From: "Chen,Xi" <xichen@sjtu.edu.cn>
To: linux-mtd@lists.infradead.org
Subject: XIP kernel(2.6.11 with MTD) fail in compiling
Date: Thu, 01 Jun 2006 21:27:06 +0800 [thread overview]
Message-ID: <447EEB2A.70307@sjtu.edu.cn> (raw)
Hello,
I'm working on a PXA-272 based development board and trying to enable a
XIP kernel for it.
The root file system needs to be JFFS2, so MTD support should be
included. When I tried to
boot the kernel, it stalled at that message:
===============================================
......
eth0: cs8900 rev K found at 0xf0000300 no EEPROM
cs89x0: No EEPROM, relying on command line....
cs89x0 media RJ-45, IRQ 41, programmed I/O, MAC 00:0b:f4:2f:9b:e5
Probing flash0 at physical address 0x00000000 (32-bit bankwidth)
===============================================
I found an option in kernel configuration, named "MTD_XIP" and it seemed
a solution.
I also added a "-mlong-calls" option to CFLAGS when XIP enabled, in case
some function
calls exceeded the PC24 limitation in ARM.
Compilation errors occured like that:
===============================================
drivers/built-in.o(.text+0x59130): In function `cfi_intelext_write_words':
: relocation truncated to fit: R_ARM_PC24 .data
drivers/built-in.o(.text+0x591bc): In function `cfi_intelext_write_words':
: relocation truncated to fit: R_ARM_PC24 .data
drivers/built-in.o(.text+0x59270): In function `cfi_intelext_write_words':
: relocation truncated to fit: R_ARM_PC24 .data
drivers/built-in.o(.text+0x593e4): In function `cfi_intelext_write_buffers':
: relocation truncated to fit: R_ARM_PC24 .data
drivers/built-in.o(.data+0x8a40): In function `do_xxlock_oneblock':
: relocation truncated to fit: R_ARM_PC24 .text
drivers/built-in.o(.data+0x8aa4): In function `do_xxlock_oneblock':
: relocation truncated to fit: R_ARM_PC24 .text
drivers/built-in.o(.data+0x8d14): In function `do_xxlock_oneblock':
: relocation truncated to fit: R_ARM_PC24 .text
drivers/built-in.o(.data+0x8dbc): In function `do_xxlock_oneblock':
: relocation truncated to fit: R_ARM_PC24 .text
drivers/built-in.o(.data+0x8eb4): In function `do_write_oneword':
: relocation truncated to fit: R_ARM_PC24 .text
drivers/built-in.o(.data+0x8f38): In function `do_write_oneword':
: relocation truncated to fit: R_ARM_PC24 .text
drivers/built-in.o(.data+0x92e4): In function `do_write_oneword':
: additional relocation overflows omitted from the output
make: *** [.tmp_vmlinux1] Error 1
===============================================
Anyone knows why the linker still complains, even with "-mlong-calls" used?
My cross compile toolchain versions:
arm-linux-gcc 3.4.3
binutils 2.16
And some basic info about my memory layout:
flash memory start from 0x00000000, 64MB
SDRAM start from 0xa0000000, 64MB
Thanks a lot for your time.
Chen,Xi
next reply other threads:[~2006-06-01 13:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-01 13:27 Chen,Xi [this message]
2006-06-01 14:14 ` XIP kernel(2.6.11 with MTD) fail in compiling Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=447EEB2A.70307@sjtu.edu.cn \
--to=xichen@sjtu.edu.cn \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox