* --pad option [NAND Flash: Pagesize 0x800; eraseblocksize=0x20000]
@ 2008-05-26 8:11 Manuel Sahm
0 siblings, 0 replies; only message in thread
From: Manuel Sahm @ 2008-05-26 8:11 UTC (permalink / raw)
To: linux-mtd
Hello
I have a huge problem concerning the mtd-tools:
I use makefs.jffs2 to create an image. I mount the Image and write to
it, add files. Then I umount it and mount it again:
"empty flash at [address] ends at [address]"
This is because:
mkfs.jffs2 or nandwrite uses a --pad option wich fills the image with 0xFF.
If I write to the image via Linux, a page is written completly with
appended 0x00 !!!!!
So what could I do - I must append 0x00 with the --pad option not 0xFF
Linux isn?t comkptable eith the mtd-utils at the moment....
Thank you for your help
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-05-26 8:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-26 8:11 --pad option [NAND Flash: Pagesize 0x800; eraseblocksize=0x20000] Manuel Sahm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox