *ubi, unsigned int from,
unsigned int to
struct ubi_vid_hdr *vid_hdr);
int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info
*si);
+void ubi_eba_close(const struct ubi_device *ubi);
/* wl.c */
int ubi_wl_get_peb(struct ubi_device *ubi, int dtype);
@@ -629,3 +634,4 @@ static inline int idx2vol_id(const struct ubi_device
*ubi, i
}
#endif /* !__UBI_UBI_H__ */
+
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index cc8fe29..b25c491 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -16,6 +16,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
USA
*
* Authors: Artem Bityutskiy (Битюцкий Артём), Thomas Gleixner
+ *
+ *
+ * 2008-07-07 Xiaochuan-Xu (xiaochuan-xu@cqu.edu.cn)
+ * Rewrite the UBI wear-leveling unit and
Implemented
+ * two-dimension(PEB erase counter, LEB
temperature)
+ * wear leveling algorithm.
*/
/*
@@ -52,132 +58,89 @@
* physical eraseblock, it has to be moved. Technically this is the
same as
* moving it for wear-leveling reasons.
*
- * As it was said, for the UBI unit all physical eraseblocks are either
"free"
- * or "used". Free eraseblock are kept in the @wl->free RB-tree, while
used
- * eraseblocks are kept in a set of different RB-trees: @wl->used,
- * @wl->prot.pnum, @wl->prot.aec, and @wl->scrub.
+ * the KEY algorithm is in the 'ubi_wl_get_peb()' function and
@ubi->used
+ * RB-tree the former is get a 'optimal' physical eraseblock (PEB) and
insert
+ * it int to @ubi->used RB-tree. Look at the function for the details.
and the
+ * later uses (PEB erase counter, LEB 'temperature') pair as it's key
wods in
+ * the RB-tree. NOTICE, erase counter first, temperature second, which
make
+ * the younger PEB the earlier to be wear-leveled. and the second key
+ * @e->temp ensures that the younger LEB the earlier to be
wear-leveled.
+ * So, younger PEB stores younger LEB, older LEB resides in older PEB.
*
- * Note, in this implementation, we keep a small in-RAM object for each
physica
- * eraseblock. This is surely not a scalable solution. But it appears
to be goo
- * enough for moderately large flashes and it is simple. In future, one
may
- * re-work this unit and make it more scalable.
+ * AND, in order to impove the unit's concurrency, i.e., @ubi->wl_lock
should
+ * be used more fine grit(has not been finished), SEVEN status of
wl-entryare
+ * maintained AMONG wear-leveling working and share the @e->temp.
+ * State diagram is following:
*
- * At the moment this unit does not utilize the sequence number, which
was
- * introduced relatively recently. But it would be wise to do this
because the
- * sequence number of a logical eraseblock characterizes how old is it.
For
- * example, when we move a PEB with low erase counter, and we need to
pick the
- * target PEB, we pick a PEB with the highest EC if our PEB is "old"
and we
- * pick target PEB with an average EC if our PEB is not very "old".
This is a
- * room for future re-works of the WL unit.
+ * -----<----------PUT -------<-----------
+ * | | | |
+ * FREE---<---\ | | ---<---USED/SCRUB
+ * | \ | | | |
+ * | \ | MOVE_FROM--->-------
+ * | \ | |
+ * ----->---- MOVE_TO------------->-------
+ *
+ * the last status is DIRTY, which is a error status.
+ * USED status stands for wl-entry with @e->temp is not smaller then
+ * UBI_WL_USED_INIT.
*
- * FIXME: looks too complex, should be simplified (later).
*/
+
#include <linux/slab.h>
#include <linux/crc32.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include "ubi.h"
-/* Number of physical eraseblocks reserved for wear-leveling purposes
*/
-#define WL_RESERVED_PEBS 1
-/*
- * How many erase cycles are short term, unknown, and long term
physical
- * eraseblocks protected.
- */
-#define ST_PROTECTION 16
-#define U_PROTECTION 10
-#define LT_PROTECTION 4
+#define UBI_WL_EC_DELTA CONFIG_MTD_UBI_WL_THRESHOLD
+#define UBI_WL_TEMP_DELTA 10
/*
- * Maximum difference between two erase counters. If this threshold is
- * exceeded, the WL unit starts moving data from used physical
eraseblocks with
- * low erase counter to free physical eraseblocks with high erase
counter.
+ * global temperature of wear leveling entries. I don't use
@ubi->global_sqnum
+ * to implement this function. Because with my own @global_temp, some
other
+ * function can be implement easily. such as @e->temp uniqueness and
entry
+ * status,the later is useful to improve the concurrency of WL unit
+ * (has not implement yet)
*/
-#define UBI_WL_THRESHOLD CONFIG_MTD_UBI_WL_THRESHOLD
+static unsigned long long global_temp;
/*
- * When a physical eraseblock is moved, the WL unit has to pick the
target
- * physical eraseblock to move to. The simplest way would be just to
pick the
- * one with the highest erase counter. But in certain workloads this
could lead
- * to an unlimited wear of one or few physical eraseblock. Indeed,
imagine a
- * situation when the picked physical eraseblock is constantly erased
after the
- * data is written to it. So, we have a constant which limits the
highest erase
- * counter of the free physical eraseblock to pick. Namely, the WL unit
does
- * not pick eraseblocks with erase counter greater then the lowest
erase
- * counter plus %WL_FREE_MAX_DIFF.
+ * Maximum number of consecutive background thread failures
+ * which is enough to switch to read-only mode.
*/
-#define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
+#define WL_MAX_FAILURES 32
+
+/* Number of physical eraseblocks reserved for wear-leveling purposes
*/
+#define WL_RESERVED_PEBS 1
+
+enum {
+ UBI_WL_ENTRY_MIN = 0,
+ UBI_WL_ENTRY_QUARTER,
+ UBI_WL_ENTRY_HALF,
+ UBI_WL_ENTRY_SPEC
+};
/*
- * Maximum number of consecutive background thread failures which is
enough to
- * switch to read-only mode.
+ * the status of wear-leveling entry, with is share the @e->temp
+ * with temperature.
*/
-#define WL_MAX_FAILURES 32
+#define UBI_WL_SCRUB ((unsigned long long)0)
+#define UBI_WL_FREE ((unsigned long long)1)
+#define UBI_WL_PUT ((unsigned long long)2)
+#define UBI_WL_MOVE_FROME ((unsigned long long)3)
+#define UBI_WL_MOVE_TO ((unsigned long long)4)
+#define UBI_WL_DIRTY ((unsigned long long)5)
+#define UBI_WL_USED_INIT ((unsigned long long)6)
-/**
- * struct ubi_wl_prot_entry - PEB protection entry.
- * @rb_pnum: link in the @wl->prot.pnum RB-tree
- * @rb_aec: link in the @wl->prot.aec RB-tree
- * @abs_ec: the absolute erase counter value when the protection ends
- * @e: the wear-leveling entry of the physical eraseblock under
protection
- *
- * When the WL unit returns a physical eraseblock, the physical
eraseblock is
- * protected from being moved for some "time". For this reason, the
physical
- * eraseblock is not directly moved from the @wl->free tree to the
@wl->used
- * tree. There is one more tree in between where this physical
eraseblock is
- * temporarily stored (@wl->prot).
- *
- * All this protection stuff is needed because:
- * o we don't want to move physical eraseblocks just after we have
given them
- * to the user; instead, we first want to let users fill them up
with data;
- *
- * o there is a chance that the user will put the physical eraseblock
very
- * soon, so it makes sense not to move it for some time, but wait;
this is
- * especially important in case of "short term" physical
eraseblocks.
- *
- * Physical eraseblocks stay protected only for limited time. But the
"time" is
- * measured in erase cycles in this case. This is implemented with help
of the
- * absolute erase counter (@wl->abs_ec). When it reaches certain value,
the
- * physical eraseblocks are moved from the protection trees
(@wl->prot.*) to
- * the @wl->used tree.
- *
- * Protected physical eraseblocks are searched by physical eraseblock
number
- * (when they are put) and by the absolute erase counter (to check if
it is
- * time to move them to the @wl->used tree). So there are actually 2
RB-trees
- * storing the protected physical eraseblocks: @wl->prot.pnum and
- * @wl->prot.aec. They are referred to as the "protection" trees. The
- * first one is indexed by the physical eraseblock number. The second
one is
- * indexed by the absolute erase counter. Both trees store
- * &struct ubi_wl_prot_entry objects.
- *
- * Each physical eraseblock has 2 main states: free and used. The
former state
- * corresponds to the @wl->free tree. The latter state is split up on
several
- * sub-states:
- * o the WL movement is allowed (@wl->used tree);
- * o the WL movement is temporarily prohibited (@wl->prot.pnum and
- * @wl->prot.aec trees);
- * o scrubbing is needed (@wl->scrub tree).
- *
- * Depending on the sub-state, wear-leveling entries of the used
physical
- * eraseblocks may be kept in one of those trees.
- */
-struct ubi_wl_prot_entry {
- struct rb_node rb_pnum;
- struct rb_node rb_aec;
- unsigned long long abs_ec;
- struct ubi_wl_entry *e;
-};
/**
* struct ubi_work - UBI work description data structure.
* @list: a link in the list of pending works
* @func: worker function
- * @priv: private data of the worker function
- *
* @e: physical eraseblock to erase
- * @torture: if the physical eraseblock has to be tortured
+ * @flag: the argument of @func function
*
* The @func pointer points to the worker function. If the @cancel
argument is
* not zero, the worker has to free the resources and exit immediately.
The
@@ -189,34 +152,27 @@ struct ubi_work {
int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int
cancel);
/* The below fields are only relevant to erasure works */
struct ubi_wl_entry *e;
- int torture;
+ int flag;
};
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec);
-static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
- struct rb_root *root);
-#else
-#define paranoid_check_ec(ubi, pnum, ec) 0
-#define paranoid_check_in_wl_tree(e, root)
-#endif
/**
- * wl_tree_add - add a wear-leveling entry to a WL RB-tree.
+ * wl_add_free_tree - add a wear-leveling entry to the free RB-tree.
* @e: the wear-leveling entry to add
* @root: the root of the tree
*
* Note, we use (erase counter, physical eraseblock number) pairs as
keys in
- * the @ubi->used and @ubi->free RB-trees.
+ * the @ubi->free RB-trees. LOCK must hold before beeing invoked.
*/
-static void wl_tree_add(struct ubi_wl_entry *e, struct rb_root *root)
+static void wl_add_free_tree(struct ubi_wl_entry *e, struct rb_root
*root)
{
struct rb_node **p, *parent = NULL;
+ struct ubi_wl_entry *e1;
+
+ ubi_assert(e);
p = &root->rb_node;
while (*p) {
- struct ubi_wl_entry *e1;
-
parent = *p;
e1 = rb_entry(parent, struct ubi_wl_entry, rb);
@@ -233,204 +189,294 @@ static void wl_tree_add(struct ubi_wl_entry *e,
struct r
}
}
+ e->temp = UBI_WL_FREE;
rb_link_node(&e->rb, parent, p);
rb_insert_color(&e->rb, root);
+ dbg_wl("added PEB %d ec %u temp %llu to free tree",
+ e->pnum, e->ec, e->temp);
}
/**
- * do_work - do one pending work.
- * @ubi: UBI device description object
+ * wl_add_used_tree - add a wear-leveling entry to the used RB-tree.
+ * @e: the wear-leveling entry to add
+ * @root: the root of the tree
*
- * This function returns zero in case of success and a negative error
code in
- * case of failure.
+ * Note, we use (temperature, physical eraseblock number) pairs as keys
in
+ * the @ubi->used RB-trees. LOCK must hold before beeing invoked.
*/
-static int do_work(struct ubi_device *ubi)
+static void wl_add_used_tree(struct ubi_wl_entry *e, struct rb_root
*root)
{
- int err;
- struct ubi_work *wrk;
+ struct rb_node **p, *parent = NULL;
- cond_resched();
+ ubi_assert(e);
- /*
- * @ubi->work_sem is used to synchronize with the workers.
Workers take
- * it in read mode, so many of them may be doing works at a
time. But
- * the queue flush code has to be sure the whole queue of works
is
- * done, and it takes the mutex in write mode.
- */
- down_read(&ubi->work_sem);
- spin_lock(&ubi->wl_lock);
- if (list_empty(&ubi->works)) {
- spin_unlock(&ubi->wl_lock);
- up_read(&ubi->work_sem);
- return 0;
- }
+ p = &root->rb_node;
+ e->temp = global_temp++;
+
+ while (*p) {
+ struct ubi_wl_entry *e1;
- wrk = list_entry(ubi->works.next, struct ubi_work, list);
- list_del(&wrk->list);
- ubi->works_count -= 1;
- ubi_assert(ubi->works_count >= 0);
- spin_unlock(&ubi->wl_lock);
+ parent = *p;
+ e1 = rb_entry(parent, struct ubi_wl_entry, rb);
- /*
- * Call the worker function. Do not touch the work structure
- * after this call as it will have been freed or reused by that
- * time by the worker function.
- */
- err = wrk->func(ubi, wrk, 0);
- if (err)
- ubi_err("work failed with error code %d", err);
- up_read(&ubi->work_sem);
+ if (e->ec < e1->ec)
+ p = &(*p)->rb_left;
+ else if (e->ec > e1->ec)
+ p = &(*p)->rb_right;
+ else {
+ if (e->temp < e1->temp)
+ p = &(*p)->rb_left;
+ else if (e->temp > e1->temp)
+ p = &(*p)->rb_right;
+ else {
+ ubi_assert(e->pnum != e1->pnum);
+ if (e->pnum < e1->pnum)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ }
+ }
+ }
- return err;
+ rb_link_node(&e->rb, parent, p);
+ rb_insert_color(&e->rb, root);
+ dbg_wl("added PEB %d ec %u temp %llu to used tree",
+ e->pnum, e->ec, e->temp);
}
+
/**
- * produce_free_peb - produce a free physical eraseblock.
- * @ubi: UBI device description object
+ * wl_add_scrub_tree - add a scrub entry to the scrub RB-tree.
+ * @e: the wear-leveling entry to add
+ * @root: the root of the tree
*
- * This function tries to make a free PEB by means of synchronous
execution of
- * pending works. This may be needed if, for example the background
thread is
- * disabled. Returns zero in case of success and a negative error code
in case
- * of failure.
+ * Note, we use physical eraseblock number as keys in the @ubi->scrub
+ * RB-trees. LOCK must hold before beeing invoked.
*/
-static int produce_free_peb(struct ubi_device *ubi)
+static void wl_add_scrub_tree(struct ubi_wl_entry *e, struct rb_root
*root)
{
- int err;
+ struct rb_node **p, *parent = NULL;
- spin_lock(&ubi->wl_lock);
- while (!ubi->free.rb_node) {
- spin_unlock(&ubi->wl_lock);
+ ubi_assert(e);
+ p = &root->rb_node;
+
+ while (*p) {
+ struct ubi_wl_entry *e1;
- dbg_wl("do one work synchronously");
- err = do_work(ubi);
- if (err)
- return err;
+ parent = *p;
+ e1 = rb_entry(parent, struct ubi_wl_entry, rb);
- spin_lock(&ubi->wl_lock);
+ if (e->pnum < e1->pnum)
+ p = &(*p)->rb_left;
+ else if (e->pnum> e1->pnum)
+ p = &(*p)->rb_right;
+ else
+ return;
}
- spin_unlock(&ubi->wl_lock);
- return 0;
+ e->temp = UBI_WL_SCRUB;
+ rb_link_node(&e->rb, parent, p);
+ rb_insert_color(&e->rb, root);
+ dbg_wl("added PEB %d ec %u temp %llu to used tree",
+ e->pnum, e->ec, e->temp);
}
/**
- * in_wl_tree - check if wear-leveling entry is present in a WL
RB-tree.
- * @e: the wear-leveling entry to check
- * @root: the root of the tree
+ * wl_move_free_to_used - move a free PEB to used RB-tree
+ * @ubi: ubi device
+ * @e: wear leveling entry of the moved PEB
+ *
+ * NOTICE: LOCK must be held before being invoked,
+ * and %e->temp must be initialized.
+ */
+ static inline void wl_move_free_to_used(struct ubi_device *ubi,
+ struct ubi_wl_entry *e)
+{
+ /*
+ * firstly, erase the entry %e from free RB-tree.
+ * secondly, insort the entry %e into used RB-tree.
+ * and the, change the status
+ */
+ rb_erase(&e->rb, &ubi->free);
+ wl_add_used_tree(e, &ubi->used);
+}
+
+
+/**
+ * wl_find_free_entry - find a free entry from free RB-tree.
+ * @root: free RB-tree's root
+ * @key: the key (ec) of entry looked for. UBI_WL_ENTRY_*
+ * @ec: the number of the key only when key is equal to
UBI_WL_ENTRY_SPEC
*
- * This function returns non-zero if @e is in the @root RB-tree and
zero if it
- * is not.
+ * This function looks for a wear leveling entry with ec equal to or
+ * closest to @ec. the address of such ubi_wl_entry expected is
returned
+ * in case of successl, nor NULL.
*/
-static int in_wl_tree(struct ubi_wl_entry *e, struct rb_root *root)
+static struct ubi_wl_entry* wl_find_free_entry(struct rb_root *root,
+ int key, unsigned int
ec)
{
- struct rb_node *p;
+ struct ubi_wl_entry *e = NULL;
+ struct rb_node *p = root->rb_node;
+
+ if (!p)
+ goto out_fault;
+
+ switch(key) {
+ case UBI_WL_ENTRY_MIN:
+ e = rb_entry(rb_first(root), struct
ubi_wl_entry, rb);
+ goto out_found;
+ case UBI_WL_ENTRY_QUARTER:
+ ec = (rb_entry(p, struct ubi_wl_entry, rb))->ec;
+ ec+=(rb_entry(rb_first(root),
+ struct ubi_wl_entry, rb))->ec;
+ ec >>= 1;
+ break;
+ case UBI_WL_ENTRY_HALF:
+ e = rb_entry(p, struct ubi_wl_entry, rb);
+ goto out_found;
+ case UBI_WL_ENTRY_SPEC:
+ break;
+ default:
+ ubi_err("error, unkown parameter of key");
+ goto out_fault;
+ }
- p = root->rb_node;
- while (p) {
+ while (p) {
struct ubi_wl_entry *e1;
-
e1 = rb_entry(p, struct ubi_wl_entry, rb);
-
- if (e->pnum == e1->pnum) {
- ubi_assert(e == e1);
- return 1;
- }
-
- if (e->ec < e1->ec)
+
+ if (e1->ec > ec) {
p = p->rb_left;
- else if (e->ec > e1->ec)
+ } else if (e1->ec == ec) {
+ e = e1;
+ break;
+ } else {
p = p->rb_right;
- else {
- ubi_assert(e->pnum != e1->pnum);
- if (e->pnum < e1->pnum)
- p = p->rb_left;
- else
- p = p->rb_right;
+ e = e1;
}
}
+
+out_found:
+ dbg_wl("found PEB %d ec %u temp %llu in free tree",
+ e->pnum, e->ec, e->temp);
+ return e;
+out_fault:
+ dbg_wl("can NOT found a PEB in free tree");
+ return NULL;
+}
- return 0;
+
+/**
+ * wl_find_used_min_entry - find the minisum used entry from used
RB-tree.
+ * @root: used RB-tree's root
+ *
+ * the address of such ubi_wl_entry expected is returned
+ * in case of successl, nor NULL.
+ */
+static struct ubi_wl_entry* wl_find_used_min_entry(struct rb_root
*root)
+{
+ struct ubi_wl_entry *e = NULL;
+ struct rb_node *p = root->rb_node;
+
+ ubi_assert(p);
+
+ e = rb_entry(rb_first(root), struct ubi_wl_entry, rb);
+
+ if (e) {
+ dbg_wl("found PEB %d ec %u temp %llu in used tree",
+ e->pnum, e->ec,
e->temp);
+ } else {
+ dbg_wl("can NOT found a PEB in used tree");
+ }
+
+ return e;
}
/**
- * prot_tree_add - add physical eraseblock to protection trees.
+ * wl_do_work - do one pending work synchronously.
* @ubi: UBI device description object
- * @e: the physical eraseblock to add
- * @pe: protection entry object to use
- * @abs_ec: absolute erase counter value when this physical eraseblock
has
- * to be removed from the protection trees.
*
- * @wl->lock has to be locked.
+ * This function do a pending work if any on the works queue.
+ * returns:
+ * o %0: in case of success
+ * o %1: has no pending work AT PRESENT. and
+ * o a negative error code if error.
*/
-static void prot_tree_add(struct ubi_device *ubi, struct ubi_wl_entry
*e,
- struct ubi_wl_prot_entry *pe, int abs_ec)
+static int wl_do_work(struct ubi_device *ubi)
{
- struct rb_node **p, *parent = NULL;
- struct ubi_wl_prot_entry *pe1;
-
- pe->e = e;
- pe->abs_ec = ubi->abs_ec + abs_ec;
+ int err = 0;
+ struct ubi_work *work;
- p = &ubi->prot.pnum.rb_node;
- while (*p) {
- parent = *p;
- pe1 = rb_entry(parent, struct ubi_wl_prot_entry,
rb_pnum);
+ cond_resched();
- if (e->pnum < pe1->e->pnum)
- p = &(*p)->rb_left;
- else
- p = &(*p)->rb_right;
+ /*
+ * @ubi->work_sem is used to synchronize with the workers.
Workers take
+ * it in read mode, so many of them may be doing works at a
time. But
+ * the queue flush code has to be sure the whole queue of works
is
+ * done, and it takes the mutex in write mode.
+ */
+ down_read(&ubi->work_sem);
+ //spin_lock(&ubi->work_lock);
+ spin_lock(&ubi->wl_lock);
+ if (list_empty(&ubi->works)) {
+ //spin_unlock(&ubi->work_lock);
+ spin_unlock(&ubi->wl_lock);
+ up_read(&ubi->work_sem);
+ return 1;
}
- rb_link_node(&pe->rb_pnum, parent, p);
- rb_insert_color(&pe->rb_pnum, &ubi->prot.pnum);
- p = &ubi->prot.aec.rb_node;
- parent = NULL;
- while (*p) {
- parent = *p;
- pe1 = rb_entry(parent, struct ubi_wl_prot_entry,
rb_aec);
+ work = list_entry(ubi->works.next, struct ubi_work, list);
+ list_del(&work->list);
+ //spin_unlock(&ubi->work_lock);
+ spin_unlock(&ubi->wl_lock);
+
+ /*
+ * Call the worker function. Do not touch the work structure
+ * after this call as it will have been freed or reused by that
+ * time by the worker function.
+ */
+ err = work->func(ubi, work, 0);
+ up_read(&ubi->work_sem);
+
+ if (err)
+ ubi_err("work failed with error code %d", err);
- if (pe->abs_ec < pe1->abs_ec)
- p = &(*p)->rb_left;
- else
- p = &(*p)->rb_right;
- }
- rb_link_node(&pe->rb_aec, parent, p);
- rb_insert_color(&pe->rb_aec, &ubi->prot.aec);
+ return err;
}
+
/**
- * find_wl_entry - find wear-leveling entry closest to certain erase
counter.
- * @root: the RB-tree where to look for
- * @max: highest possible erase counter
+ * wl_produce_free_peb - produce a free physical eraseblock
synchronosly.
+ * @ubi: UBI device description object
*
- * This function looks for a wear leveling entry with erase counter
closest to
- * @max and less then @max.
+ * This function tries to make a free PEB by means of synchronous
execution of
+ * pending works. This may be needed if, for example the background
thread is
+ * disabled. Returns
+ * o %0: in case of success
+ * o %1: has not any PEB for erase
+ * o and a negative error code in case of failure.
*/
-static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int
max)
+static int wl_produce_free_peb(struct ubi_device *ubi)
{
- struct rb_node *p;
- struct ubi_wl_entry *e;
+ int err;
- e = rb_entry(rb_first(root), struct ubi_wl_entry, rb);
- max += e->ec;
+ dbg_wl("produce a free PEB synchronously");
+ spin_lock(&ubi->wl_lock);
+ while (!ubi->free.rb_node) {
+ spin_unlock(&ubi->wl_lock);
- p = root->rb_node;
- while (p) {
- struct ubi_wl_entry *e1;
+ err = wl_do_work(ubi);
+ if (err)
+ return err;
- e1 = rb_entry(p, struct ubi_wl_entry, rb);
- if (e1->ec >= max)
- p = p->rb_left;
- else {
- p = p->rb_right;
- e = e1;
- }
+ spin_lock(&ubi->wl_lock);
}
+ spin_unlock(&ubi->wl_lock);
- return e;
+ return 0;
}
+
/**
* ubi_wl_get_peb - get a physical eraseblock.
* @ubi: UBI device description object
@@ -441,140 +487,186 @@ static struct ubi_wl_entry *find_wl_entry(struct
rb_root
*/
int ubi_wl_get_peb(struct ubi_device *ubi, int dtype)
{
- int err, protect, medium_ec;
- struct ubi_wl_entry *e, *first, *last;
- struct ubi_wl_prot_entry *pe;
-
- ubi_assert(dtype == UBI_LONGTERM || dtype == UBI_SHORTTERM ||
- dtype == UBI_UNKNOWN);
-
- pe = kmalloc(sizeof(struct ubi_wl_prot_entry), GFP_NOFS);
- if (!pe)
- return -ENOMEM;
-
+ struct ubi_wl_entry *e;
+ int err;
+
+ ubi_assert(dtype == UBI_UNKNOWN ||
+ dtype == UBI_SHORTTERM ||
+ dtype == UBI_LONGTERM);
retry:
+
+ /*
+ * Checking if the free RB-tree is empty, and product one free
PEB
+ * synchronosly when empty.
+ */
spin_lock(&ubi->wl_lock);
if (!ubi->free.rb_node) {
- if (ubi->works_count == 0) {
- ubi_assert(list_empty(&ubi->works));
- ubi_err("no free eraseblocks");
+ //spin_lock(&ubi->work_lock);
+ if (list_empty(&ubi->works)) {
+ //spin_unlock(&ubi->work_lock);
spin_unlock(&ubi->wl_lock);
- kfree(pe);
+ ubi_err("no space for using in the ubi device");
return -ENOSPC;
}
+ //spin_unlock(&ubi->work_lock);
spin_unlock(&ubi->wl_lock);
- err = produce_free_peb(ubi);
+ err = wl_produce_free_peb(ubi);
if (err < 0) {
- kfree(pe);
return err;
}
goto retry;
}
+ /*
+ * For %unknown data we pick a physical eraseblock with
+ * quarter erase counter.
+ *
+ * For %short term data we pick a physical eraseblock
+ * with the lowest erase counter as we expect it will
+ * be erased soon.
+ *
+ * For %long term data we pick a physical eraseblock
+ * with the middle erase counter.
+ */
switch (dtype) {
- case UBI_LONGTERM:
- /*
- * For long term data we pick a physical
eraseblock
- * with high erase counter. But the highest
erase
- * counter we can pick is bounded by the the
lowest
- * erase counter plus %WL_FREE_MAX_DIFF.
- */
- e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
- protect = LT_PROTECTION;
- break;
case UBI_UNKNOWN:
- /*
- * For unknown data we pick a physical
eraseblock with
- * medium erase counter. But we by no means can
pick a
- * physical eraseblock with erase counter
greater or
- * equivalent than the lowest erase counter plus
- * %WL_FREE_MAX_DIFF.
- */
- first = rb_entry(rb_first(&ubi->free),
- struct ubi_wl_entry, rb);
- last = rb_entry(rb_last(&ubi->free),
- struct ubi_wl_entry, rb);
-
- if (last->ec - first->ec < WL_FREE_MAX_DIFF)
- e = rb_entry(ubi->free.rb_node,
- struct ubi_wl_entry,
rb);
- else {
- medium_ec = (first->ec +
WL_FREE_MAX_DIFF)/2;
- e = find_wl_entry(&ubi->free,
medium_ec);
- }
- protect = U_PROTECTION;
+ e = wl_find_free_entry(&ubi->free,
+ UBI_WL_ENTRY_QUARTER, 0);
break;
case UBI_SHORTTERM:
- /*
- * For short term data we pick a physical
eraseblock
- * with the lowest erase counter as we expect it
will
- * be erased soon.
- */
- e = rb_entry(rb_first(&ubi->free),
- struct ubi_wl_entry, rb);
- protect = ST_PROTECTION;
+ e = wl_find_free_entry(&ubi->free,
+ UBI_WL_ENTRY_MIN, 0);
+ break;
+ case UBI_LONGTERM:
+ e = wl_find_free_entry(&ubi->free,
+ UBI_WL_ENTRY_HALF, 0);
break;
default:
- protect = 0;
e = NULL;
- BUG();
+ ubi_err("bad parameter dtype");
}
+
+ if (e == NULL) {
+ spin_unlock(&ubi->wl_lock);
+ ubi_err("error, get no PEB");
+ return -ENOSPC;
+ }
/*
- * Move the physical eraseblock to the protection trees where it
will
- * be protected from being moved for some time.
+ * Move the physical eraseblock to the used RB-tree.
*/
- paranoid_check_in_wl_tree(e, &ubi->free);
- rb_erase(&e->rb, &ubi->free);
- prot_tree_add(ubi, e, pe, protect);
-
- dbg_wl("PEB %d EC %d, protection %d", e->pnum, e->ec, protect);
+ wl_move_free_to_used(ubi, e);
spin_unlock(&ubi->wl_lock);
+
+ dbg_wl("PEB %d ec %u temp %llu has moved into used RB-tree",
+ e->pnum, e->ec, e->temp);
return e->pnum;
}
+
/**
- * prot_tree_del - remove a physical eraseblock from the protection
trees
+ * schedule_ubi_work - schedule a work.
* @ubi: UBI device description object
- * @pnum: the physical eraseblock to remove
+ * @wrk: the work to schedule
*
- * This function returns PEB @pnum from the protection trees and
returns zero
- * in case of success and %-ENODEV if the PEB was not found in the
protection
- * trees.
+ * This function enqueues a work defined by @wrk to the tail of the
pending
+ * works list.
*/
-static int prot_tree_del(struct ubi_device *ubi, int pnum)
+static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work
*work)
{
- struct rb_node *p;
- struct ubi_wl_prot_entry *pe = NULL;
+ //spin_lock(&ubi->work_lock);
+ spin_lock(&ubi->wl_lock);
+ list_add_tail(&work->list, &ubi->works);
+
+ if (ubi->thread_enabled)
+ wake_up_process(ubi->bgt_thread);
+ //spin_unlock(&ubi->work_lock);
+ spin_unlock(&ubi->wl_lock);
+}
- p = ubi->prot.pnum.rb_node;
- while (p) {
+static int erase_worker(struct ubi_device *ubi, struct ubi_work
*wl_wrk,
+ int cancel);
- pe = rb_entry(p, struct ubi_wl_prot_entry, rb_pnum);
+/**
+ * wl_schedule_erase - schedule an erase work (asynchronously).
+ * @ubi: UBI device description object
+ * @e: the WL entry of the physical eraseblock to erase
+ * @flag:
+ * o %0x1: if the physical eraseblock has to be tortured
+ * o %0x2: if then erase worker has to schedule wl worker
+ * o %0x3: if both.
+ * This function returns zero in case of success and a %-ENOMEM in case
of
+ * failure.
+ */
+static int wl_schedule_erase(struct ubi_device *ubi, struct
ubi_wl_entry *e,
+ int flag)
+{
+ struct ubi_work *erase_work;
+
+ dbg_wl("schedule erasure of PEB %d, EC %d, flag %d",
+ e->pnum, e->ec, flag);
+ ubi_assert(e->temp == UBI_WL_PUT);
+
+ erase_work = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
+ if (!erase_work) {
+ e->temp = UBI_WL_DIRTY;
+ return -ENOMEM;
+ }
+ erase_work->func = &erase_worker;
+ erase_work->e = e;
+ erase_work->flag = flag;
- if (pnum == pe->e->pnum)
- goto found;
+ schedule_ubi_work(ubi, erase_work);
+ return 0;
+}
- if (pnum < pe->e->pnum)
- p = p->rb_left;
- else
- p = p->rb_right;
+
+static int wear_leveling_worker(struct ubi_device *ubi,
+ struct ubi_work *wrk, int
cancel);
+/**
+ * wl_schedule_wear_leveling - schedule wear-leveling if it is needed.
+ * @ubi: UBI device description object
+ *
+ * This function checks if it is time to start wear-leveling and
schedules it
+ * if yes. This function returns zero in case of success and a negative
error
+ * code in case of failure.
+ */
+static int wl_schedule_wear_leveling(struct ubi_device *ubi)
+{
+ int err = 0;
+ struct ubi_work *wl_work;
+
+ dbg_wl("schedule wear leveling worker");
+
+ spin_lock(&ubi->wl_lock);
+ if (ubi->wl_scheduled)
+ goto out_cancel;
+ ubi->wl_scheduled = 1;
+ spin_unlock(&ubi->wl_lock);
+
+ wl_work = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
+ if (!wl_work) {
+ err = -ENOMEM;
+ spin_lock(&ubi->wl_lock);
+ ubi->wl_scheduled = 0;
+ goto out_cancel;
}
- return -ENODEV;
+ wl_work->func = &wear_leveling_worker;
+ schedule_ubi_work(ubi, wl_work);
+ return err;
+
+out_cancel:
-found:
- ubi_assert(pe->e->pnum == pnum);
- rb_erase(&pe->rb_aec, &ubi->prot.aec);
- rb_erase(&pe->rb_pnum, &ubi->prot.pnum);
- kfree(pe);
- return 0;
+ spin_unlock(&ubi->wl_lock);
+ return err;
}
+
/**
- * sync_erase - synchronously erase a physical eraseblock.
+ * wl_erase_sync - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
* @e: the the physical eraseblock to erase
* @torture: if the physical eraseblock has to be tortured
@@ -582,17 +674,12 @@ found:
* This function returns zero in case of success and a negative error
code in
* case of failure.
*/
-static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
int tortu
+static int wl_erase_sync(struct ubi_device *ubi, struct ubi_wl_entry
*e,
+int torture)
{
int err;
struct ubi_ec_hdr *ec_hdr;
- unsigned long long ec = e->ec;
-
- dbg_wl("erase PEB %d, old EC %llu", e->pnum, ec);
-
- err = paranoid_check_ec(ubi, e->pnum, e->ec);
- if (err > 0)
- return -EINVAL;
+ unsigned int ec = e->ec;
ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
if (!ec_hdr)
@@ -608,13 +695,13 @@ static int sync_erase(struct ubi_device *ubi,
struct ubi_w
* Erase counter overflow. Upgrade UBI and use 64-bit
* erase counters internally.
*/
- ubi_err("erase counter overflow at PEB %d, EC %llu",
- e->pnum, ec);
+ ubi_err("fail to erase PEB %d, EC %u, erase counter
overflow",
+ e->pnum, ec);
err = -EINVAL;
goto out_free;
}
- dbg_wl("erased PEB %d, new EC %llu", e->pnum, ec);
+ dbg_wl("PEB %d, new EC %u has been erased", e->pnum, ec);
ec_hdr->ec = cpu_to_be64(ec);
@@ -623,6 +710,7 @@ static int sync_erase(struct ubi_device *ubi, struct
ubi_wl_
goto out_free;
e->ec = ec;
+
spin_lock(&ubi->wl_lock);
if (e->ec > ubi->max_ec)
ubi->max_ec = e->ec;
@@ -634,446 +722,192 @@ out_free:
}
/**
- * check_protection_over - check if it is time to stop protecting some
- * physical eraseblocks.
- * @ubi: UBI device description object
+ * wl_free_tree_present - check if wearleveling entry is present
+ * in the free RB-tree.
+ * @e: the wear-leveling entry to check
+ * @root: the root of the tree
*
- * This function is called after each erase operation, when the
absolute erase
- * counter is incremented, to check if some physical eraseblock have
not to be
- * protected any longer. These physical eraseblocks are moved from the
- * protection trees to the used tree.
+ * This function returns non-zero if @e is in the @root RB-tree and
+ * zero if it is not.
*/
-static void check_protection_over(struct ubi_device *ubi)
+static int wl_free_tree_present(struct ubi_wl_entry *e, struct rb_root
*root)
{
- struct ubi_wl_prot_entry *pe;
+ struct rb_node *p;
- /*
- * There may be several protected physical eraseblock to remove,
- * process them all.
- */
- while (1) {
- spin_lock(&ubi->wl_lock);
- if (!ubi->prot.aec.rb_node) {
- spin_unlock(&ubi->wl_lock);
- break;
- }
+ if (!e)
+ return 0;
+
+ p = root->rb_node;
+ while (p) {
+ struct ubi_wl_entry *e1;
- pe = rb_entry(rb_first(&ubi->prot.aec),
- struct ubi_wl_prot_entry, rb_aec);
+ e1 = rb_entry(p, struct ubi_wl_entry, rb);
- if (pe->abs_ec > ubi->abs_ec) {
- spin_unlock(&ubi->wl_lock);
- break;
+ if (e->pnum == e1->pnum) {
+ ubi_assert(e == e1);
+ return 1;
}
- dbg_wl("PEB %d protection over, abs_ec %llu, PEB abs_ec
%llu",
- pe->e->pnum, ubi->abs_ec, pe->abs_ec);
- rb_erase(&pe->rb_aec, &ubi->prot.aec);
- rb_erase(&pe->rb_pnum, &ubi->prot.pnum);
- wl_tree_add(pe->e, &ubi->used);
- spin_unlock(&ubi->wl_lock);
-
- kfree(pe);
- cond_resched();
+ if (e->ec < e1->ec)
+ p = p->rb_left;
+ else if (e->ec > e1->ec)
+ p = p->rb_right;
+ else {
+ ubi_assert(e->pnum != e1->pnum);
+ if (e->pnum < e1->pnum)
+ p = p->rb_left;
+ else
+ p = p->rb_right;
+ }
}
-}
-/**
- * schedule_ubi_work - schedule a work.
- * @ubi: UBI device description object
- * @wrk: the work to schedule
- *
- * This function enqueues a work defined by @wrk to the tail of the
pending
- * works list.
- */
-static void schedule_ubi_work(struct ubi_device *ubi, struct ubi_work
*wrk)
-{
- spin_lock(&ubi->wl_lock);
- list_add_tail(&wrk->list, &ubi->works);
- ubi_assert(ubi->works_count >= 0);
- ubi->works_count += 1;
- if (ubi->thread_enabled)
- wake_up_process(ubi->bgt_thread);
- spin_unlock(&ubi->wl_lock);
+ return 0;
}
-static int erase_worker(struct ubi_device *ubi, struct ubi_work
*wl_wrk,
- int cancel);
-
-/**
- * schedule_erase - schedule an erase work.
- * @ubi: UBI device description object
- * @e: the WL entry of the physical eraseblock to erase
- * @torture: if the physical eraseblock has to be tortured
- *
- * This function returns zero in case of success and a %-ENOMEM in case
of
- * failure.
- */
-static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry
*e,
- int torture)
-{
- struct ubi_work *wl_wrk;
-
- dbg_wl("schedule erasure of PEB %d, EC %d, torture %d",
- e->pnum, e->ec, torture);
-
- wl_wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
- if (!wl_wrk)
- return -ENOMEM;
- wl_wrk->func = &erase_worker;
- wl_wrk->e = e;
- wl_wrk->torture = torture;
-
- schedule_ubi_work(ubi, wl_wrk);
- return 0;
-}
/**
- * wear_leveling_worker - wear-leveling worker function.
- * @ubi: UBI device description object
- * @wrk: the work object
- * @cancel: non-zero if the worker has to free memory and exit
+ * wl_used_tree_present - check if wear-leveling entry is present
+ * in the used RB-tree.
+ * @e: the wear-leveling entry to check
+ * @root: the root of the tree
*
- * This function copies a more worn out physical eraseblock to a less
worn out
- * one. Returns zero in case of success and a negative error code in
case of
- * failure.
+ * This function returns non-zero if @e is in the @root RB-tree and
+ * zero if it is not.
*/
-static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work
*wrk,
- int cancel)
+static int wl_used_tree_present(struct ubi_wl_entry *e, struct rb_root
*root)
{
- int err, put = 0, scrubbing = 0, protect = 0;
- struct ubi_wl_prot_entry *uninitialized_var(pe);
- struct ubi_wl_entry *e1, *e2;
- struct ubi_vid_hdr *vid_hdr;
-
- kfree(wrk);
+ struct rb_node *p;
- if (cancel)
+ if (!e)
return 0;
- vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
- if (!vid_hdr)
- return -ENOMEM;
-
- mutex_lock(&ubi->move_mutex);
- spin_lock(&ubi->wl_lock);
- ubi_assert(!ubi->move_from && !ubi->move_to);
- ubi_assert(!ubi->move_to_put);
-
- if (!ubi->free.rb_node ||
- (!ubi->used.rb_node && !ubi->scrub.rb_node)) {
- /*
- * No free physical eraseblocks? Well, they must be
waiting in
- * the queue to be erased. Cancel movement - it will be
- * triggered again when a free physical eraseblock
appears.
- *
- * No used physical eraseblocks? They must be
temporarily
- * protected from being moved. They will be moved to the
- * @ubi->used tree later and the wear-leveling will be
- * triggered again.
- */
- dbg_wl("cancel WL, a list is empty: free %d, used %d",
- !ubi->free.rb_node, !ubi->used.rb_node);
- goto out_cancel;
- }
-
- if (!ubi->scrub.rb_node) {
- /*
- * Now pick the least worn-out used physical eraseblock
and a
- * highly worn-out free physical eraseblock. If the
erase
- * counters differ much enough, start wear-leveling.
