* NAND oob bad blocks
@ 2006-06-07 7:30 Terence Soh
0 siblings, 0 replies; only message in thread
From: Terence Soh @ 2006-06-07 7:30 UTC (permalink / raw)
To: linux-mtd
Hi,
I'm using 2.6.11 kernel with the MTD drivers from kernel.org. On my
board, u-boot is reporting 2 bad blocks while the kernel is reporting
only 1 bad block.
Looking at the MTD Nand Driver Programming Interface, it says the bad
block marker only applies fo the first page in a block. However, both
u-boot and the Samsung documentation(K9F1208X0B)says that either the 1st
or 2nd page of every initial block has non-FFh data at the column
address of 517.
What am I missing here or is this a case of old code/documentation?
Thanks,
Terence.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-06-07 7:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-07 7:30 NAND oob bad blocks Terence Soh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox