From: "Artem B. Bityutskiy" <dedekind@yandex.ru>
To: Andy Hawkins <a.hawkins@cabletime.com>
Cc: linux-mtd@lists.infradead.org, support@mvista.com,
linuxppc-embedded@ozlabs.org
Subject: Re: Slow read performance of NAND flash on PPC 405EP
Date: Wed, 21 Sep 2005 21:00:02 +0400 [thread overview]
Message-ID: <43319192.70406@yandex.ru> (raw)
In-Reply-To: <003401c5becc$6795bf00$153335bf@cabletime.com>
Andy Hawkins wrote:
> Hi,
>
> We have a custom PPC-405EP based board, with a Samsumg 8Gbit flash
> (K9W8G08U1M) attached via EBC bank 2. When we read from this flash, we are
> only getting data rates of around 20 MBits/sec (this is using 'dd' to read
> direct from the linux /dev/mtd/x device). Our estimates show that the device
> should be capable of something like 100 MBits/sec.
>
Ops, pardon, you are not going to use JFFS2 :-) Ignore that mail then :-)
--
Best Regards,
Artem B. Bityuckiy,
St.-Petersburg, Russia.
prev parent reply other threads:[~2005-09-21 17:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-21 16:49 Slow read performance of NAND flash on PPC 405EP Andy Hawkins
2005-09-21 16:58 ` Artem B. Bityutskiy
2005-09-21 17:00 ` Artem B. Bityutskiy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43319192.70406@yandex.ru \
--to=dedekind@yandex.ru \
--cc=a.hawkins@cabletime.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linuxppc-embedded@ozlabs.org \
--cc=support@mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox