From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from exsmtp03.microchip.com ([198.175.253.49] helo=email.microchip.com) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1cTR46-0006PZ-Jq for linux-mtd@lists.infradead.org; Tue, 17 Jan 2017 10:32:41 +0000 Subject: Re: [PATCH v2] mtd: spi-nor: add dt support for Everspin MRAMs To: =?UTF-8?Q?Uwe_Kleine-K=c3=b6nig?= , Masahiko Iwamoto , Jagan Teki , Marek Vasut References: <20170116210039.25267-1-u.kleine-koenig@pengutronix.de> CC: , , =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= , Geert Uytterhoeven , Mark Rutland , From: Cyrille Pitchen Message-ID: <480df61d-c949-b3b0-61a4-d9db17f09e7d@atmel.com> Date: Tue, 17 Jan 2017 11:32:11 +0100 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Le 17/01/2017 à 10:48, Cyrille Pitchen a écrit : > Hi, > > Le 16/01/2017 à 22:00, Uwe Kleine-König a écrit : >> The MR25 family doesn't support JEDEC, so they need explicit mentioning >> in the list of supported spi IDs. This makes it possible to add these >> using for example: >> >> compatible = "everspin,mr25h40"; >> >> Signed-off-by: Uwe Kleine-König >> --- >> Changes since (implicit) v1: >> - use Kib instead of kib >> >> drivers/mtd/devices/m25p80.c | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c >> index 9cf7fcd28034..aa50bd96de3a 100644 >> --- a/drivers/mtd/devices/m25p80.c >> +++ b/drivers/mtd/devices/m25p80.c >> @@ -305,6 +305,11 @@ static const struct spi_device_id m25p_ids[] = { >> {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, >> {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, >> >> + /* Everspin MRAMs */ >> + { "mr25h256" }, /* 256 Kib, 40 MHz */ > > There is already a "mr25h256" entry in the m25p_ids[] array. > It's a good idea to regroup everspin memories but it might be better to > reuse the existing entry. > > The previous entry is between "at25df321a", ... and "mx25l4005a" so it > doesn't appear in your patch. > >> + { "mr25h10" }, /* 1 Mib, 40 MHz */ >> + { "mr25h40" }, /* 4 Mib, 40 MHz */ >> + Also if you add new entries, I think you should update the "Supported chip names" section in Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt: "mr25h256" is already there. Best regards, Cyrille >> { }, >> }; >> MODULE_DEVICE_TABLE(spi, m25p_ids); >> >