[PATH] NAND Flash support for Intel IXP4xx platform

["Ruslan V. Sushko" <rsushko@ru.mvista.com>]

The patch adds glue logic to support MTD for NAND flash devices on Intel 
IXP4xx platform

Signed-off-by: rsushko@rus.mvista.com

--------

Index: linux-2.6/drivers/mtd/nand/Kconfig
===================================================================
--- linux-2.6.orig/drivers/mtd/nand/Kconfig
+++ linux-2.6/drivers/mtd/nand/Kconfig
@@ -143,6 +143,13 @@ config MTD_NAND_S3C2410_CLKSTOP
          when the is NAND chip selected or released, but will save
          approximately 5mA of power when there is nothing happening.

+config MTD_NAND_IXP4XX
+       tristate "Support for NAND Flash on Intel IXP4XX based systems"
+       depends on MTD_NAND && ARCH_IXP4XX
+       help
+         This enable the use of NAND flash on Intel IXP400 based platforms.
+         Currently this is only supported on KIXRP435 platform.
+
 config MTD_NAND_DISKONCHIP
        tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND 
reimplementation) (EXPERIMENTAL)"
        depends on MTD_NAND && EXPERIMENTAL
Index: linux-2.6/drivers/mtd/nand/Makefile
===================================================================
--- linux-2.6.orig/drivers/mtd/nand/Makefile
+++ linux-2.6/drivers/mtd/nand/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_MTD_NAND_CS553X)         += cs553x
 obj-$(CONFIG_MTD_NAND_NDFC)            += ndfc.o
 obj-$(CONFIG_MTD_NAND_AT91)            += at91_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)   += excite_nandflash.o
+obj-$(CONFIG_MTD_NAND_IXP4XX)          += ixp4xx_nand.o

 nand-objs := nand_base.o nand_bbt.o
 cafe_nand-objs := cafe.o cafe_ecc.o
Index: linux-2.6/drivers/mtd/nand/ixp4xx_nand.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/mtd/nand/ixp4xx_nand.c
@@ -0,0 +1,217 @@
+/*
+ * drivers/mtd/nand/ixp4xx_nand.c
+ *
+ * Copyright (C) 2006 Intel Corporation.
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/arch/nand.h>
+#include <asm/hardware.h>
+#include <asm/delay.h>
+
+/*
+ * MTD structure for NAND controller
+ */
+static struct mtd_info *ixp4xx_mtd = NULL;
+static struct mtd_partition *ixp4xx_nand_parts = NULL;
+const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct ixp4xx_faddr_info_t {
+       int offset;
+       void (*chip_select) (unsigned int ctrl);
+} ixp4xx_faddr_info;
+
+/**
+ * ixp_write_buf -  write buffer to chip
+ * @mtd:       MTD device structure
+ * @buf:       data buffer
+ * @len:       number of bytes to write
+ *
+ *  write function for 8bit buswith
+ */
+static void ixp_write_buf(struct mtd_info *mtd, const u_char * buf, int 
len)
+{
+       int i;
+       struct nand_chip *this = mtd->priv;
+
+       for (i = 0; i < len; i++)
+               writeb(buf[i], this->IO_ADDR_W);
+}
+
+static void ixp4xx_hwcontrol(struct mtd_info *mtd, int cmd, unsigned 
int ctrl)
+{
+       struct nand_chip *this = mtd->priv;
+       struct ixp4xx_faddr_info_t *addr_info = this->priv;
+       if (ctrl & NAND_CTRL_CHANGE) {
+               addr_info->offset = (ctrl & NAND_CLE) ? IXP4XX_NAND_CLE : 0;
+               addr_info->offset |= (ctrl & NAND_ALE) ? IXP4XX_NAND_ALE 
: 0;
+               if (addr_info->chip_select)
+                       addr_info->chip_select(ctrl);
+       }
+
+       if (cmd != NAND_CMD_NONE)
+               writeb(cmd, this->IO_ADDR_W + addr_info->offset);
+}
+
+static int ixp4xx_nand_flash_probe(struct platform_device *dev)
+{
+       int err;
+       int nb_of_parts;
+       struct nand_chip *this;
+       void __iomem *nand_io_base;
+       struct ixp4xx_nand_platform_data *plat = dev->dev.platform_data;
+
+       if (!plat)
+               return -ENODEV;
+
+       if (plat->width != 1) {
+               printk(KERN_ERR "%s: %d bits bus width is not support for "
+                      "ixp4xx driver\n", __FUNCTION__, plat->width * 8);
+               return -EINVAL;
+       }
+
+       if (plat->init) {
+               err = plat->init();
+               if (err)
+                       return err;
+       }
+
+       /* Allocate memory for MTD device structure and private data */
+       ixp4xx_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct 
nand_chip),
+                            GFP_KERNEL);
+
+       if (ixp4xx_mtd == NULL) {
+               printk(KERN_ERR "Fail on mem alloc for NAND MTD dev\n");
+               return -ENOMEM;
+       }
+
+       /* Initialize structures and build the linkage to private data */
+       memset(ixp4xx_mtd, 0,
+              sizeof(struct mtd_info) + sizeof(struct nand_chip));
+       this = (struct nand_chip *)(&ixp4xx_mtd[1]);
+
+       ixp4xx_mtd->priv = this;
+
+       ixp4xx_mtd->owner = THIS_MODULE;
+       ixp4xx_mtd->name = "ixp4xx-nand";
+
+       /* ioremap the io of NAND Flash */
+       nand_io_base = ioremap(dev->resource->start,
+                              dev->resource->end - dev->resource->start 
+ 1);
+       if (!nand_io_base) {
+               printk(KERN_ERR "Unable to map nand flash IO space\n");
+               err = -EIO;
+               goto error;
+       }
+
+       ixp4xx_faddr_info.offset = 0;
+       ixp4xx_faddr_info.chip_select = plat->chip_select;
+
+       /* Set address of hardware control function */
+       this->cmd_ctrl = ixp4xx_hwcontrol;
+       this->dev_ready = NULL; /* KIXRP435 has no GPIO pins route to R/B */
+       this->chip_delay = 30;  /* 30 us command delay time */
+       this->ecc.mode = NAND_ECC_SOFT;
+       this->options = NAND_NO_AUTOINCR;
+       this->IO_ADDR_R = nand_io_base;
+       this->IO_ADDR_W = nand_io_base;
+       this->priv = &ixp4xx_faddr_info;
+       this->write_buf = ixp_write_buf;
+
+       /* Scan to find existence of the device */
+       if (nand_scan(ixp4xx_mtd, 1)) {
+               err = -ENXIO;
+               goto error;
+       }
+
+       nb_of_parts = parse_mtd_partitions(ixp4xx_mtd, part_probes,
+                                          &ixp4xx_nand_parts, 0);
+
+       if (nb_of_parts <= 0) { /* No partition from parsing, use default */
+               printk(KERN_INFO "Loading default partition table\n");
+               ixp4xx_nand_parts = plat->parts;
+               nb_of_parts = plat->nr_parts;
+       }
+
+       /* Register the partitions */
+       err = add_mtd_partitions(ixp4xx_mtd, ixp4xx_nand_parts, 
nb_of_parts);
+       if (err) {
+               printk(KERN_ERR "Failed to add MTD partitions\n");
+               if (ixp4xx_nand_parts != plat->parts)
+                       kfree(ixp4xx_nand_parts);
+               goto error;
+       }
+       return 0;
+
+      error:
+       if (nand_io_base)
+               iounmap((void *)nand_io_base);
+
+       if (ixp4xx_mtd)
+               kfree(ixp4xx_mtd);
+       return err;
+}
+
+static int ixp4xx_nand_flash_remove(struct platform_device *dev)
+{
+       struct ixp4xx_nand_platform_data *plat = dev->dev.platform_data;
+       struct nand_chip *this = (struct nand_chip *)&ixp4xx_mtd[1];
+
+       if (plat->exit)
+               plat->exit();
+
+       /* Unmap IO */
+       iounmap((void *)this->IO_ADDR_W);
+
+       /* Release resources, unregister device */
+       nand_release(ixp4xx_mtd);
+
+       /* Free the MTD device structure */
+       kfree(ixp4xx_mtd);
+
+       /* Free the parsed partition table */
+       if (ixp4xx_nand_parts != plat->parts)
+               kfree(ixp4xx_nand_parts);
+       return 0;
+}
+
+static struct platform_driver ixp4xx_nand_flash_driver = {
+       .probe = ixp4xx_nand_flash_probe,
+       .remove = ixp4xx_nand_flash_remove,
+       .driver = {
+                  .name = "IXP4XX-NAND-Flash",
+                  },
+};
+
+static int __init ixp4xx_nand_flash_init(void)
+{
+       return platform_driver_register(&ixp4xx_nand_flash_driver);
+}
+
+static void __exit ixp4xx_nand_flash_exit(void)
+{
+       platform_driver_unregister(&ixp4xx_nand_flash_driver);
+}
+
+module_init(ixp4xx_nand_flash_init);
+module_exit(ixp4xx_nand_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on "
+                  "IXP4xx-based platform");