From: Sergei Shtylyov <sshtylyov@mvista.com>
To: Savinay Dharmappa <savinay.dharmappa@ti.com>
Cc: amakarov@ru.mvista.com,
davinci-linux-open-source@linux.davincidsp.com,
linux-mtd@lists.infradead.org,
'David Griego' <dgriego@mvista.com>
Subject: Re: [PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x
Date: Fri, 12 Nov 2010 14:48:35 +0300 [thread overview]
Message-ID: <4CDD2993.9040005@mvista.com> (raw)
In-Reply-To: <000901cb8220$edf40df0$c9dc29d0$@dharmappa@ti.com>
Hello.
On 12-11-2010 7:20, Savinay Dharmappa wrote:
>>> OMAP-L137/AM17x has limited number of dedicated EMIFA
>>> address pins, enough to interface directly to an SDRAM.
>>> If a device such as an asynchronous flash needs to be
>>> attached to the EMIFA, then either GPIO pins or a chip
>>> select may be used to control the flash device's upper
>>> address lines.
>>> This patch adds support for the NOR flash on the OMAP-L137/
>>> AM17x user interface daughter board using the latch-addr-flash
>>> MTD mapping driver which allows flashes to be partially
>>> physically addressed. The upper address lines are set by
>>> a board specific code which is a separate patch.
>>> Signed-off-by: David Griego<dgriego@mvista.com>
>> It's again not clear why you've dropped my and Alexei's signoff. Did
> we
>> request you to do so?
>
> I had sent this series to all MV folks to get their signoff but nobody
> replied.
Why get our signoffs again if they were on the original patches that you used?
> If you are OK with the updated version of this patch, which I'll be
> submitting
> shortly, please add your signoff.
Well, OK...
> Regards,
> Savinay.
WBR, Sergei
next prev parent reply other threads:[~2010-11-12 11:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-11 7:55 [PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x Savinay Dharmappa
2010-11-11 18:18 ` Sergei Shtylyov
2010-11-12 4:20 ` Savinay Dharmappa
2010-11-12 11:48 ` Sergei Shtylyov [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-10-07 11:31 Savinay Dharmappa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CDD2993.9040005@mvista.com \
--to=sshtylyov@mvista.com \
--cc=amakarov@ru.mvista.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=dgriego@mvista.com \
--cc=linux-mtd@lists.infradead.org \
--cc=savinay.dharmappa@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).