From: Vitaly Wool <vwool@ru.mvista.com>
To: kbaidarov <kbaidarov@dev.rtsoft.ru>
Cc: linux-mtd@lists.infradead.org
Subject: Re: [PATCH] [MTD] BLOCK_RO: Readonly Block Device Layer Over MTD
Date: Mon, 20 Nov 2006 15:05:40 +0300 [thread overview]
Message-ID: <45619A14.1010001@ru.mvista.com> (raw)
In-Reply-To: <20061117184055.569da7ad@localhost.localdomain>
kbaidarov wrote:
> Description:
> The following patch adds readonly block device layer over mtd
> that allows to use any filesystem on this device in RO mode and
> thus gain faster mount times and better throughput rates.
>
> How it works:
> Blocks translation routine was added to read sector function. Assuming
> that bad block won't appear during MTD reading and BBT is correct, bad
> block is skipped and requested block is lazily mapped to good one.
> Block driver based on the mtd readonly device driver mtdblock_ro.c and
> translation routine was taken from the patch of Pantelis Antoniou
> (which can be found at
> http://lists.infradead.org/pipermail/linux-mtd/2004-May/009672.html).
>
> Large major 258 has already been assigned by LANANA.
>
> Signed-off-by: Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
>
Acked-by: Vitaly Wool <vwool@ru.mvista.com> ;-)
next prev parent reply other threads:[~2006-11-20 12:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-17 15:40 [PATCH] [MTD] BLOCK_RO: Readonly Block Device Layer Over MTD kbaidarov
2006-11-18 13:15 ` Artem Bityutskiy
2006-11-18 13:33 ` Josh Boyer
2006-11-18 13:35 ` Artem Bityutskiy
2006-11-18 13:40 ` Artem Bityutskiy
2006-11-20 12:15 ` Vitaly Wool
2006-11-20 12:46 ` Artem Bityutskiy
2006-11-20 13:06 ` Vitaly Wool
2006-11-20 13:39 ` Artem Bityutskiy
2006-11-20 13:20 ` Konstantin Baydarov
2006-11-20 12:11 ` Vitaly Wool
2006-11-20 12:05 ` Vitaly Wool [this message]
2006-11-20 14:52 ` Josh Boyer
2006-11-21 10:30 ` Vitaly Wool
2006-11-22 16:56 ` Konstantin Baydarov
2006-12-02 16:41 ` Konstantin Baydarov
2007-09-27 15:05 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45619A14.1010001@ru.mvista.com \
--to=vwool@ru.mvista.com \
--cc=kbaidarov@dev.rtsoft.ru \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox