From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from [202.62.79.227] (helo=gnu.picopeta.com) by pentafluge.infradead.org with esmtp (Exim 4.62 #1 (Red Hat Linux)) id 1FxMS4-0005lE-Fb for linux-mtd@lists.infradead.org; Mon, 03 Jul 2006 12:18:57 +0100 Message-ID: <44A8FE6A.4040002@picopeta.com> Date: Mon, 03 Jul 2006 16:54:26 +0530 From: Girish MIME-Version: 1.0 To: girish@picopeta.com Subject: Re: 2k page Nand flash problem References: <44A4D796.4070107@picopeta.com> In-Reply-To: <44A4D796.4070107@picopeta.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Cc: linux-mtd@lists.infradead.org Reply-To: girish@picopeta.com List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , hi , Sorry i forgot to mention that i am using NAND_ECC_SOFT option and chip_delay = 25us. Thanks & regards Girish Girish wrote: >hi all, > > I have > PXA-based board > Hynix 256 Mb Nand flash(page size = 2k). > Kernel-2.6.16. > With Samsung 32mb Nand flash kernel-2.6.16 works fine but with Hynix >256 Mb Nand Flash it gives > fallowing error messages .... > > > Uncompressing >Linux......................................................... done, >booting the kernel. >Linux version 2.6.16-g00fdeb89-dirty (root@trojan.picopeta.com) (gcc >version 3.4.2) #147 Fri Jun 30 12:20:49 6CPU: XScale-PXA255 [69052d06] >revision 6 (ARMv5TE) >Machine: Amida Development Platform >Memory policy: ECC disabled, Data cache writeback >Memory clock: 99.53MHz (*27) >Run Mode clock: 199.07MHz (*2) >Turbo Mode clock: 199.07MHz (*1.0, active) >MM: invalid domain in supersection mapping for 0x8000000000 at 0xf0000000 >CPU0: D VIVT undefined 5 cache >CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets >CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets >Built 1 zonelists >Kernel command line: mem=64M console=ttyS0,115200 root=1f02 >PID hash table entries: 512 (order: 9, 8192 bytes) >Console: colour dummy device 80x30 >Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >Memory: 64MB = 64MB total >Memory: 63012KB available (1408K code, 309K data, 76K init) >Mount-cache hash table entries: 512 >CPU: Testing write buffer coherency: ok >NetWinder Floating Point Emulator V0.97 (double precision) >JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. >fuse init (API version 7.6) >io scheduler noop registered (default) >pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART >pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART >pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART >pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART >RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize >loop: loaded (max 8 devices) >Probing Amida Simputer Application Flash at physical address 0x00000000 >(16-bit bankwidth) >Amida Simputer Application Flash: Found 1 x16 devices at 0x0 in 16-bit bank > Intel/Sharp Extended Query Table at 0x0035 >cfi_cmdset_0001: Erase suspend on write enabled >RedBoot partition parsing not available >cmdlinepart partition parsing not available >Using static partitions on Amida Simputer Application Flash >Creating 1 MTD partitions on "Amida Simputer Application Flash": >0x00000000-0x00040000 : "Bootloader" >mtd: Giving out device 0 to Bootloader >PARTITION Done Using static partitions on Amida Simputer Application Flash >physical (0x 8000000), virtual (0xc6900000) >NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB >3,3V 8-bit) >Scanning device for bad blocks >Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit": >0x00000000-0x00180000 : "Kernel" >mtd: Giving out device 1 to Kernel >0x00180000-0x00380000 : "/(cramfs)" >mtd: Giving out device 2 to /(cramfs) >0x00380000-0x10000000 : "/usr/local(jffs2)" >mtd: Giving out device 3 to /usr/local(jffs2) >mice: PS/2 mouse device common for all mice >ts: Compaq touchscreen protocol output >Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 >08:57:20 2006 UTC). >input: Touchscreen panel as /class/input/input0 >Touch screen device number 17156 >ALSA device list: > #0: pxa2xx-ac97 (Philips UCB1400) >VFS: Mounted root (cramfs filesystem) readonly. >Freeing init memory: 76K >/sbin/init >nand_read_ecc: Failed ECC read, page 0x0000042a >nand_read_ecc: Failed ECC read, page 0x0000042a >end_request: I/O error, dev mtdblock2, sector 1192 >Buffer I/O error on device mtdblock2, logical block 149 >Error -5 while decompressing! >c01c1c63(2066)->c3caf000(4096) >Error -3 while decompressing! >c01c2475(2064)->c3cb0000(4096) >Error -3 while decompressing! >c01c1c85(2056)->c3cde000(4096) >/sbin/init: relocation error: /sbin/initKernel panic - not syncing: >Attempted to kill init! >: symbol optind, version GLIBC_2.0 not defined in file libc.so.6 with >link time reference > > >Any Solutions ...... ? > >Thanks & regards >Girish > > > -- ---------------------------------------------------------------------- " Faith begins when Ability ends... Girish A J (girish.a@geodesiconline.com) Associate - Systems, Ph: (80) 2361 8184-86 Ext 135 PicoPeta Simputers Pvt Ltd. Fax: (80) 2361 7568 146 5th Cross, RMV Extension, Bangalore - 560 080. URL http://www.picopeta.com --------------------------------------------------------------------------