From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtpin1.mailsecure.in ([121.241.224.1]) by bombadil.infradead.org with esmtp (Exim 4.69 #1 (Red Hat Linux)) id 1Mm41A-00056j-5P for linux-mtd@lists.infradead.org; Fri, 11 Sep 2009 11:10:20 +0000 Message-ID: <4AAA3088.5000905@tataelxsi.co.in> Date: Fri, 11 Sep 2009 16:42:08 +0530 From: Rahanesh MIME-Version: 1.0 To: Tadimarri Sarath Babu Subject: Re: Problem with flash _info References: <4AAA230D.80603@tataelxsi.co.in> In-Reply-To: Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="iso-8859-1"; format="flowed" Cc: linux-mtd@lists.infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hai Sarath Thank you so much Rahanesh Tadimarri Sarath Babu wrote: > ----- Original Message -----=20 > From: "Rahanesh" > To: > Sent: Friday, September 11, 2009 3:44 PM > Subject: Problem with flash _info > > > =20 >> Hi all, >> >> I am using flash_info command on board. i have 4 mtd devices. /dev/mtd0,= /dev/mtd1, /dev/mtd2,=20 >> /dev/mtd3. >> >> how do i find the size of each mtd device.? I used flash_info. >> =20 > > flash_info has some problem in mtd-utils. I also observed the same. > You can try "mtd_debug" to get the size of the mtd device. > $mtd_debug info /dev/mtd2 > > =20 >> But when i used that i got the following message. "Device /dev/mtd2 has = 0 erase regions". It is=20 >> same for all the mtd devices. >> >> What might be the problem? >> >> Please help >> >> Rahanesh >> . >> >> >> >> ______________________________________________________ >> Linux MTD discussion mailing list >> http://lists.infradead.org/mailman/listinfo/linux-mtd/=20 >> =20 > > > > =20