public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Savin Zlobec <savinz@users.sourceforge.net>
To: linux-mtd@lists.infradead.org
Subject: Problems with ST NAND512W3A nand flash
Date: Wed, 16 May 2007 16:40:51 +0200	[thread overview]
Message-ID: <464B17F3.9040804@users.sourceforge.net> (raw)

Hi All!

I am working on a AT91RM9200 based board with ST NAND512W3A2B flash.
Kernel version is 2.6.19.7 with patches from maxim.org.za/at91_26.html.
Everything works perfectly, except for boot time NAND chip
identification which fails every once in a while. NAND signature
is 0x20 0x76, but sometimes I get 0x20 0x20. My first guess was
timing problems, but I've double checked everything and all signals
are inside the specs. I've also tested the chip with shorter and
longer setup, hold and pulse times for read and write, but without
any success. Trying different kernels didn't help either.

Any ideas and/or comments would be very much appreciated.


Thanks,
savin

             reply	other threads:[~2007-05-16 14:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-16 14:40 Savin Zlobec [this message]
2007-05-16 16:50 ` Problems with ST NAND512W3A nand flash MikeW
2007-05-17 15:45 ` Savin Zlobec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=464B17F3.9040804@users.sourceforge.net \
    --to=savinz@users.sourceforge.net \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox