From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from dcn237-231.dcn.davis.ca.us ([168.150.237.231] helo=rusty.jkmicro.com) by bombadil.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1OiZme-0007oj-5R for linux-mtd@lists.infradead.org; Mon, 09 Aug 2010 21:21:24 +0000 Received: from [10.10.1.107] (dcn237-230.dcn.davis.ca.us [168.150.237.230]) by rusty.jkmicro.com (8.12.8/8.12.8) with ESMTP id o79KTf99028428 for ; Mon, 9 Aug 2010 13:29:41 -0700 Message-ID: <4C607150.6040806@jkmicro.com> Date: Mon, 09 Aug 2010 14:21:20 -0700 From: Adam Yergovich MIME-Version: 1.0 To: linux-mtd@lists.infradead.org Subject: Re: buffer write error (status 0x90) References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Jon Ringle wrote: > We are replacing the discontinued Intel StrataFlash P30 flash > JS28F256P30T95 with the Numonyx P30-65nm flash JS28F256P30TF on our > boards and have a few boards with sample chips. During some testing > one of the boards with the Numonyx flash chip is now reporting the > following buffer write error (status 0x90) on every boot: I have tested swapping the lower density part and haven't had any problems with MTD or otherwise. I suspect you've just got a bad part or something else happened. -Adam -- Adam Yergovich Engineer JK Microsystems 1403 Fifth St. Suite D Davis, CA 95616 Tel:(530) 297-6073