* NAND + partitions
@ 2006-03-10 13:25 Selmeci, Tamas
2006-03-10 13:35 ` Michael Trimarchi
0 siblings, 1 reply; 2+ messages in thread
From: Selmeci, Tamas @ 2006-03-10 13:25 UTC (permalink / raw)
To: linux-mtd
Hi!
Is it possible to create partitions on a NAND flash card? And if that card is a SmartMedia Card?
I'd need to following layout:
partition0: boot loader 128 KB
partition1: linux kernel boot params 64 KB
partition2: linux kernel
partition3: root filesystem (now it's cramfs but I'd like to change to JFFS2) 50 MB
Bye
--
Tamas Selmeci
Siemens PSE HU
Tel. : +36-1-471-3861
Email : tamas.selmeci@siemens.com
Address: H-1143 Budapest, Gizella ut 51-59
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: NAND + partitions
2006-03-10 13:25 NAND + partitions Selmeci, Tamas
@ 2006-03-10 13:35 ` Michael Trimarchi
0 siblings, 0 replies; 2+ messages in thread
From: Michael Trimarchi @ 2006-03-10 13:35 UTC (permalink / raw)
To: Selmeci, Tamas; +Cc: linux-mtd
Selmeci, Tamas wrote:
>Hi!
>
>Is it possible to create partitions on a NAND flash card? And if that card is a SmartMedia Card?
>
>I'd need to following layout:
>partition0: boot loader 128 KB
>partition1: linux kernel boot params 64 KB
>partition2: linux kernel
>partition3: root filesystem (now it's cramfs but I'd like to change to JFFS2) 50 MB
>
>Bye
>--
>Tamas Selmeci
>Siemens PSE HU
>Tel. : +36-1-471-3861
>Email : tamas.selmeci@siemens.com
>Address: H-1143 Budapest, Gizella ut 51-59
>
>
>______________________________________________________
>Linux MTD discussion mailing list
>http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
>
>
Yes it possible,
You can use cmdpartion if it is present in the kernel, or static partion.
regards
michael
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-03-10 13:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-10 13:25 NAND + partitions Selmeci, Tamas
2006-03-10 13:35 ` Michael Trimarchi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox