From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from www2.levante.de ([212.101.151.130] helo=www.levante.de) by canuck.infradead.org with esmtp (Exim 4.43 #1 (Red Hat Linux)) id 1Dd8an-0006H7-Pf for linux-mtd@lists.infradead.org; Tue, 31 May 2005 11:23:49 -0400 Message-ID: <429C8192.30004@fsforth.de> Date: Tue, 31 May 2005 17:24:02 +0200 From: Jonas Dietsche MIME-Version: 1.0 To: blair@circumnavnetworks.com References: <429AEC25.4000309@fsforth.de> <1117478995.24559.12.camel@blairs-desktop> In-Reply-To: <1117478995.24559.12.camel@blairs-desktop> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: linux-mtd@lists.infradead.org Subject: Re: nand write problem List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi Blair, thanks for your help! >># ./nandwrite --jffs2 /dev/mtd/2 jffs2.img >>Use -f option to enforce legacy placement on autoplacement enabled mtd >>device > > What version of nandwrite (nandwrite -V) do you have? Version 1.30 > supports -f. > >># ./nandwrite -f /dev/mtd/2 jffs2.img >>./nandwrite: illegal option -- f >> >># ./nandwrite -f --jffs2 /dev/mtd/2 jffs2.img >>./nandwrite: illegal option -- f >> >># ./nandwrite -p /dev/mtd/2 jffs2.img >>this takes a long time until it is finished. > > If your JFFS2 image has any size to it, I would expect it to take some > time. > >>then I mount it with >># mount -t jffs2 /dev/mtdblock/2 /mnt/ >>and get a lot of >>CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0 >> >>Copy the image with nandwrite is the correct and only way? Or is there >>another possibility? > > I've seen the CLEANMARKER errors before. How did you create the JFFS2 > partition? > > Check out this thread for a little more detail: > http://lists.infradead.org/pipermail/linux-mtd/2005-March/012045.html > > Good luck! > > -blair > -- Jonas Dietsche, FS Forth-Systeme GmbH, www.fsforth.de Kueferstrasse 8, 79206 Breisach, Germany Phone: +49 (7667) 908 189, FAX +49 (7667) 908 200