- */
- e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry,
rb);
- e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-
- if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD)) {
- dbg_wl("no WL needed: min used EC %d, max free
EC %d",
- e1->ec, e2->ec);
- goto out_cancel;
- }
- paranoid_check_in_wl_tree(e1, &ubi->used);
- rb_erase(&e1->rb, &ubi->used);
- dbg_wl("move PEB %d EC %d to PEB %d EC %d",
- e1->pnum, e1->ec, e2->pnum, e2->ec);
- } else {
- /* Perform scrubbing */
- scrubbing = 1;
- e1 = rb_entry(rb_first(&ubi->scrub), struct
ubi_wl_entry, rb);
- e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
- paranoid_check_in_wl_tree(e1, &ubi->scrub);
- rb_erase(&e1->rb, &ubi->scrub);
- dbg_wl("scrub PEB %d to PEB %d", e1->pnum, e2->pnum);
- }
-
- paranoid_check_in_wl_tree(e2, &ubi->free);
- rb_erase(&e2->rb, &ubi->free);
- ubi->move_from = e1;
- ubi->move_to = e2;
- spin_unlock(&ubi->wl_lock);
+ p = root->rb_node;
+ while (p) {
+ struct ubi_wl_entry *e1;
- /*
- * Now we are going to copy physical eraseblock @e1->pnum to
@e2->pnum.
- * We so far do not know which logical eraseblock our physical
- * eraseblock (@e1) belongs to. We have to read the volume
identifier
- * header first.
- *
- * Note, we are protected from this PEB being unmapped and
erased. The
- * 'ubi_wl_put_peb()' would wait for moving to be finished if
the PEB
- * which is being moved was unmapped.
- */
+ e1 = rb_entry(p, struct ubi_wl_entry, rb);
- err = ubi_io_read_vid_hdr(ubi, e1->pnum, vid_hdr, 0);
- if (err && err != UBI_IO_BITFLIPS) {
- if (err == UBI_IO_PEB_FREE) {
- /*
- * We are trying to move PEB without a VID
header. UBI
- * always write VID headers shortly after the
PEB was
- * given, so we have a situation when it did not
have
- * chance to write it down because it was
preempted.
- * Just re-schedule the work, so that next time
it will
- * likely have the VID header in place.
- */
- dbg_wl("PEB %d has no VID header", e1->pnum);
- goto out_not_moved;
+ if (e->pnum == e1->pnum) {
+ ubi_assert(e == e1);
+ return 1;
}
- ubi_err("error %d while reading VID header from PEB %d",
- err, e1->pnum);
- if (err > 0)
- err = -EIO;
- goto out_error;
- }
-
- err = ubi_eba_copy_leb(ubi, e1->pnum, e2->pnum, vid_hdr);
- if (err) {
-
- if (err < 0)
- goto out_error;
- if (err == 1)
- goto out_not_moved;
-
- /*
- * For some reason the LEB was not moved - it might be
because
- * the volume is being deleted. We should prevent this
PEB from
- * being selected for wear-levelling movement for some
"time",
- * so put it to the protection tree.
- */
-
- dbg_wl("cancelled moving PEB %d", e1->pnum);
- pe = kmalloc(sizeof(struct ubi_wl_prot_entry),
GFP_NOFS);
- if (!pe) {
- err = -ENOMEM;
- goto out_error;
+ if (e->ec < e1->ec)
+ p = p->rb_left;
+ else if (e->ec> e1->ec)
+ p = p->rb_right;
+ else {
+ if (e->temp < e1->temp)
+ p = p->rb_left;
+ else if (e->temp > e1->temp)
+ p = p->rb_right;
+ else {
+ /*
+ if (e->pnum < e1->pnum)
+ p = p->rb_left;
+ else
+ p = p->rb_right;
+ */
+ ubi_assert(0);
+
+ }
}
-
- protect = 1;
}
- ubi_free_vid_hdr(ubi, vid_hdr);
- spin_lock(&ubi->wl_lock);
- if (protect)
- prot_tree_add(ubi, e1, pe, protect);
- if (!ubi->move_to_put)
- wl_tree_add(e2, &ubi->used);
- else
- put = 1;
- ubi->move_from = ubi->move_to = NULL;
- ubi->move_to_put = ubi->wl_scheduled = 0;
- spin_unlock(&ubi->wl_lock);
-
- if (put) {
- /*
- * Well, the target PEB was put meanwhile, schedule it
for
- * erasure.
- */
- dbg_wl("PEB %d was put meanwhile, erase", e2->pnum);
- err = schedule_erase(ubi, e2, 0);
- if (err)
- goto out_error;
- }
-
- if (!protect) {
- err = schedule_erase(ubi, e1, 0);
- if (err)
- goto out_error;
- }
-
-
- dbg_wl("done");
- mutex_unlock(&ubi->move_mutex);
- return 0;
-
- /*
- * For some reasons the LEB was not moved, might be an error,
might be
- * something else. @e1 was not changed, so return it back. @e2
might
- * be changed, schedule it for erasure.
- */
-out_not_moved:
- ubi_free_vid_hdr(ubi, vid_hdr);
- spin_lock(&ubi->wl_lock);
- if (scrubbing)
- wl_tree_add(e1, &ubi->scrub);
- else
- wl_tree_add(e1, &ubi->used);
- ubi->move_from = ubi->move_to = NULL;
- ubi->move_to_put = ubi->wl_scheduled = 0;
- spin_unlock(&ubi->wl_lock);
-
- err = schedule_erase(ubi, e2, 0);
- if (err)
- goto out_error;
-
- mutex_unlock(&ubi->move_mutex);
- return 0;
-
-out_error:
- ubi_err("error %d while moving PEB %d to PEB %d",
- err, e1->pnum, e2->pnum);
-
- ubi_free_vid_hdr(ubi, vid_hdr);
- spin_lock(&ubi->wl_lock);
- ubi->move_from = ubi->move_to = NULL;
- ubi->move_to_put = ubi->wl_scheduled = 0;
- spin_unlock(&ubi->wl_lock);
-
- kmem_cache_free(ubi_wl_entry_slab, e1);
- kmem_cache_free(ubi_wl_entry_slab, e2);
- ubi_ro_mode(ubi);
-
- mutex_unlock(&ubi->move_mutex);
- return err;
-
-out_cancel:
- ubi->wl_scheduled = 0;
- spin_unlock(&ubi->wl_lock);
- mutex_unlock(&ubi->move_mutex);
- ubi_free_vid_hdr(ubi, vid_hdr);
return 0;
}
+
/**
- * ensure_wear_leveling - schedule wear-leveling if it is needed.
- * @ubi: UBI device description object
+ * wl_scrub_tree_present - check if scrub entry is present
+ * in the scrub RB-tree.
+ * @e: the wear-leveling entry to check
+ * @root: the root of the tree
*
- * This function checks if it is time to start wear-leveling and
schedules it
- * if yes. This function returns zero in case of success and a negative
error
- * code in case of failure.
+ * This function returns non-zero if @e is in the @root RB-tree and
+ * zero if it is not.
*/
-static int ensure_wear_leveling(struct ubi_device *ubi)
+static int wl_scrub_tree_present(struct ubi_wl_entry *e, struct rb_root
*root)
{
- int err = 0;
- struct ubi_wl_entry *e1;
- struct ubi_wl_entry *e2;
- struct ubi_work *wrk;
-
- spin_lock(&ubi->wl_lock);
- if (ubi->wl_scheduled)
- /* Wear-leveling is already in the work queue */
- goto out_unlock;
+ struct rb_node *p;
- /*
- * If the ubi->scrub tree is not empty, scrubbing is needed, and
the
- * the WL worker has to be scheduled anyway.
- */
- if (!ubi->scrub.rb_node) {
- if (!ubi->used.rb_node || !ubi->free.rb_node)
- /* No physical eraseblocks - no deal */
- goto out_unlock;
+ if (!e)
+ return 0;
- /*
- * We schedule wear-leveling only if the difference
between the
- * lowest erase counter of used physical eraseblocks and
a high
- * erase counter of free physical eraseblocks is greater
then
- * %UBI_WL_THRESHOLD.
- */
- e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry,
rb);
- e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
+ p = root->rb_node;
+ while (p) {
+ struct ubi_wl_entry *e1;
- if (!(e2->ec - e1->ec >= UBI_WL_THRESHOLD))
- goto out_unlock;
- dbg_wl("schedule wear-leveling");
- } else
- dbg_wl("schedule scrubbing");
+ e1 = rb_entry(p, struct ubi_wl_entry, rb);
- ubi->wl_scheduled = 1;
- spin_unlock(&ubi->wl_lock);
+ if (e->pnum == e1->pnum) {
+ ubi_assert(e == e1);
+ return 1;
+ }
- wrk = kmalloc(sizeof(struct ubi_work), GFP_NOFS);
- if (!wrk) {
- err = -ENOMEM;
- goto out_cancel;
+ if (e->pnum < e1->pnum)
+ p = p->rb_left;
+ else
+ p = p->rb_right;
}
- wrk->func = &wear_leveling_worker;
- schedule_ubi_work(ubi, wrk);
- return err;
-
-out_cancel:
- spin_lock(&ubi->wl_lock);
- ubi->wl_scheduled = 0;
-out_unlock:
- spin_unlock(&ubi->wl_lock);
- return err;
+ return 0;
}
+
/**
* erase_worker - physical eraseblock erase worker function.
* @ubi: UBI device description object
* @wl_wrk: the work object
- * @cancel: non-zero if the worker has to free memory and exit
+ * @cancel: %1: do NOTHING but free memory
*
* This function erases a physical eraseblock and perform torture
testing if
* needed. It also takes care about marking the physical eraseblock bad
if
* needed. Returns zero in case of success and a negative error code in
case of
* failure.
*/
-static int erase_worker(struct ubi_device *ubi, struct ubi_work
*wl_wrk,
+static int erase_worker(struct ubi_device *ubi, struct ubi_work
*erase_wrk,
int cancel)
{
- struct ubi_wl_entry *e = wl_wrk->e;
- int pnum = e->pnum, err, need;
-
+ struct ubi_wl_entry *e = erase_wrk->e;
+ int err, need, pnum = e->pnum;
+ int flag = erase_wrk->flag;
+
+ kfree(erase_wrk);
+
+ ubi_assert(!wl_free_tree_present(e, &ubi->free));
+ ubi_assert(!wl_used_tree_present(e, &ubi->used));
+
if (cancel) {
dbg_wl("cancel erasure of PEB %d EC %d", pnum, e->ec);
- kfree(wl_wrk);
kmem_cache_free(ubi_wl_entry_slab, e);
return 0;
}
- dbg_wl("erase PEB %d EC %d", pnum, e->ec);
-
- err = sync_erase(ubi, e, wl_wrk->torture);
+ err = wl_erase_sync(ubi, e, (flag & 0x1));
+
if (!err) {
/* Fine, we've erased it successfully */
- kfree(wl_wrk);
-
spin_lock(&ubi->wl_lock);
- ubi->abs_ec += 1;
- wl_tree_add(e, &ubi->free);
+ wl_add_free_tree(e, &ubi->free);
spin_unlock(&ubi->wl_lock);
-
- /*
- * One more erase operation has happened, take care
about protec
- * physical eraseblocks.
- */
- check_protection_over(ubi);
-
+ dbg_wl("PEB[%u,%u,%llu] has been erased & inserted into
free tre
+ e->pnum, e->ec,
e->temp);
/* And take care about wear-leveling */
- err = ensure_wear_leveling(ubi);
+ if (flag & 0x2)
+ err = wl_schedule_wear_leveling(ubi);
return err;
}
- ubi_err("failed to erase PEB %d, error %d", pnum, err);
- kfree(wl_wrk);
- kmem_cache_free(ubi_wl_entry_slab, e);
+ ubi_err("failed to erase PEB %u, error %d", pnum, err);
- if (err == -EINTR || err == -ENOMEM || err == -EAGAIN ||
- err == -EBUSY) {
+ if (err == -EINTR || err == -ENOMEM ||
+ err == -EAGAIN ||err == -EBUSY) {
int err1;
/* Re-schedule the LEB for erasure */
- err1 = schedule_erase(ubi, e, 0);
+ err1 = wl_schedule_erase(ubi, e, flag);
if (err1) {
err = err1;
goto out_ro;
@@ -1131,225 +965,390 @@ static int erase_worker(struct ubi_device *ubi,
struct
return err;
out_ro:
+ kmem_cache_free(ubi_wl_entry_slab, e);
ubi_ro_mode(ubi);
return err;
}
/**
- * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling
unit.
+ * wear_leveling_worker - wear-leveling worker function.
* @ubi: UBI device description object
- * @pnum: physical eraseblock to return
- * @torture: if this physical eraseblock has to be tortured
+ * @wrk: the work object
+ * @cancel: non-zero if the worker has to free memory and exit
*
- * This function is called to return physical eraseblock @pnum to the
pool of
- * free physical eraseblocks. The @torture flag has to be set if an I/O
error
- * occurred to this @pnum and it has to be tested. This function
returns zero
- * in case of success, and a negative error code in case of failure.
+ * This function is the KEY issure of the WL unit.
+ * o WEAR_LEVELING:
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
*/
-int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture)
+static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work
*wrk,
+ int cancel)
{
- int err;
- struct ubi_wl_entry *e;
-
- dbg_wl("PEB %d", pnum);
- ubi_assert(pnum >= 0);
- ubi_assert(pnum < ubi->peb_count);
+ struct ubi_wl_entry *e_used, *e_free;
+ struct ubi_wl_entry *e_free1;
+ struct ubi_vid_hdr *vid_hdr;
+ int err = 0;
+ int dirty = 0;
+ int scrubbing = 0;
+
+ kfree(wrk);
+
+ vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
+ if (!vid_hdr)
+ return -ENOMEM;
-retry:
+ mutex_lock(&ubi->move_mutex);
spin_lock(&ubi->wl_lock);
- e = ubi->lookuptbl[pnum];
- if (e == ubi->move_from) {
- /*
- * User is putting the physical eraseblock which was
selected to
- * be moved. It will be scheduled for erasure in the
- * wear-leveling worker.
- */
- dbg_wl("PEB %d is being moved, wait", pnum);
- spin_unlock(&ubi->wl_lock);
- /* Wait for the WL worker by taking the @ubi->move_mutex
*/
- mutex_lock(&ubi->move_mutex);
- mutex_unlock(&ubi->move_mutex);
- goto retry;
- } else if (e == ubi->move_to) {
+ if (cancel)
+ goto out_cancel;
+
+ if (ubi->free.rb_node == NULL
+ ||(ubi->used.rb_node == NULL && ubi->scrub.rb_node ==
NULL)) {
/*
- * User is putting the physical eraseblock which was
selected
- * as the target the data is moved to. It may happen if
the EBA
- * unit already re-mapped the LEB in
'ubi_eba_copy_leb()' but
- * the WL unit has not put the PEB to the "used" tree
yet, but
- * it is about to do this. So we just set a flag which
will
- * tell the WL worker that the PEB is not needed anymore
and
- * should be scheduled for erasure.
+ * No free physical eraseblocks? Well, they must be
waiting in
+ * the queue to be erased. Cancel movement - it will be
+ * triggered again when a free physical eraseblock
appears.
+ *
+ * No used physical eraseblocks? They must be
temporarily
+ * protected from being moved. They will be moved to the
+ * @ubi->used tree later and the wear-leveling will be
+ * triggered again.
*/
- dbg_wl("PEB %d is the target of data moving", pnum);
- ubi_assert(!ubi->move_to_put);
- ubi->move_to_put = 1;
- spin_unlock(&ubi->wl_lock);
- return 0;
+
+ dbg_wl("cancel WL, free RB-tree is %s, used RB-tree is %
s.",
+ !ubi->free.rb_node? "empty":"having",
+ !ubi->used.rb_node? "empty":"having");
+ goto out_cancel;
+ }
+
+ if (ubi->scrub.rb_node) {
+ /*scrubbing is needed*/
+ scrubbing = 1;
+
+ e_free = wl_find_free_entry(&ubi->free,
UBI_WL_ENTRY_HALF, 0);
+ ubi_assert(e_free);
+ e_used = rb_entry(ubi->scrub.rb_node, struct
ubi_wl_entry, rb);
+ ubi_assert(e_used);
+ rb_erase(&e_used->rb, &ubi->scrub);
+
} else {
- if (in_wl_tree(e, &ubi->used)) {
- paranoid_check_in_wl_tree(e, &ubi->used);
- rb_erase(&e->rb, &ubi->used);
- } else if (in_wl_tree(e, &ubi->scrub)) {
- paranoid_check_in_wl_tree(e, &ubi->scrub);
- rb_erase(&e->rb, &ubi->scrub);
- } else {
- err = prot_tree_del(ubi, e->pnum);
- if (err) {
- ubi_err("PEB %d not found", pnum);
- ubi_ro_mode(ubi);
- spin_unlock(&ubi->wl_lock);
- return err;
- }
+ /*check wear leveling is needed or not*/
+ e_used = wl_find_used_min_entry(&ubi->used);
+ ubi_assert(e_used);
+ e_free1 = wl_find_free_entry(&ubi->free,
UBI_WL_ENTRY_HALF, 0);
+ ubi_assert(e_free1);
+
+ if ((e_used->ec > (e_free1->ec - UBI_WL_EC_DELTA)) ||
+ e_used->temp > (global_temp -
UBI_WL_TEMP_DELTA)){
+ /* need not to wear leveling. */
+ goto out_cancel;
}
+
+ e_free = wl_find_free_entry(&ubi->free,
UBI_WL_ENTRY_SPEC,
+ e_free1->ec +
UBI_WL_EC_DELTA);
+
+ rb_erase(&e_used->rb, &ubi->used);
}
+
+ e_used->temp = UBI_WL_MOVE_FROME;
+ rb_erase(&e_free->rb, &ubi->free);
+ e_free->temp = UBI_WL_MOVE_TO;
+ /*
+ * Be careful such PEB entry %e_free and %e_used is
+ * IN THE SKY. At this present, if %ubi_wl_put_peb()
+ * is called, what should we do? Look at the
+ * %ubi_wl_put_peb() for more detail.
+ */
spin_unlock(&ubi->wl_lock);
- err = schedule_erase(ubi, e, torture);
+ err = ubi_io_read_vid_hdr(ubi, e_used->pnum, vid_hdr, 0);
+
+ if (err == UBI_IO_PEB_FREE) {
+ /*
+ * We are trying to move PEB without a VID header. UBI
+ * always write VID headers shortly after the PEB was
+ * given, so we have a situation when it did not have
+ * chance to write it down because it was preempted.
+ * Just re-schedule the work, so that next time it will
+ * likely have the VID header in place.
+ */
+ dbg_wl("PEB %d has no VID header", e_used->pnum);
+ goto out_not_moved;
+ } else if (err && err != UBI_IO_BITFLIPS) {
+
+ //ubi_err("error while reading VID header form PEB[%u,%
u,%llu]",
+ printk("error while reading VID header form PEB[%u,%u,%
llu]\n",
+ e_used->pnum, e_used->ec, e_used->temp);
+
+ if (err>0)
+ err = -EIO;
+ goto out_error;
+ }
+
+ err = ubi_eba_copy_leb(ubi, e_used->pnum, e_free->pnum,
vid_hdr);
+ dirty = 1;
+
if (err) {
- spin_lock(&ubi->wl_lock);
- wl_tree_add(e, &ubi->used);
+ /*
+ * For some reason the LEB was not moved - it might be
because
+ * the volume is being deleted. We should prevent this
PEB from
+ * being selected for wear-levelling movement for some
"time",
+ */
+
+ dbg_wl("error %d, cancelled moving PEB %d ec %u temp %
llu",
+ err, e_used->pnum, e_used->ec, e_used->temp);
+
+ goto out_not_moved;
+ }
+
+ ubi_free_vid_hdr(ubi, vid_hdr);
+
+ spin_lock(&ubi->wl_lock);
+ wl_add_used_tree(e_free, &ubi->used);
+ ubi->wl_scheduled = 0;
+ dbg_wl("%s form PEB[%u,%u,%llu] to PEB[%u,%u,%llu] [ OK ]",
+ (scrubbing? "SCRUBBING" : "WEAR
LEVELING"),
+ e_used->pnum, e_used->ec, e_used->temp,
+ e_free->pnum, e_free->ec, e_free->temp);
+ e_used->temp = UBI_WL_PUT;
+ spin_unlock(&ubi->wl_lock);
+
+ if (scrubbing)
+ err = wl_schedule_erase(ubi, e_used, 0x0);
+ else
+ err = wl_schedule_erase(ubi, e_used, 0x2);
+
+ if (err)
+ goto out_error;
+ mutex_unlock(&ubi->move_mutex);
+ return 0;
+
+ /*
+ * For some reasons the LEB was not moved, might be an error,
+ * might be something else. @e1 was not changed, so return it
+ * back. @e2 might be changed, schedule it for erasure.
+ */
+out_not_moved:
+ ubi_free_vid_hdr(ubi, vid_hdr);
+ spin_lock(&ubi->wl_lock);
+ ubi->wl_scheduled = 0;
+
+ if (scrubbing)
+ wl_add_scrub_tree(e_used, &ubi->scrub);
+ else
+ wl_add_used_tree(e_used, &ubi->used);
+
+ if (!dirty) {
+ /*
+ * date has not been copied to the PEB entry %e_free
yet.
+ * insert it back into the free RB-tree.
+ */
+ wl_add_free_tree(e_free, &ubi->free);
+ err = 0;
+ } else {
+ /*
+ * Maybe some date has been copied to PEB entry %
e_free.
+ * schedule a erase worker to erase this PEB.
+ */
+ e_free->temp = UBI_WL_PUT;
spin_unlock(&ubi->wl_lock);
+ err = wl_schedule_erase(ubi, e_free, 0x2);
+ spin_lock(&ubi->wl_lock);
}
+ spin_unlock(&ubi->wl_lock);
+
+ if (err)
+ goto out_error;
+
+ mutex_unlock(&ubi->move_mutex);
+ return 0;
+
+out_error:
+ ubi_err("error %d while moving PEB %d to PEB %d",
+ err, e_used->pnum, e_free->pnum);
+
+ ubi_free_vid_hdr(ubi, vid_hdr);
+
+ kmem_cache_free(ubi_wl_entry_slab, e_used);
+ kmem_cache_free(ubi_wl_entry_slab, e_free);
+ ubi_ro_mode(ubi);
+
+ mutex_unlock(&ubi->move_mutex);
+ return err;
+out_cancel:
+ ubi->wl_scheduled = 0;
+ spin_unlock(&ubi->wl_lock);
+ mutex_unlock(&ubi->move_mutex);
return err;
}
+
/**
- * ubi_wl_scrub_peb - schedule a physical eraseblock for scrubbing.
+ * ubi_wl_put_peb - return a physical eraseblock to the wear-leveling
unit.
* @ubi: UBI device description object
- * @pnum: the physical eraseblock to schedule
+ * @pnum: physical eraseblock to return
+ * @torture: if this physical eraseblock has to be tortured
*
- * If a bit-flip in a physical eraseblock is detected, this physical
eraseblock
- * needs scrubbing. This function schedules a physical eraseblock for
- * scrubbing which is done in background. This function returns zero in
case of
- * success and a negative error code in case of failure.
+ * This function is called to return physical eraseblock @pnum to
+ * the pool of free physical eraseblocks. The @torture flag has to
+ * be set if an I/O error occurred to this @pnum and it has to be
tested.
+ * This function returns zero in case of success, and a negative error
+ * code in case of failure.
*/
-int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum)
+int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture)
{
+ int err = 0;
struct ubi_wl_entry *e;
- ubi_msg("schedule PEB %d for scrubbing", pnum);
+ ubi_assert(pnum >= 0);
+ ubi_assert(pnum < ubi->peb_count);
-retry:
+retry:
spin_lock(&ubi->wl_lock);
e = ubi->lookuptbl[pnum];
- if (e == ubi->move_from || in_wl_tree(e, &ubi->scrub)) {
+ ubi_assert(e);
+
+ if (e->temp >= UBI_WL_USED_INIT) {
+ int err1 = wl_used_tree_present(e, &ubi->used);
+ if (!err1) {
+ ubi_err("Put PEB[%u,%u,%llu] with is not in the
used RB-
+ e->pnum, e->ec,
e->temp);
+ ubi_assert(0);
+ }
+
+ rb_erase(&e->rb, &ubi->used);
+ e->temp = UBI_WL_PUT;
spin_unlock(&ubi->wl_lock);
- return 0;
- }
+ err = wl_schedule_erase(ubi, e, torture | 0x2);
+ return err;
- if (e == ubi->move_to) {
+ } else if (e->temp == UBI_WL_SCRUB) {
+ int err1 = wl_scrub_tree_present(e, &ubi->scrub);
+ if (!err1) {
+ ubi_err("Put PEB[%u,%u,%llu] with is not in the
scrub RB
+ e->pnum, e->ec,
e->temp);
+ ubi_assert(0);
+ }
+
+ rb_erase(&e->rb, &ubi->scrub);
+ e->temp = UBI_WL_PUT;
+ spin_unlock(&ubi->wl_lock);
+
+ /*
+ * When to scrub a PEB, wear-leveling worker will not
be
+ * scheduled specially
+ */
+ err = wl_schedule_erase(ubi, e, torture);
+ return err;
+ } else if(e->temp == UBI_WL_MOVE_FROME
+ ||e->temp == UBI_WL_MOVE_TO) {
/*
- * This physical eraseblock was used to move data to.
The data
- * was moved but the PEB was not yet inserted to the
proper
- * tree. We should just wait a little and let the WL
worker
- * proceed.
+ * When to PUT peb in the sky (whoes status is FROM or
TO)
+ * such peb must be in the wear-leveling (or scrubbing)
process
+ * the peb will be PUT or insert back to USED/SCRUB
RB-tree
+ * soon. So, nothing we should do but wait now.
*/
+
spin_unlock(&ubi->wl_lock);
- dbg_wl("the PEB %d is not in proper tree, retry", pnum);
- yield();
+ mutex_lock(&ubi->move_mutex);
+ mutex_unlock(&ubi->move_mutex);
goto retry;
- }
+ } else if (e->temp == UBI_WL_PUT) {
+ /*
+ * Only after wait for the MOVE_TO peb being insert
into
+ * the PUT workqueue due to wear-leveling error, can
this
+ * situation be happened. I still do a erasure although
+ * maybe not have to do. what a active boy. :-)
+ */
+ spin_unlock(&ubi->wl_lock);
+ err = wl_do_work(ubi);
+ /*if %err is equal to 1, no peb in the workqueue */
+ err = (err == 1)? 0 : err;
+ return err;
+ } else if (e->temp == UBI_WL_DIRTY) {
+ /*
+ * In case of the PEB had be scheduled to erase, but
fail
+ * to alloc @ubi_work stucture in @wl_schedule_erase
+ * function, such PEB entry is in the sky, Thanks to
this
+ * PUT function for REput it called by UBI client.
+ */
+ e->temp = UBI_WL_PUT;
+ spin_unlock(&ubi->wl_lock);
+ err = wl_schedule_erase(ubi, e, torture|0x2);
+ return err;
- if (in_wl_tree(e, &ubi->used)) {
- paranoid_check_in_wl_tree(e, &ubi->used);
- rb_erase(&e->rb, &ubi->used);
} else {
- int err;
-
- err = prot_tree_del(ubi, e->pnum);
- if (err) {
- ubi_err("PEB %d not found", pnum);
- ubi_ro_mode(ubi);
- spin_unlock(&ubi->wl_lock);
- return err;
- }
+ /*
+ * What happened? the other possible statuses are
+ * %FREE, but PEB entry whith such status has not
+ * mapped to LEB, There is no choice to PUT these PEBs
+ */
+ ubi_err("Put PEB[%u,%u,%llu] is error",
+ e->pnum, e->ec, e->temp);
+ ubi_assert(0);
}
-
- wl_tree_add(e, &ubi->scrub);
- spin_unlock(&ubi->wl_lock);
-
- /*
- * Technically scrubbing is the same as wear-leveling, so it is
done
- * by the WL worker.
- */
- return ensure_wear_leveling(ubi);
}
+
/**
- * ubi_wl_flush - flush all pending works.
+ * ubi_wl_scrub_peb - schedule a physical eraseblock for scrubbing.
* @ubi: UBI device description object
+ * @pnum: the physical eraseblock to schedule
*
- * This function returns zero in case of success and a negative error
code in
- * case of failure.
+ * If a bit-flip in a physical eraseblock is detected, this physical
+ * eraseblock needs scrubbing. This function get the @pnum PEB form
+ * used RB-tree and make its %temp = 0, then put it back to used
RB-tree.
+ * This function returns zero in case of success and a negative error
+ * code in case of failure.
*/
-int ubi_wl_flush(struct ubi_device *ubi)
+int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum)
{
- int err;
-
- /*
- * Erase while the pending works queue is not empty, but not
more then
- * the number of currently pending works.
- */
- dbg_wl("flush (%d pending works)", ubi->works_count);
- while (ubi->works_count) {
- err = do_work(ubi);
- if (err)
- return err;
- }
+ int err = 0;
+ struct ubi_wl_entry *e;
+ ubi_msg("schedule PEB %d for scrubbing", pnum);
- /*
- * Make sure all the works which have been done in parallel are
- * finished.
- */
- down_write(&ubi->work_sem);
- up_write(&ubi->work_sem);
+retry:
+ spin_lock(&ubi->wl_lock);
+ e = ubi->lookuptbl[pnum];
+ ubi_assert(e);
/*
- * And in case last was the WL worker and it cancelled the LEB
- * movement, flush again.
+ * do the scrubbing in a similar way to @ubi_wl_put_peb
*/
- while (ubi->works_count) {
- dbg_wl("flush more (%d pending works)",
ubi->works_count);
- err = do_work(ubi);
- if (err)
- return err;
+ if (e->temp >= UBI_WL_USED_INIT) {
+ ubi_assert(wl_used_tree_present(e, &ubi->used));
+ rb_erase(&e->rb, &ubi->used);
+ wl_add_scrub_tree(e, &ubi->scrub);
+ spin_unlock(&ubi->wl_lock);
+
+ err = wl_schedule_wear_leveling(ubi);
+ return err;
+
+ } else if (e->temp == UBI_WL_SCRUB) {
+ ubi_assert(wl_scrub_tree_present(e, &ubi->scrub));
+ spin_unlock(&ubi->wl_lock);
+ err = wl_schedule_wear_leveling(ubi);
+ return err;
+
+ } else if (e->temp == UBI_WL_MOVE_FROME
+ || e->temp == UBI_WL_MOVE_TO) {
+ spin_unlock(&ubi->wl_lock);
+ mutex_lock(&ubi->move_mutex);
+ mutex_unlock(&ubi->move_mutex);
+ goto retry;
+ } else if (e->temp == UBI_WL_PUT) {
+ spin_unlock(&ubi->wl_lock);
+ return 0;
+
+ } else {
+ spin_unlock(&ubi->wl_lock);
+ ubi_assert(0);
}
- return 0;
}
-/**
- * tree_destroy - destroy an RB-tree.
- * @root: the root of the tree to destroy
- */
-static void tree_destroy(struct rb_root *root)
-{
- struct rb_node *rb;
- struct ubi_wl_entry *e;
-
- rb = root->rb_node;
- while (rb) {
- if (rb->rb_left)
- rb = rb->rb_left;
- else if (rb->rb_right)
- rb = rb->rb_right;
- else {
- e = rb_entry(rb, struct ubi_wl_entry, rb);
-
- rb = rb_parent(rb);
- if (rb) {
- if (rb->rb_left == &e->rb)
- rb->rb_left = NULL;
- else
- rb->rb_right = NULL;
- }
-
- kmem_cache_free(ubi_wl_entry_slab, e);
- }
- }
-}
/**
* ubi_thread - UBI background thread.
@@ -1383,14 +1382,14 @@ int ubi_thread(void *u)
}
spin_unlock(&ubi->wl_lock);
- err = do_work(ubi);
- if (err) {
+ err = wl_do_work(ubi);
+ if (err < 0) {
ubi_err("%s: work failed with error code %d",
ubi->bgt_name, err);
- if (failures++ > WL_MAX_FAILURES) {
+ if (++failures > WL_MAX_FAILURES) {
/*
- * Too many failures, disable the thread
and
- * switch to read-only mode.
+ * Too many failures, disable the
thread
+ * and switch to read-only mode.
*/
ubi_msg("%s: %d consecutive failures",
ubi->bgt_name, WL_MAX_FAILURES);
@@ -1407,6 +1406,47 @@ int ubi_thread(void *u)
return 0;
}
+
+/**
+ * ubi_wl_flush - flush all pending works.
+ * @ubi: UBI device description object
+ *
+ * This function returns zero in case of success and
+ * a negative error code in case of failure.
+ */
+int ubi_wl_flush(struct ubi_device *ubi)
+{
+ int err, repeat = 0;
+
+ /*
+ * Erase while the pending works queue is not empty,
+ * but not more then the number of currently pending works.
+ */
+ dbg_wl("flush pending works");
+ do {
+ err = wl_do_work(ubi);
+
+ if (err < 0)
+ return err;
+ if (err == 1) {
+ /*
+ * the work queue is empty at the moment.
+ * Make sure all the works which have been done
+ * in parallel are finished.
+ */
+ down_write(&ubi->work_sem);
+ up_write(&ubi->work_sem);
+ /*
+ * And in case last was the WL worker and it
+ * cancelled the LEB movement, flush a second
time.
+ */
+ repeat++;
+ }
+ } while (!err || (repeat < 2));
+
+ return 0;
+}
+
/**
* cancel_pending - cancel all pending works.
* @ubi: UBI device description object
@@ -1414,13 +1454,42 @@ int ubi_thread(void *u)
static void cancel_pending(struct ubi_device *ubi)
{
while (!list_empty(&ubi->works)) {
- struct ubi_work *wrk;
+ struct ubi_work *work;
+
+ work = list_entry(ubi->works.next, struct ubi_work,
list);
+ list_del(&work->list);
+ work->func(ubi, work, 1);
+ }
+}
+
+/**
+ * tree_destroy - destroy an RB-tree.
+ * @root: the root of the tree to destroy
+ */
+static void tree_destroy(struct rb_root *root)
+{
+ struct rb_node *rb;
+ struct ubi_wl_entry *e;
+
+ rb = root->rb_node;
+ while (rb) {
+ if (rb->rb_left)
+ rb = rb->rb_left;
+ else if (rb->rb_right)
+ rb = rb->rb_right;
+ else {
+ e = rb_entry(rb, struct ubi_wl_entry, rb);
+
+ rb = rb_parent(rb);
+ if (rb) {
+ if (rb->rb_left == &e->rb)
+ rb->rb_left = NULL;
+ else
+ rb->rb_right = NULL;
+ }
- wrk = list_entry(ubi->works.next, struct ubi_work,
list);
- list_del(&wrk->list);
- wrk->func(ubi, wrk, 1);
- ubi->works_count -= 1;
- ubi_assert(ubi->works_count >= 0);
+ kmem_cache_free(ubi_wl_entry_slab, e);
+ }
}
}
@@ -1430,32 +1499,32 @@ static void cancel_pending(struct ubi_device
*ubi)
* @ubi: UBI device description object
* @si: scanning information
*
- * This function returns zero in case of success, and a negative error
code in
- * case of failure.
+ * This function returns zero in case of success,
+ * and a negative error code in case of failure.
*/
int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
{
- int err;
+ int err = 0;
struct rb_node *rb1, *rb2;
struct ubi_scan_volume *sv;
struct ubi_scan_leb *seb, *tmp;
struct ubi_wl_entry *e;
+ ubi->max_ec = si->max_ec;
ubi->used = ubi->free = ubi->scrub = RB_ROOT;
- ubi->prot.pnum = ubi->prot.aec = RB_ROOT;
spin_lock_init(&ubi->wl_lock);
+ INIT_LIST_HEAD(&ubi->works);
mutex_init(&ubi->move_mutex);
+ ubi->wl_scheduled = 0;
init_rwsem(&ubi->work_sem);
- ubi->max_ec = si->max_ec;
- INIT_LIST_HEAD(&ubi->works);
-
+ global_temp = UBI_WL_USED_INIT;
+
sprintf(ubi->bgt_name, UBI_BGT_NAME_PATTERN, ubi->ubi_num);
- err = -ENOMEM;
ubi->lookuptbl = kzalloc(ubi->peb_count * sizeof(void *),
GFP_KERNEL);
if (!ubi->lookuptbl)
- return err;
+ return -ENOMEM;
list_for_each_entry_safe(seb, tmp, &si->erase, u.list) {
cond_resched();
@@ -1467,7 +1536,8 @@ int ubi_wl_init_scan(struct ubi_device *ubi,
struct ubi_sc
e->pnum = seb->pnum;
e->ec = seb->ec;
ubi->lookuptbl[e->pnum] = e;
- if (schedule_erase(ubi, e, 0)) {
+ e->temp = UBI_WL_PUT;
+ if (wl_schedule_erase(ubi, e, 0x0)) {
kmem_cache_free(ubi_wl_entry_slab, e);
goto out_free;
}
@@ -1483,7 +1553,7 @@ int ubi_wl_init_scan(struct ubi_device *ubi,
struct ubi_sc
e->pnum = seb->pnum;
e->ec = seb->ec;
ubi_assert(e->ec >= 0);
- wl_tree_add(e, &ubi->free);
+ wl_add_free_tree(e, &ubi->free);
ubi->lookuptbl[e->pnum] = e;
}
@@ -1496,8 +1566,9 @@ int ubi_wl_init_scan(struct ubi_device *ubi,
struct ubi_sc
e->pnum = seb->pnum;
e->ec = seb->ec;
+ e->temp = UBI_WL_PUT;
ubi->lookuptbl[e->pnum] = e;
- if (schedule_erase(ubi, e, 0)) {
+ if (wl_schedule_erase(ubi, e, 0x0)) {
kmem_cache_free(ubi_wl_entry_slab, e);
goto out_free;
}
@@ -1515,13 +1586,14 @@ int ubi_wl_init_scan(struct ubi_device *ubi,
struct ubi_
e->ec = seb->ec;
ubi->lookuptbl[e->pnum] = e;
if (!seb->scrub) {
- dbg_wl("add PEB %d EC %d to the used
tree",
- e->pnum, e->ec);
- wl_tree_add(e, &ubi->used);
+ dbg_wl("add PEB %d ec %u temp %llu to
the used t
+ e->pnum, e->ec,
e->temp);
+ wl_add_used_tree(e, &ubi->used);
} else {
- dbg_wl("add PEB %d EC %d to the scrub
tree",
- e->pnum, e->ec);
- wl_tree_add(e, &ubi->scrub);
+ dbg_wl("PEB %d ec %u temp %llu need to
scrub",
+ e->pnum, e->ec, e->temp);
+ e->temp = UBI_WL_SCRUB;
+ wl_add_scrub_tree(e, &ubi->scrub);
}
}
}
@@ -1534,53 +1606,16 @@ int ubi_wl_init_scan(struct ubi_device *ubi,
struct ubi_
ubi->avail_pebs -= WL_RESERVED_PEBS;
ubi->rsvd_pebs += WL_RESERVED_PEBS;
- /* Schedule wear-leveling if needed */
- err = ensure_wear_leveling(ubi);
- if (err)
- goto out_free;
-
return 0;
out_free:
cancel_pending(ubi);
tree_destroy(&ubi->used);
tree_destroy(&ubi->free);
- tree_destroy(&ubi->scrub);
kfree(ubi->lookuptbl);
return err;
}
-/**
- * protection_trees_destroy - destroy the protection RB-trees.
- * @ubi: UBI device description object
- */
-static void protection_trees_destroy(struct ubi_device *ubi)
-{
- struct rb_node *rb;
- struct ubi_wl_prot_entry *pe;
-
- rb = ubi->prot.aec.rb_node;
- while (rb) {
- if (rb->rb_left)
- rb = rb->rb_left;
- else if (rb->rb_right)
- rb = rb->rb_right;
- else {
- pe = rb_entry(rb, struct ubi_wl_prot_entry,
rb_aec);
-
- rb = rb_parent(rb);
- if (rb) {
- if (rb->rb_left == &pe->rb_aec)
- rb->rb_left = NULL;
- else
- rb->rb_right = NULL;
- }
-
- kmem_cache_free(ubi_wl_entry_slab, pe->e);
- kfree(pe);
- }
- }
-}
/**
* ubi_wl_close - close the wear-leveling unit.
@@ -1589,78 +1624,9 @@ static void protection_trees_destroy(struct
ubi_device *u
void ubi_wl_close(struct ubi_device *ubi)
{
dbg_wl("close the UBI wear-leveling unit");
-
cancel_pending(ubi);
- protection_trees_destroy(ubi);
tree_destroy(&ubi->used);
- tree_destroy(&ubi->free);
- tree_destroy(&ubi->scrub);
+ tree_destroy(&ubi->free);;
kfree(ubi->lookuptbl);
}
-#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
-
-/**
- * paranoid_check_ec - make sure that the erase counter of a physical
erasebloc
- * is correct.
- * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to check
- * @ec: the erase counter to check
- *
- * This function returns zero if the erase counter of physical
eraseblock @pnum
- * is equivalent to @ec, %1 if not, and a negative error code if an
error
- * occurred.
- */
-static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec)
-{
- int err;
- long long read_ec;
- struct ubi_ec_hdr *ec_hdr;
-
- ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS);
- if (!ec_hdr)
- return -ENOMEM;
-
- err = ubi_io_read_ec_hdr(ubi, pnum, ec_hdr, 0);
- if (err && err != UBI_IO_BITFLIPS) {
- /* The header does not have to exist */
- err = 0;
- goto out_free;
- }
-
- read_ec = be64_to_cpu(ec_hdr->ec);
- if (ec != read_ec) {
- ubi_err("paranoid check failed for PEB %d", pnum);
- ubi_err("read EC is %lld, should be %d", read_ec, ec);
- ubi_dbg_dump_stack();
- err = 1;
- } else
- err = 0;
-
-out_free:
- kfree(ec_hdr);
- return err;
-}
-
-/**
- * paranoid_check_in_wl_tree - make sure that a wear-leveling entry is
present
- * in a WL RB-tree.
- * @e: the wear-leveling entry to check
- * @root: the root of the tree
- *
- * This function returns zero if @e is in the @root RB-tree and %1 if
it
- * is not.
- */
-static int paranoid_check_in_wl_tree(struct ubi_wl_entry *e,
- struct rb_root *root)
-{
- if (in_wl_tree(e, root))
- return 0;
-
- ubi_err("paranoid check failed for PEB %d, EC %d, RB-tree %p ",
- e->pnum, e->ec, root);
- ubi_dbg_dump_stack();
- return 1;
-}
-
-#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
--
Yours sincerely
xiaochuan-xu(cqu.edu.cn)
^ permalink raw reply related [flat|nested] 3+ messages in thread