Re: Nand Flash not found.

[William J Beksi <wjbeksi@setabox.com>]

Hi Marcus,

Marcus Mikolaiczyk wrote:
> Dear list users,
> 
> I've adapted a hardware driver for our board, and compiled the new
> kernel successfully. But it doesn't find the NAND Flash. When loading
> the module I get:
> insmod ./btutc1130.o
> ./btutc1130.o: init_module: No such device or address
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
> 
> in /var/log/messages:
> Jan  1 19:25:15 10 daemon.warn klogd: No NAND device found!!!
> 
> Is there any possibility to test the 'connection' to the NAND or how can
> I check/debug the problem. I think that the HW functions are not
> properly configured, any idea how this can be checked.

I often have this problem if I don't have a good physical connection 
between the flash device and it's socket, so recheck your connection. 
Can you post your hardware function?

-- 
William J Beksi                          <wjbeksi@users.sourceforge.net>
GPG Key Fingerprint = ED4B 32C3 69E6 C2B7 705C  263F CB2F 3253 E7E1 DB3B