From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: Chuanhong Guo <gch981213@gmail.com>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: Re: [PATCH v3] mtd: spinand: add support for GigaDevice GD5FxGQ4xA
Date: Wed, 28 Nov 2018 12:42:18 +0000 [thread overview]
Message-ID: <43cf1905-e44b-269b-8623-d51fd39e5981@kontron.de> (raw)
In-Reply-To: <20181128112041.22387-1-gch981213@gmail.com>
Hi Chuanhong,
On 28.11.18 12:20, Chuanhong Guo wrote:
> Add support for GigaDevice GD5F1G/2G/4GQ4xA SPI NAND.
>
> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
> ---
>
> I'm really sorry for sending broken patch twice.
>
> Change since v2:
> fixed incorrect ECC status values
>
> Changes since v1:
> fixed broken indent at the beginning
> fixed OOB layout. Only the first byte is reserved for bad block mark
> replaced STATUS_ECC_HAS_BITFLIPS with a device-specific definition
>
> drivers/mtd/nand/spi/Makefile | 2 +-
> drivers/mtd/nand/spi/core.c | 1 +
> drivers/mtd/nand/spi/gigadevice.c | 148 ++++++++++++++++++++++++++++++
> include/linux/mtd/spinand.h | 1 +
> 4 files changed, 151 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mtd/nand/spi/gigadevice.c
>
> diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
> index be5f73512ece..753125082640 100644
> --- a/drivers/mtd/nand/spi/Makefile
> +++ b/drivers/mtd/nand/spi/Makefile
> @@ -1,3 +1,3 @@
> # SPDX-License-Identifier: GPL-2.0
> -spinand-objs := core.o macronix.o micron.o toshiba.o winbond.o
> +spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o
> obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 87bdf2a7b724..479c2f2cf17f 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -764,6 +764,7 @@ static const struct nand_ops spinand_ops = {
> };
>
> static const struct spinand_manufacturer *spinand_manufacturers[] = {
> + &gigadevice_spinand_manufacturer,
> ¯onix_spinand_manufacturer,
> µn_spinand_manufacturer,
> &toshiba_spinand_manufacturer,
> diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
> new file mode 100644
> index 000000000000..20f26cdc598f
> --- /dev/null
> +++ b/drivers/mtd/nand/spi/gigadevice.c
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Author:
> + * Chuanhong Guo <gch981213@gmail.com>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/mtd/spinand.h>
> +
> +#define SPINAND_MFR_GIGADEVICE 0xC8
> +#define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4)
> +#define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4)
> +
> +static SPINAND_OP_VARIANTS(read_cache_variants,
> + SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
> + SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
> +
> +static SPINAND_OP_VARIANTS(write_cache_variants,
> + SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
> + SPINAND_PROG_LOAD(true, 0, NULL, 0));
> +
> +static SPINAND_OP_VARIANTS(update_cache_variants,
> + SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
> + SPINAND_PROG_LOAD(false, 0, NULL, 0));
> +
> +static int gd5fxgq4xa_ooblayout_ecc(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *region)
> +{
> + if (section > 3)
> + return -ERANGE;
> +
> + region->offset = (16 * section) + 8;
> + region->length = 8;
> +
> + return 0;
> +}
> +
> +static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *region)
> +{
> + if (section > 3)
> + return -ERANGE;
> +
> + if(section) {
There's a space missing after the 'if'.
> + region->offset = 16 * section;
> + region->length = 8;
> + } else {
> + /* section 0 has one byte reserved for bad block mark */
> + region->offset = (16 * section) + 1;
Just use region->offset = 1 here.
I didn't check the datasheet, though the rest of the patch looks good to me.
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Regards,
Frieder
> + region->length = 7;
> + }
> + return 0;
> +}
> +
> +static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
> + u8 status)
> +{
> + switch (status & STATUS_ECC_MASK) {
> + case STATUS_ECC_NO_BITFLIPS:
> + return 0;
> +
> + case GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS:
> + /* 1-7 bits are flipped. return the maximum. */
> + return 7;
> +
> + case GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS:
> + return 8;
> +
> + case STATUS_ECC_UNCOR_ERROR:
> + return -EBADMSG;
> +
> + default:
> + break;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
> + .ecc = gd5fxgq4xa_ooblayout_ecc,
> + .free = gd5fxgq4xa_ooblayout_free,
> +};
> +
> +static const struct spinand_info gigadevice_spinand_table[] = {
> + SPINAND_INFO("GD5F1GQ4xA", 0xF1,
> + NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
> + gd5fxgq4xa_ecc_get_status)),
> + SPINAND_INFO("GD5F2GQ4xA", 0xF2,
> + NAND_MEMORG(1, 2048, 64, 64, 2048, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
> + gd5fxgq4xa_ecc_get_status)),
> + SPINAND_INFO("GD5F4GQ4xA", 0xF4,
> + NAND_MEMORG(1, 2048, 64, 64, 4096, 1, 1, 1),
> + NAND_ECCREQ(8, 512),
> + SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> + &write_cache_variants,
> + &update_cache_variants),
> + 0,
> + SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
> + gd5fxgq4xa_ecc_get_status)),
> +};
> +
> +static int gigadevice_spinand_detect(struct spinand_device *spinand)
> +{
> + u8 *id = spinand->id.data;
> + int ret;
> +
> + /*
> + * For GD NANDs, There is an address byte needed to shift in before IDs
> + * are read out, so the first byte in raw_id is dummy.
> + */
> + if (id[1] != SPINAND_MFR_GIGADEVICE)
> + return 0;
> +
> + ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
> + ARRAY_SIZE(gigadevice_spinand_table),
> + id[2]);
> + if (ret)
> + return ret;
> +
> + return 1;
> +}
> +
> +static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
> + .detect = gigadevice_spinand_detect,
> +};
> +
> +const struct spinand_manufacturer gigadevice_spinand_manufacturer = {
> + .id = SPINAND_MFR_GIGADEVICE,
> + .name = "GigaDevice",
> + .ops = &gigadevice_spinand_manuf_ops,
> +};
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index 816c4b00abca..b92e2aa955b6 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -194,6 +194,7 @@ struct spinand_manufacturer {
> };
>
> /* SPI NAND manufacturers */
> +extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
> extern const struct spinand_manufacturer macronix_spinand_manufacturer;
> extern const struct spinand_manufacturer micron_spinand_manufacturer;
> extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
>
prev parent reply other threads:[~2018-11-28 12:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-28 11:20 [PATCH v3] mtd: spinand: add support for GigaDevice GD5FxGQ4xA Chuanhong Guo
2018-11-28 12:42 ` Schrempf Frieder [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43cf1905-e44b-269b-8623-d51fd39e5981@kontron.de \
--to=frieder.schrempf@kontron.de \
--cc=boris.brezillon@bootlin.com \
--cc=gch981213@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox