From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp-vbr3.xs4all.nl ([194.109.24.23]) by bombadil.infradead.org with esmtp (Exim 4.69 #1 (Red Hat Linux)) id 1MbqKL-0002pw-7z for linux-mtd@lists.infradead.org; Fri, 14 Aug 2009 06:31:53 +0000 Message-ID: <4A8504D1.1050506@adesys.nl> Date: Fri, 14 Aug 2009 08:31:45 +0200 From: Teun Grinwis MIME-Version: 1.0 To: Norbert van Bolhuis Subject: Re: flash section set to 0x0 on jffs2 filesystem References: <4A83BD1F.6070806@adesys.nl> <4A83C4D5.8080704@aimvalley.nl> In-Reply-To: <4A83C4D5.8080704@aimvalley.nl> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Mtd List List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi Norbert, Thanks for your tips. Norbert van Bolhuis wrote: > Hallo Teun, > > Is there no kernel/jffs2 error message or whatsoever ? > I would expect a node CRC error (maybe if you unount and mount jffs2 > fs again). There are no errors with mounting. > > Use jffs2dump to check your jffs2 partition, it's available What does jffs2dump do ? only dump data, or also check the jffs2 admin consistancy?? I have already uploaded my filesystem to Linux Host. jffs2dump has compile errors on my system (missing uuid.h). > in the mtd-utils git repository, see > git://git.infradead.org/mtd-utils.git > > It's difficult to "reconstruct" the original exec. file though from > the jffs2dump info since jffs2 compresses data. > > Groetjes, > Norbert. > > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ -- Groeten / With kind regards, Teun Grinwis