From: Wolfgang Grandegger <wg@grandegger.com>
To: Linuxppc-dev@ozlabs.org
Cc: David Woodhouse <dwmw2@infradead.org>,
Anton Vorontsov <avorontsov@ru.mvista.com>,
linux-mtd@lists.infradead.org
Subject: Re: [PATCH v3] [NAND] driver extension to support NAND on TQM85xx modules
Date: Wed, 02 Jul 2008 10:18:16 +0200 [thread overview]
Message-ID: <486B39C8.10502@grandegger.com> (raw)
In-Reply-To: <484CE77C.70506@grandegger.com>
Hello,
I would like to ask for the status of the patch below and the related
ones. Any chance to get them in for 2.6.27.
TIA,
Wolfgang.
Wolfgang Grandegger wrote:
> This patch extends the FSL UPM NAND driver from Anton Vorontsov to
> support hardware which does not have the R/B pin of the NAND chip
> connected, like the TQM8548 module:
>
> - The OF_GPIO dependency has been removed from the Kconfig option
> because GPIO is not needed. The relevant gpio_* function are then
> stubbed out in <linux/gpio.h>.
>
> - It re-introduces the chip-delay property to define an appropriate
> maximum delay time (tR) required for read operations. The binding
> will be documented in a separate patch.
>
> Note: this patch is based on a patch from Anton Vorontsov aöready
> posted to this list:
>
> http://ozlabs.org/pipermail/linuxppc-dev/2008-April/055587.html.
> http://ozlabs.org/pipermail/linuxppc-dev/2008-May/057158.html
>
> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
> ---
> drivers/mtd/nand/Kconfig | 2 +-
> drivers/mtd/nand/fsl_upm.c | 17 +++++++++++++----
> 2 files changed, 14 insertions(+), 5 deletions(-)
>
> Index: linux-2.6-galak/drivers/mtd/nand/Kconfig
> ===================================================================
> --- linux-2.6-galak.orig/drivers/mtd/nand/Kconfig
> +++ linux-2.6-galak/drivers/mtd/nand/Kconfig
> @@ -380,7 +380,7 @@ config MTD_NAND_FSL_ELBC
>
> config MTD_NAND_FSL_UPM
> tristate "Support for NAND on Freescale UPM"
> - depends on MTD_NAND && OF_GPIO && (PPC_83xx || PPC_85xx)
> + depends on MTD_NAND && (PPC_83xx || PPC_85xx)
> select FSL_LBC
> help
> Enables support for NAND Flash chips wired onto Freescale PowerPC
> Index: linux-2.6-galak/drivers/mtd/nand/fsl_upm.c
> ===================================================================
> --- linux-2.6-galak.orig/drivers/mtd/nand/fsl_upm.c
> +++ linux-2.6-galak/drivers/mtd/nand/fsl_upm.c
> @@ -13,6 +13,7 @@
>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/delay.h>
> #include <linux/mtd/nand.h>
> #include <linux/mtd/nand_ecc.h>
> #include <linux/mtd/partitions.h>
> @@ -36,6 +37,7 @@ struct fsl_upm_nand {
> uint8_t upm_cmd_offset;
> void __iomem *io_base;
> int rnb_gpio;
> + int chip_delay;
> };
>
> #define to_fsl_upm_nand(mtd) container_of(mtd, struct fsl_upm_nand, mtd)
> @@ -58,10 +60,11 @@ static void fun_wait_rnb(struct fsl_upm_
> if (fun->rnb_gpio >= 0) {
> while (--cnt && !fun_chip_ready(&fun->mtd))
> cpu_relax();
> + if (!cnt)
> + dev_err(fun->dev, "tired waiting for RNB\n");
> + } else {
> + ndelay(100);
> }
> -
> - if (!cnt)
> - dev_err(fun->dev, "tired waiting for RNB\n");
> }
>
> static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
> @@ -129,7 +132,7 @@ static int __devinit fun_chip_init(struc
> fun->chip.IO_ADDR_R = fun->io_base;
> fun->chip.IO_ADDR_W = fun->io_base;
> fun->chip.cmd_ctrl = fun_cmd_ctrl;
> - fun->chip.chip_delay = 50;
> + fun->chip.chip_delay = fun->chip_delay;
> fun->chip.read_byte = fun_read_byte;
> fun->chip.read_buf = fun_read_buf;
> fun->chip.write_buf = fun_write_buf;
> @@ -233,6 +236,12 @@ static int __devinit fun_probe(struct of
> goto err2;
> }
>
> + prop = of_get_property(ofdev->node, "chip-delay", NULL);
> + if (prop)
> + fun->chip_delay = *prop;
> + else
> + fun->chip_delay = 50;
> +
> fun->io_base = devm_ioremap_nocache(&ofdev->dev, io_res.start,
> io_res.end - io_res.start + 1);
> if (!fun->io_base) {
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
>
next prev parent reply other threads:[~2008-07-02 8:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-09 8:19 [PATCH v3] [NAND] driver extension to support NAND on TQM85xx modules Wolfgang Grandegger
2008-07-02 8:18 ` Wolfgang Grandegger [this message]
2008-10-09 19:42 ` Wolfgang Grandegger
2008-10-09 22:10 ` Anton Vorontsov
2008-10-10 6:29 ` David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=486B39C8.10502@grandegger.com \
--to=wg@grandegger.com \
--cc=Linuxppc-dev@ozlabs.org \
--cc=avorontsov@ru.mvista.com \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox