From: "Zaheer A.M" <m1005527@mindtree.com>
To: <linux-mtd@lists.infradead.org>
Subject: NOR flash support on AT91RM9200.
Date: Mon, 29 Oct 2007 20:06:59 +0530 [thread overview]
Message-ID: <4725F00B.1040105@mindtree.com> (raw)
Hello,
I am working on the Atmel At91RM9200-EK board, and have been able to
boot out of NFS with the 2.6.22 kernel.
However I would like to use the on-board NOR-flash(8 MB), create MTD
partitions and boot out of it.
Let me know if anyone has worked on the same and can provide me any
info/patch.
Regards,
Zaheer.
DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited.
E-mail may contain viruses. Before opening attachments please check them for viruses and defects. While MindTree Consulting Limited (MindTree) has put in place checks to minimize the risks, MindTree will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside.
Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.
MindTree reserves the right to monitor and review the content of all messages sent to or from MindTree e-mail address. Messages sent to or from this e-mail address may be stored on the MindTree e-mail system or else where.
next reply other threads:[~2007-10-29 14:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-29 14:36 Zaheer A.M [this message]
2007-10-30 15:27 ` NOR flash support on AT91RM9200 David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4725F00B.1040105@mindtree.com \
--to=m1005527@mindtree.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox