From: <Tudor.Ambarus@microchip.com>
To: <tkuw584924@gmail.com>, <linux-mtd@lists.infradead.org>
Cc: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
<p.yadav@ti.com>, <Bacem.Daassi@infineon.com>,
<Takahiro.Kuwano@infineon.com>
Subject: Re: [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse
Date: Thu, 21 Apr 2022 10:38:27 +0000 [thread overview]
Message-ID: <4420110b-356f-a738-b5e2-233200e0637f@microchip.com> (raw)
In-Reply-To: <d705a2c1fc8d0a59c93454aa05642aafe4fc960b.1650532121.git.Takahiro.Kuwano@infineon.com>
On 4/21/22 12:40, tkuw584924@gmail.com wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
>
> In 4BAIT parse, keep nor->addr_width because it may be used as
> current address mode in SMPT parse later on.
>
> Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
> ---
> drivers/mtd/spi-nor/core.c | 7 ++++++-
> drivers/mtd/spi-nor/sfdp.c | 1 -
> 2 files changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 40ba45328975..87603a99938f 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2210,7 +2210,12 @@ static int spi_nor_default_setup(struct spi_nor *nor,
> static int spi_nor_set_addr_width(struct spi_nor *nor)
> {
> if (nor->addr_width) {
> - /* already configured from SFDP */
> + /*
> + * Already configured from SFDP. Use an address width of 4 in
> + * case the device has 4byte opcodes.
> + */
> + if (nor->addr_width == 3 && nor->flags & SNOR_F_HAS_4BAIT)
> + nor->addr_width = 4;
> } else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
Can we have this instead?
commit 61d73dea7e63db4c7a3ffaa7f2b5068fb71c2d8b
Author: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Date: Thu Apr 21 18:40:21 2022 +0900
mtd: spi-nor: Retain nor->addr_width at 4BAIT parse
In 4BAIT parse, keep nor->addr_width because it may be used as
current address mode in SMPT parse later on.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 2bfa84100d38..7095bf897318 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2272,6 +2272,9 @@ static int spi_nor_default_setup(struct spi_nor *nor,
static int spi_nor_set_addr_width(struct spi_nor *nor)
{
+ if (nor->flags & SNOR_F_HAS_4BAIT)
+ nor->addr_width = 4;
+
if (nor->addr_width) {
/* already configured from SFDP */
} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index a5211543d30d..b2cc3bfe0d5c 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -1098,7 +1098,6 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
* Spansion memory. However this quirk is no longer needed with new
* SFDP compliant memories.
*/
- nor->addr_width = 4;
nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
/* fall through */
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2022-04-21 10:39 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-21 9:40 [PATCH v13 0/4] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t tkuw584924
2022-04-21 9:40 ` [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse tkuw584924
2022-04-21 10:38 ` Tudor.Ambarus [this message]
2022-04-21 10:48 ` Takahiro Kuwano
2022-04-21 11:29 ` Michael Walle
2022-04-21 12:06 ` Tudor.Ambarus
2022-04-21 13:01 ` Michael Walle
2022-04-21 13:13 ` Tudor.Ambarus
2022-04-21 13:42 ` Michael Walle
2022-04-21 13:56 ` Tudor.Ambarus
2022-04-21 14:26 ` Takahiro Kuwano
2022-04-27 4:16 ` Takahiro Kuwano
2022-04-27 6:35 ` Tudor.Ambarus
2022-04-21 9:40 ` [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit tkuw584924
2022-04-21 10:41 ` Tudor.Ambarus
2022-04-21 10:47 ` Takahiro Kuwano
2022-04-21 10:56 ` Tudor.Ambarus
2022-04-21 11:36 ` Tudor.Ambarus
2022-04-21 11:48 ` Tudor.Ambarus
2022-04-22 9:04 ` Takahiro Kuwano
2022-04-21 9:40 ` [PATCH v13 3/4] mtd: spi-nor: spansion: Add local function to discover page size tkuw584924
2022-04-21 10:43 ` Tudor.Ambarus
2022-04-22 9:14 ` Takahiro Kuwano
2022-04-21 9:40 ` [PATCH v13 4/4] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups tkuw584924
2022-04-21 10:45 ` Tudor.Ambarus
2022-04-21 10:53 ` Takahiro Kuwano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4420110b-356f-a738-b5e2-233200e0637f@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=Bacem.Daassi@infineon.com \
--cc=Takahiro.Kuwano@infineon.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=richard@nod.at \
--cc=tkuw584924@gmail.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox