public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Claudio Lanconelli <lanconelli.claudio@eptar.com>
To: tglx@linutronix.de
Cc: linux-mtd@lists.infradead.org
Subject: Re: FAT vs jFFS2 for NAND.
Date: Tue, 20 Jun 2006 19:26:27 +0200	[thread overview]
Message-ID: <44982FC3.8080501@eptar.com> (raw)
In-Reply-To: <1150811549.6780.192.camel@localhost.localdomain>

[-- Attachment #1: Type: text/plain, Size: 359 bytes --]

Thanks Thomas for your tips.
Here a second try, does it look fine?
I attached the file instead of inline to avoid tab/space replacement by 
email client.
however can I ask you where I find prototype/usage for mtd->block_is_bad()?
And against which tree I need to build it? Be patient, please.

Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>

[-- Attachment #2: ssfdc_ro.c --]
[-- Type: text/plain, Size: 12267 bytes --]

/*
 * Linux driver for SSFDC Flash Translation Layer (Read only)
 * (c) 2005 Eptar srl
 * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
 *
 * Based on NTFL and MTDBLOCK_RO drivers
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/hdreg.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/blktrans.h>

/* #undef CONFIG_SSFDCRO_ENABLE_GETGEO */

struct ssfdcr_record {
	struct mtd_blktrans_dev mbd;
	int usecount;
#ifdef CONFIG_SSFDCRO_ENABLE_GETGEO
	unsigned char heads;
	unsigned char sectors;
	unsigned short cylinders;
#endif
	int cis_block;			/* block n. containing CIS/IDI */
	int erase_size;			/* phys_block_size */
	unsigned short *logic_block_map; /* all zones (max 8192 phys blocks on
					    the 128MB) */
	int map_len;			/* n. phys_blocks on the card */
};

static const struct nand_oobinfo ssfdc_oobinfo = {
	.useecc = MTD_NANDECC_PLACEONLY,
	.eccbytes = 6,
	.eccpos = {14, 13, 15, 9, 8, 10}
};

#define SSFDCR_MAJOR		44
#define SSFDCR_PARTN_BITS	3

#define SECTOR_SIZE		512
#define SECTOR_SHIFT	9
#define OOB_SIZE		16

#define MAX_LOGIC_BLK_PER_ZONE	1000
#define MAX_PHYS_BLK_PER_ZONE	1024

#define ArraySize(x)	( sizeof(x) / sizeof((x)[0]) )

#define KB(x)	( (x) * 1024L )
#define MB(x)	( KB(x) * 1024L )

/** CHS Table
		1MB	2MB	4MB	8MB	16MB	32MB	64MB	128MB
NCylinder	125	125	250	250	500	500	500	500
NHead		4	4	4	4	4	8	8	16
NSector		4	8	8	16	16	16	32	32
SumSector	2,000	4,000	8,000	16,000	32,000	64,000	128,000	256,000
SectorSize	512	512	512	512	512	512	512	512
**/

#ifdef CONFIG_SSFDCRO_ENABLE_GETGEO

typedef struct {
	unsigned long size;
	unsigned short cyl;
	unsigned char head;
	unsigned char sec;
} chs_entry_t;

//Must be ordered by size
static const chs_entry_t chs_table[] = {
	{ MB(  1), 125,  4,  4 },
	{ MB(  2), 125,  4,  8 },
	{ MB(  4), 250,  4,  8 },
	{ MB(  8), 250,  4, 16 },
	{ MB( 16), 500,  4, 16 },
	{ MB( 32), 500,  8, 16 },
	{ MB( 64), 500,  8, 32 },
	{ MB(128), 500, 16, 32 },
	{ 0 },
};

static int get_chs(unsigned long size, unsigned short *cyl, unsigned char *head,
			unsigned char *sec)
{
	int k;
	int found = 0;

	k = 0;
	while (chs_table[k].size > 0 && size > chs_table[k].size)
		k++;

	if (chs_table[k].size > 0) {
		if (cyl)
			*cyl = chs_table[k].cyl;
		if (head)
			*head = chs_table[k].head;
		if (sec)
			*sec = chs_table[k].sec;
		found = 1;
	}

	return found;
}
#endif


static const uint8_t nibble_count_bits[16] = {
	0,1,1,2,1,2,2,3,1,2,2,3,2,3,3,4
};

//Counts bit 1 in a byte. Use look up table to speed up count
static int byte_count_bits(uint8_t val)
{
	return nibble_count_bits[val >> 4] + nibble_count_bits[val & 0x0f];
}

static const uint8_t cis_numbers[] = {
	0x01, 0x03, 0xD9, 0x01, 0xFF, 0x18, 0x02, 0xDF, 0x01, 0x20
};


/* Read and check for a valid CIS sector */
static int get_valid_cis_sector(struct mtd_info *mtd)
{
	int ret, k, cis_sector;
	size_t retlen;
	loff_t offset;
	uint8_t sect_buf[SECTOR_SIZE];

	/* Look for CIS/IDI sector on the first GOOD block (give up after 4 bad
	   blocks). If the first good block doesn't contain CIS number the flash
	   is not SSFDC formatted */
	cis_sector = -1;
	for (k = 0, offset = 0; k < 4; k++, offset += mtd->erasesize) {
		if (!mtd->block_is_bad(mtd, offset)) {
			ret = mtd->read(mtd, offset, SECTOR_SIZE, &retlen,
				sect_buf);

			/* CIS pattern match on the sector buffer */
			if ( ret < 0 || retlen != SECTOR_SIZE ) {
				printk(KERN_WARNING
					"SSFDC_RO:can't read CIS/IDI sector\n");
			} else if ( !memcmp(sect_buf, cis_numbers,
					sizeof(cis_numbers)) ) {
				/* Found */
				cis_sector = (int)(offset >> SECTOR_SHIFT);
			} else {
				DEBUG(MTD_DEBUG_LEVEL0,
					"SSFDC_RO: CIS/IDI sector not found"
					" on %s (mtd%d)\n", mtd->name,
					mtd->index);
			}
			break;
		}
	}

	return cis_sector;
}

/* Read physical sector (just a wrapper to MTD_READ) */
static int read_physical_sector(struct mtd_info *mtd, uint8_t *sect_buf,
				int sect_no)
{
	int ret;
	size_t retlen;
	loff_t offset = (loff_t)sect_no << SECTOR_SHIFT;

	ret = mtd->read(mtd, offset, SECTOR_SIZE, &retlen, sect_buf);
	if ( ret < 0 || retlen != SECTOR_SIZE )
		return -1;

	return 0;
}

/* Parity calculator on a word of n bit size */
static int get_parity(int number, int size)
{
 	int k;
	int parity;

	parity = 1;
	for (k = 0; k < size; k++) {
		parity += (number >> k);
		parity &= 1;
	}
	return parity;
}

/* Read and validate the logical block address field stored in the OOB */
static int get_logical_address(uint8_t *oob_buf)
{
	int block_address, parity;
	int offset[2] = {6, 11}; /* offset of the 2 address fields within OOB */
	int j;
	int ok = 0;

	/* Look for the first valid logical address
	   Valid address has fixed pattern on most significant bits and
	   parity check */
	for (j = 0; j < ArraySize(offset); j++)	{
		block_address = ((int)oob_buf[offset[j]] << 8) |
			oob_buf[offset[j]+1];

		/* Check for the signature bits in the address field
		   (most significant bits) */
		if ((block_address & ~0x7FF) == 0x1000) {
			parity = block_address & 0x01;
			block_address &= 0x7FF;
			block_address >>= 1;

			if (get_parity(block_address, 10) != parity) {
				DEBUG(MTD_DEBUG_LEVEL0,
					"SSFDC_RO: logical address field%d"
					"parity error(0x%04X)\n", j+1,
					block_address);
			} else {
				ok = 1;
				break;
			}
		}
	}

	if ( !ok )
		block_address = -2;

	DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n",
		block_address);

	return block_address;
}

/* Build the logic block map */
static int build_logical_block_map(struct ssfdcr_record *ssfdc)
{
	unsigned long offset;
	uint8_t oob_buf[OOB_SIZE];
	int ret, block_address, phys_block;
	size_t retlen;
	struct mtd_info *mtd = ssfdc->mbd.mtd;

	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
		ssfdc->map_len, (unsigned long)ssfdc->map_len *
		ssfdc->erase_size / 1024 );

	/* Scan every physical block, skip CIS block */
	for (phys_block = ssfdc->cis_block + 1; phys_block < ssfdc->map_len;
			phys_block++) {
		offset = (unsigned long)phys_block * ssfdc->erase_size;
		ret = mtd->read_oob(mtd, offset, OOB_SIZE, &retlen, oob_buf);
		if (ret < 0 || retlen != OOB_SIZE) {
			DEBUG(MTD_DEBUG_LEVEL0,
				"SSFDC_RO: mtd read_oob() failed at %lu\n",
				offset);
			return -1;
		}
		if (mtd->block_is_bad(mtd, offset))
			block_address = -1;
		else
			block_address = get_logical_address(oob_buf);

		/* Skip bad blocks and invalid addresses */
		if (block_address >= 0 &&
				block_address < MAX_LOGIC_BLK_PER_ZONE) {
			int zone_index;

			zone_index = phys_block / MAX_PHYS_BLK_PER_ZONE;
			block_address += zone_index * MAX_LOGIC_BLK_PER_ZONE;
			ssfdc->logic_block_map[block_address] =
				(unsigned short)phys_block;

			DEBUG(MTD_DEBUG_LEVEL2,
				"SSFDC_RO: build_block_map() phys_block=%d,"
				"logic_block_addr=%d, zone=%d\n",
				phys_block, block_address, zone_index);
		}
	}
	return 0;
}

static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
{
	struct ssfdcr_record *ssfdc;
	int cis_sector;

	/* Check for NAND flash */
	if (mtd->type != MTD_NANDFLASH)
		return;

	/* Check for SSDFC format by reading CIS/IDI sector */
	cis_sector = get_valid_cis_sector(mtd);
	if (cis_sector == -1)
		return;

	ssfdc = kzalloc(sizeof(struct ssfdcr_record), GFP_KERNEL);
	if (!ssfdc) {
		printk(KERN_WARNING
			"SSFDC_RO: out of memory for data structures\n");
		return;
	}

	ssfdc->mbd.mtd = mtd;
	ssfdc->mbd.devnum = -1;
	ssfdc->mbd.blksize = SECTOR_SIZE;
	ssfdc->mbd.tr = tr;
	ssfdc->mbd.readonly = 1;

	ssfdc->cis_block = cis_sector / (mtd->erasesize >> SECTOR_SHIFT);
	ssfdc->erase_size = mtd->erasesize;
	ssfdc->map_len = mtd->size / mtd->erasesize;

	DEBUG(MTD_DEBUG_LEVEL1,
		"SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
		ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
		(ssfdc->map_len + MAX_PHYS_BLK_PER_ZONE - 1) /
		MAX_PHYS_BLK_PER_ZONE);

#ifdef CONFIG_SSFDCRO_ENABLE_GETGEO
	/* Set geometry */
	get_chs( mtd->size, NULL, &ssfdc->heads, &ssfdc->sectors);
	ssfdc->cylinders = (unsigned short)((mtd->size >> SECTOR_SHIFT) /
			((long)ssfdc->sectors * (long)ssfdc->heads));

	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
		ssfdc->cylinders, ssfdc->heads , ssfdc->sectors, 
		(long)ssfdc->cylinders * (long)ssfdc->heads *
		(long)ssfdc->sectors );

	ssfdc->mbd.size = (long)ssfdc->heads * (long)ssfdc->cylinders *
				(long)ssfdc->sectors;
#else
	ssfdc->mbd.size  = ssfdc->map_len * (ssfdc->erase_size >> SECTOR_SHIFT);
#endif

	/* Allocate logical block map */
	ssfdc->logic_block_map = kmalloc( sizeof(ssfdc->logic_block_map[0]) *
						ssfdc->map_len, GFP_KERNEL);
	if (!ssfdc->logic_block_map) {
		printk(KERN_WARNING
			"SSFDC_RO: out of memory for data structures\n");
		goto out_err;
	}
	memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) *
		ssfdc->map_len);

	/* Build logical block map */
	if (build_logical_block_map(ssfdc) < 0)
		goto out_err;

	/* Register device + partitions */
	if (add_mtd_blktrans_dev(&ssfdc->mbd))
		goto out_err;

	printk(KERN_INFO "SSFDC_RO: Found ssfdc%c on mtd%d (%s)\n",
		ssfdc->mbd.devnum + 'a', mtd->index, mtd->name);
	return;

out_err:
	kfree(ssfdc->logic_block_map);
        kfree(ssfdc);
}

static void ssfdcr_remove_dev(struct mtd_blktrans_dev *dev)
{
	struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;

	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);

	del_mtd_blktrans_dev(dev);
	kfree(ssfdc->logic_block_map);
	kfree(ssfdc);
}

static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
				unsigned long logic_sect_no, char *buf)
{
	struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
	int sectors_per_block, offset, block_address;

	sectors_per_block = ssfdc->erase_size >> SECTOR_SHIFT;
	offset = (int)(logic_sect_no % sectors_per_block);
	block_address = (int)(logic_sect_no / sectors_per_block);

	DEBUG(MTD_DEBUG_LEVEL3,
		"SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
		" block_addr=%d\n", logic_sect_no, sectors_per_block, offset,
		block_address);

	if (block_address >= ssfdc->map_len)
		BUG();

	block_address = ssfdc->logic_block_map[block_address];

	DEBUG(MTD_DEBUG_LEVEL3,
		"SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
		block_address);

	if (block_address < 0xffff) {
		unsigned long sect_no;

		sect_no = (unsigned long)block_address * sectors_per_block +
				offset;

		DEBUG(MTD_DEBUG_LEVEL3,
			"SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
			sect_no);

		if (read_physical_sector( ssfdc->mbd.mtd, buf, sect_no ) < 0)
			return -EIO;
	} else {
		memset(buf, 0xff, SECTOR_SIZE);
	}

	return 0;
}

#ifdef CONFIG_SSFDCRO_ENABLE_GETGEO
static int ssfdcr_getgeo(struct mtd_blktrans_dev *dev,  struct hd_geometry *geo)
{
	struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;

	DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
			ssfdc->cylinders, ssfdc->heads, ssfdc->sectors);

	geo->heads = ssfdc->heads;
	geo->sectors = ssfdc->sectors;
	geo->cylinders = ssfdc->cylinders;

	return 0;
}
#endif

/****************************************************************************
 *
 * Module stuff
 *
 ****************************************************************************/

static struct mtd_blktrans_ops ssfdcr_tr = {
	.name		= "ssfdc",
	.major		= SSFDCR_MAJOR,
	.part_bits	= SSFDCR_PARTN_BITS,
#ifdef CONFIG_SSFDCRO_ENABLE_GETGEO
	.getgeo		= ssfdcr_getgeo,
#endif
	.readsect	= ssfdcr_readsect,
	.add_mtd	= ssfdcr_add_mtd,
	.remove_dev	= ssfdcr_remove_dev,
	.owner		= THIS_MODULE,
};

static int __init init_ssfdcr(void)
{
	printk(KERN_INFO "SSFDC Read only Flash Translation layer\n");

	return register_mtd_blktrans(&ssfdcr_tr);
}

static void __exit cleanup_ssfdcr(void)
{
	deregister_mtd_blktrans(&ssfdcr_tr);
}

module_init(init_ssfdcr);
module_exit(cleanup_ssfdcr);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
MODULE_DESCRIPTION("Flash Translation Layer for read-only SSDFC SmartMedia card");

  reply	other threads:[~2006-06-20 17:33 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-28  2:58 FAT vs jFFS2 for NAND Han Chang
2006-05-28  5:54 ` Charles Manning
2006-06-15  0:34   ` Han Chang
2006-06-15  7:53     ` Thomas Gleixner
2006-06-19 18:31       ` Han Chang
2006-06-19 18:38         ` Thomas Gleixner
2006-06-19 20:23         ` David Woodhouse
2006-06-19 21:10           ` Charles Manning
2006-06-20 11:31         ` Claudio Lanconelli
2006-06-20 12:30           ` David Woodhouse
2006-06-20 13:25             ` Claudio Lanconelli
2006-06-20 13:52               ` Thomas Gleixner
2006-06-20 17:26                 ` Claudio Lanconelli [this message]
2006-06-20 17:41                   ` Thomas Gleixner
2006-06-21 14:15                     ` Claudio Lanconelli
2006-06-21 18:19                       ` Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44982FC3.8080501@eptar.com \
    --to=lanconelli.claudio@eptar.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox