From: Teun Grinwis <teun@adesys.nl>
To: Mtd List <linux-mtd@lists.infradead.org>
Subject: flash section set to 0x0 on jffs2 filesystem
Date: Thu, 13 Aug 2009 09:13:35 +0200 [thread overview]
Message-ID: <4A83BD1F.6070806@adesys.nl> (raw)
Hello,
I use Freescale Coldfire M5208, uClinux 2.6.21, jffs2 file system.
Flash chip: spansion S29GL064A
We store an executable (z-flat) on this file system. After a certain time of successful usage, the exec
will not startup anymore and uclinux comes with following error
INFMT_FLAT: reloc outside program 0x6c006800 (0 - 0x54fa14/0x4b0b40), killing OIP-1.2.4!
OIP-1.2.4[62] killed because of sig - 11
We upload the exec, and did a hex diff with the original bin file. Discovered that a region (section) in the faulty exec. file has changed to the value 0x00.
My concern, is this an error in the Flash chip or jffs2 file system??
Question:
Are there tools/howto to check a jffs2 partition.
Suggestions are welcome. Thanks in advance for your info.
--
Met vriendelijke groeten / With kind regards,
Teun Grinwis
next reply other threads:[~2009-08-13 7:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-13 7:13 Teun Grinwis [this message]
2009-08-13 7:46 ` flash section set to 0x0 on jffs2 filesystem Norbert van Bolhuis
2009-08-14 6:31 ` Teun Grinwis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A83BD1F.6070806@adesys.nl \
--to=teun@adesys.nl \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox