From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from node3.inaccessnetworks.com ([212.205.200.118] helo=vm-dmz.priv.inaccessnetworks.com) by bombadil.infradead.org with esmtps (Exim 4.68 #1 (Red Hat Linux)) id 1LKVLW-0003XA-Qm for linux-mtd@lists.infradead.org; Wed, 07 Jan 2009 10:09:08 +0000 Received: from bender.priv.inaccessnetworks.com ([192.168.1.223]) by vm-dmz.priv.inaccessnetworks.com with esmtp (Exim 4.69) (envelope-from ) id 1LKV4R-0006kP-01 for linux-mtd@lists.infradead.org; Wed, 07 Jan 2009 11:51:27 +0200 Message-ID: <49647B16.50006@inaccessnetworks.com> Date: Wed, 07 Jan 2009 11:51:18 +0200 From: Kostas Nakos MIME-Version: 1.0 CC: linux-mtd@lists.infradead.org Subject: Re: [PATCH] ndfc driver References: <4950D8EA.7010905@inaccessnetworks.com> <20081223170040.4e58de3f@lappy.seanm.ca> <4958AD4E.8090608@inaccessnetworks.com> <20090105202340.7fd0f8c1@lappy.seanm.ca> In-Reply-To: <20090105202340.7fd0f8c1@lappy.seanm.ca> Content-Type: multipart/mixed; boundary="------------010203030203000507060509" List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , This is a multi-part message in MIME format. --------------010203030203000507060509 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sean MacLennan wrote: > That is where the NAND is on the warp. Could you post the complete dts? Of course; attached. This is the one I use to boot the 2.6.28 kernel (with the hackish ndfc patches). The only changes required while migrating the entire dts from 2.6.26 to .28 concern just the ndfc block and particularly the parameter names according to the new scheme. Thanks, Kostas --------------010203030203000507060509 Content-Type: text/plain; name="device.dts" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="device.dts" / { #address-cells = <2>; #size-cells = <1>; model = "amcc"; compatible = "amcc"; dcr-parent = <&/cpus/cpu@0>; aliases { ethernet0 = &EMAC0; ethernet1 = &EMAC1; serial0 = &UART0; serial1 = &UART1; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; model = "PowerPC,440EPx"; reg = <0>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ i-cache-line-size = <20>; d-cache-line-size = <20>; i-cache-size = <8000>; d-cache-size = <8000>; dcr-controller; dcr-access-method = "native"; }; }; memory { device_type = "memory"; reg = <0 0 0>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <0>; dcr-reg = <0c0 009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; }; UIC1: interrupt-controller1 { compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <1>; dcr-reg = <0d0 009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; interrupts = <1e 4 1f 4>; /* cascade */ interrupt-parent = <&UIC0>; }; UIC2: interrupt-controller2 { compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <2>; dcr-reg = <0e0 009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; interrupts = <1c 4 1d 4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440epx", "ibm,sdr-440ep"; dcr-reg = <00e 002>; }; CPR0: cpr { compatible = "ibm,cpr-440epx", "ibm,cpr-440ep"; dcr-reg = <00c 002>; }; plb { compatible = "ibm,plb-440epx", "ibm,plb4"; #address-cells = <2>; #size-cells = <1>; ranges; clock-frequency = <0>; /* Filled in by zImage */ SDRAM0: sdram { compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; dcr-reg = <010 2>; }; DMA0: dma { compatible = "ibm,dma-440epx", "ibm,dma-4xx"; dcr-reg = <100 027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440epx", "ibm,mcmal2"; dcr-reg = <180 62>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; interrupts = <0 1 2 3 4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; interrupt-map = ; interrupt-map-mask = ; }; ndfc@0,d0000000 { device_type = "nand"; compatible = "ibm,ndfc"; reg = <1 d0000000 2000>; bank-settings = <80002222>; ccr = <00001000>; #address-cells = <1>; #size-cells = <1>; nand { #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0 60000>; }; partition@1 { label = "uboot-env-1"; reg = <60000 4000>; }; partition@2 { label = "uboot-env-2"; reg = <64000 4000>; }; partition@3 { label = "device-tree"; reg = <68000 4000>; }; partition@4 { label = "bootfs"; reg = <6c000 340000>; }; partition@5 { label = "rootfs"; reg = <3ac000 0>; }; }; }; USB0: ehci@e0000300 { compatible = "ibm,usb-ehci-440epx", "usb-ehci"; interrupt-parent = <&UIC0>; interrupts = <1a 4>; reg = <0 e0000300 90 0 e0000390 70>; big-endian; }; POB0: opb { compatible = "ibm,opb-440epx", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; ranges = <00000000 1 00000000 80000000 80000000 1 80000000 80000000>; interrupt-parent = <&UIC1>; interrupts = <7 4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440epx", "ibm,ebc"; dcr-reg = <012 2>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ interrupts = <5 1>; interrupt-parent = <&UIC1>; }; UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; reg = ; virtual-reg = ; clock-frequency = <0>; /* Filled in by zImage */ current-speed = <1c200>; interrupt-parent = <&UIC0>; interrupts = <0 4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; reg = ; virtual-reg = ; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; interrupts = <1 4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440gpx", "ibm,iic"; reg = ; index = <0>; interrupt-parent = <&UIC0>; interrupts = <2 4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440gpx", "ibm,iic"; reg = ; index = <1>; interrupt-parent = <&UIC0>; interrupts = <7 4>; }; GPIO0: gpio@ef600b00 { compatible = "ibm,gpio-440ep"; reg = ; #gpio-cells = <2>; gpio-controller; }; GPIO1: gpio@ef600c00 { compatible = "ibm,gpio-440ep"; reg = ; #gpio-cells = <2>; gpio-controller; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440epx", "ibm,zmii"; reg = ; }; RGMII0: emac-rgmii@ef601000 { compatible = "ibm,rgmii-440epx", "ibm,rgmii"; reg = ; has-mdio; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; interrupts = <0 1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; interrupt-map = ; reg = ; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; phy-map = <00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; has-inverted-stacr-oc; has-new-stacr-staopc; }; EMAC1: ethernet@ef600f00 { device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; interrupts = <0 1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; interrupt-map = ; reg = ; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; phy-map = <00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; has-inverted-stacr-oc; has-new-stacr-staopc; }; LEDS0: led0 { compatible = "gpio-led"; label="led0"; gpios = <&GPIO1 1 0>; }; LEDS1: led1 { compatible = "gpio-led"; label="led1"; gpios = <&GPIO1 0 0>; }; LEDS2: led2 { compatible = "gpio-led"; label="led2"; gpios = <&GPIO0 1f 0>; }; LEDS3: led3 { compatible = "gpio-led"; label="led3"; gpios = <&GPIO0 1e 0>; }; LEDS4: led4 { compatible = "gpio-led"; label="led4"; gpios = <&GPIO0 1d 0>; }; BUTTON0: button { gpios = <&GPIO1 c 0 >; compatible = "gpio-button"; interrupt-parent = <&UIC0>; interrupts = <1b 2>; }; }; PCI0: pci@1ec000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; compatible = "ibm,plb440epx-pci", "ibm,plb-pci"; primary; reg = <1 eec00000 8 /* Config space access */ 1 eed00000 4 /* IACK */ 1 eed00000 4 /* Special cycle */ 1 ef400000 40>; /* Internal registers */ ranges = <02000000 0 80000000 1 80000000 0 40000000 01000000 0 00000000 1 e8000000 0 00010000 01000000 0 00000000 1 e8800000 0 03800000>; dma-ranges = <42000000 0 0 0 0 0 80000000>; interrupt-map-mask = <2800 0 0 0>; interrupt-map = < 2000 0 0 0 &UIC2 3 8 2800 0 0 0 &UIC2 4 8 >; }; }; chosen { linux,stdout-path = "/plb/opb/serial@ef600300"; bootargs = "console=ttyS0,115200 root=1f05 rootfstype=jffs2 getty_cons=ttyS0"; }; }; --------------010203030203000507060509--