[PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x

[PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x

[Savinay Dharmappa]

From: David Griego <dgriego@mvista.com>

OMAP-L137/AM17x has limited number of dedicated EMIFA
address pins, enough to interface directly to an SDRAM.
If a device such as an asynchronous flash needs to be
attached to the EMIFA, then either GPIO pins or a chip
select may be used to control the flash device's upper
address lines.

This patch adds support for the NOR flash on the OMAP-L137/
AM17x user interface daughter board using the latch-addr-flash
MTD mapping driver which allows flashes to be partially
physically addressed. The upper address lines are set by
a board specific code which is a separate patch.

Signed-off-by: Aleksey Makarov <amakarov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@ti.com>
---
 drivers/mtd/maps/Kconfig             |    9 +
 drivers/mtd/maps/Makefile            |    1 +
 drivers/mtd/maps/latch-addr-flash.c  |  271 ++++++++++++++++++++++++++++++++++
 include/linux/mtd/latch-addr-flash.h |   29 ++++
 4 files changed, 310 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/maps/latch-addr-flash.c
 create mode 100644 include/linux/mtd/latch-addr-flash.h

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 701d942..b794ea2 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -543,4 +543,13 @@ config MTD_PISMO
 
 	  When built as a module, it will be called pismo.ko
 
+config MTD_LATCH_ADDR
+        tristate "Latch-assisted Flash Chip Support"
+        depends on MTD_COMPLEX_MAPPINGS
+        help
+          Map driver which allows flashes to be partially physically addressed
+          and have the upper address lines set by a board specific code.
+
+          If compiled as a module, it will be called latch-addr-flash.
+
 endmenu
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index f216bb5..35c3573 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,3 +58,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
 obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
 obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
 obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
+obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c
new file mode 100644
index 0000000..e3a7f91
--- /dev/null
+++ b/drivers/mtd/maps/latch-addr-flash.c
@@ -0,0 +1,271 @@
+/*
+ * Interface for NOR flash driver whose high address lines are latched
+ *
+ * Copyright 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright 2005-2008 Analog Devices Inc.
+ * Coyright (C) 2008 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/latch-addr-flash.h>
+#include <linux/slab.h>
+
+#define DRIVER_NAME "latch-addr-flash"
+
+struct latch_addr_flash_info {
+	struct mtd_info		*mtd;
+	struct map_info		map;
+	struct resource		*res;
+
+	void			(*set_window)(unsigned long offset, void *data);
+	void			*data;
+
+	/* cache; could be found out of res */
+	unsigned long		win_mask;
+
+	int			nr_parts;
+	struct mtd_partition	*parts;
+
+	spinlock_t		lock;
+};
+
+static map_word lf_read(struct map_info *map, unsigned long ofs)
+{
+	struct latch_addr_flash_info *info;
+	map_word datum;
+
+	info = (struct latch_addr_flash_info *)map->map_priv_1;
+
+	spin_lock(&info->lock);
+
+	info->set_window(ofs, info->data);
+	datum = inline_map_read(map, info->win_mask & ofs);
+
+	spin_unlock(&info->lock);
+
+	return datum;
+}
+
+static void lf_write(struct map_info *map, map_word datum, unsigned long ofs)
+{
+	struct latch_addr_flash_info *info;
+
+	info = (struct latch_addr_flash_info *)map->map_priv_1;
+
+	spin_lock(&info->lock);
+
+	info->set_window(ofs, info->data);
+	inline_map_write(map, datum, info->win_mask & ofs);
+
+	spin_unlock(&info->lock);
+}
+
+static void lf_copy_from(struct map_info *map, void *to,
+		unsigned long from, ssize_t len)
+{
+	struct latch_addr_flash_info *info =
+		(struct latch_addr_flash_info *) map->map_priv_1;
+	unsigned n;
+
+	while (len > 0) {
+		n = info->win_mask + 1 - (from & info->win_mask);
+		if (n > len)
+			n = len;
+
+		spin_lock(&info->lock);
+
+		info->set_window(from, info->data);
+		memcpy_fromio(to, map->virt + (from & info->win_mask), n);
+
+		spin_unlock(&info->lock);
+
+		to += n;
+		from += n;
+		len -= n;
+	}
+}
+
+static const char *rom_probe_types[] = { "cfi_probe", NULL };
+
+static const char *part_probe_types[] = { "cmdlinepart", NULL };
+
+static int latch_addr_flash_remove(struct platform_device *dev)
+{
+	struct latch_addr_flash_info *info;
+	struct latch_addr_flash_data *latch_addr_data;
+
+	info = platform_get_drvdata(dev);
+	if (info == NULL)
+		return 0;
+	platform_set_drvdata(dev, NULL);
+
+	latch_addr_data = dev->dev.platform_data;
+
+	if (info->mtd != NULL) {
+		if (mtd_has_partitions()) {
+			if (info->nr_parts) {
+				del_mtd_partitions(info->mtd);
+				kfree(info->parts);
+			} else if (latch_addr_data->nr_parts) {
+				del_mtd_partitions(info->mtd);
+			} else {
+				del_mtd_device(info->mtd);
+			}
+		} else {
+			del_mtd_device(info->mtd);
+		}
+		map_destroy(info->mtd);
+	}
+
+	if (info->map.virt != NULL)
+		iounmap(info->map.virt);
+
+	if (info->res != NULL)
+		release_mem_region(info->res->start, resource_size(info->res));
+
+	kfree(info);
+
+	if (latch_addr_data->done)
+		latch_addr_data->done(latch_addr_data->data);
+
+	return 0;
+}
+
+static int __devinit latch_addr_flash_probe(struct platform_device *dev)
+{
+	struct latch_addr_flash_data *latch_addr_data;
+	struct latch_addr_flash_info *info;
+	resource_size_t win_base = dev->resource->start;
+	resource_size_t win_size = resource_size(dev->resource);
+	const char **probe_type;
+	int chipsel;
+	int err;
+
+	latch_addr_data = dev->dev.platform_data;
+	if (latch_addr_data == NULL)
+		return -ENODEV;
+
+	pr_notice("latch-addr platform flash device: %#llx byte "
+		  "window at %#.8llx\n",
+		  (unsigned long long)win_size, (unsigned long long)win_base);
+
+	chipsel = dev->id;
+
+	if (latch_addr_data->init) {
+		err = latch_addr_data->init(latch_addr_data->data, chipsel);
+		if (err != 0)
+			return err;
+	}
+
+	info = kzalloc(sizeof(struct latch_addr_flash_info), GFP_KERNEL);
+	if (info == NULL) {
+		err = -ENOMEM;
+		goto done;
+	}
+
+	platform_set_drvdata(dev, info);
+
+	info->res = request_mem_region(win_base, win_size, DRIVER_NAME);
+	if (info->res == NULL) {
+		dev_err(&dev->dev, "Could not reserve memory region\n");
+		err = -EBUSY;
+		goto free_info;
+	}
+
+	info->map.name		= DRIVER_NAME;
+	info->map.size		= latch_addr_data->size;
+	info->map.bankwidth	= latch_addr_data->width;
+
+	info->map.phys		= NO_XIP;
+	info->map.virt		= ioremap(win_base, win_size);
+	if (!info->map.virt) {
+		err = -ENOMEM;
+		goto free_res;
+	}
+
+	info->map.map_priv_1	= (unsigned long)info;
+
+	info->map.read		= lf_read;
+	info->map.copy_from	= lf_copy_from;
+	info->map.write		= lf_write;
+	info->set_window	= latch_addr_data->set_window;
+	info->data		= latch_addr_data->data;
+	info->win_mask		= win_size - 1;
+
+	spin_lock_init(&info->lock);
+
+	for (probe_type = rom_probe_types; !info->mtd && *probe_type;
+		probe_type++)
+		info->mtd = do_map_probe(*probe_type, &info->map);
+
+	if (info->mtd == NULL) {
+		dev_err(&dev->dev, "map_probe failed\n");
+		err = -ENODEV;
+		goto iounmap;
+	}
+	info->mtd->owner = THIS_MODULE;
+
+	if (mtd_has_partitions()) {
+
+		err = parse_mtd_partitions(info->mtd, part_probe_types,
+					   &info->parts, 0);
+		if (err > 0) {
+			add_mtd_partitions(info->mtd, info->parts, err);
+			return 0;
+		}
+		if (latch_addr_data->nr_parts) {
+			pr_notice("Using latch-addr-flash partition information\n");
+			add_mtd_partitions(info->mtd, latch_addr_data->parts,
+					latch_addr_data->nr_parts);
+			return 0;
+		}
+	}
+	add_mtd_device(info->mtd);
+	return 0;
+
+iounmap:
+	iounmap(info->map.virt);
+free_res:
+	release_mem_region(info->res->start, resource_size(info->res));
+free_info:
+	kfree(info);
+done:
+	if (latch_addr_data->done)
+		latch_addr_data->done(latch_addr_data->data);
+	return err;
+}
+
+static struct platform_driver latch_addr_flash_driver = {
+	.probe		= latch_addr_flash_probe,
+	.remove		= __devexit_p(latch_addr_flash_remove),
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init latch_addr_flash_init(void)
+{
+	return platform_driver_register(&latch_addr_flash_driver);
+}
+module_init(latch_addr_flash_init);
+
+static void __exit latch_addr_flash_exit(void)
+{
+	platform_driver_unregister(&latch_addr_flash_driver);
+}
+module_exit(latch_addr_flash_exit);
+
+MODULE_AUTHOR("David Griego <dgriego@mvista.com>");
+MODULE_DESCRIPTION("MTD map driver for flashes addressed physically with upper "
+		"address lines being set board specifically");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mtd/latch-addr-flash.h b/include/linux/mtd/latch-addr-flash.h
new file mode 100644
index 0000000..c77e7c9
--- /dev/null
+++ b/include/linux/mtd/latch-addr-flash.h
@@ -0,0 +1,29 @@
+/*
+ * Interface for NOR flash driver whose high address lines are latched
+ *
+ * Copyright (C) 2008 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed underthe terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __LATCH_ADDR_FLASH__
+#define __LATCH_ADDR_FLASH__
+
+struct map_info;
+struct mtd_partition;
+
+struct latch_addr_flash_data {
+	unsigned int		width;
+	unsigned int		size;
+
+	int			(*init)(void *data, int cs);
+	void			(*done)(void *data);
+	void			(*set_window)(unsigned long offset, void *data);
+	void			*data;
+
+	unsigned int		nr_parts;
+	struct mtd_partition	*parts;
+};
+
+#endif
-- 
1.5.6

[PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x

[Savinay Dharmappa]

From: David Griego <dgriego@mvista.com>

OMAP-L137/AM17x has limited number of dedicated EMIFA
address pins, enough to interface directly to an SDRAM.
If a device such as an asynchronous flash needs to be
attached to the EMIFA, then either GPIO pins or a chip
select may be used to control the flash device's upper
address lines.

This patch adds support for the NOR flash on the OMAP-L137/
AM17x user interface daughter board using the latch-addr-flash
MTD mapping driver which allows flashes to be partially
physically addressed. The upper address lines are set by
a board specific code which is a separate patch.

Signed-off-by: David Griego <dgriego@mvista.com>
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@ti.com>
---
 drivers/mtd/maps/Kconfig             |    9 +
 drivers/mtd/maps/Makefile            |    1 +
 drivers/mtd/maps/latch-addr-flash.c  |  271 ++++++++++++++++++++++++++++++++++
 include/linux/mtd/latch-addr-flash.h |   29 ++++
 4 files changed, 310 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/maps/latch-addr-flash.c
 create mode 100644 include/linux/mtd/latch-addr-flash.h

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 701d942..b794ea2 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -543,4 +543,13 @@ config MTD_PISMO
 
 	  When built as a module, it will be called pismo.ko
 
+config MTD_LATCH_ADDR
+        tristate "Latch-assisted Flash Chip Support"
+        depends on MTD_COMPLEX_MAPPINGS
+        help
+          Map driver which allows flashes to be partially physically addressed
+          and have the upper address lines set by a board specific code.
+
+          If compiled as a module, it will be called latch-addr-flash.
+
 endmenu
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index f216bb5..35c3573 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,3 +58,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
 obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
 obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
 obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
+obj-$(CONFIG_MTD_LATCH_ADDR)	+= latch-addr-flash.o
diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c
new file mode 100644
index 0000000..e3a7f91
--- /dev/null
+++ b/drivers/mtd/maps/latch-addr-flash.c
@@ -0,0 +1,271 @@
+/*
+ * Interface for NOR flash driver whose high address lines are latched
+ *
+ * Copyright 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright 2005-2008 Analog Devices Inc.
+ * Coyright (C) 2008 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/latch-addr-flash.h>
+#include <linux/slab.h>
+
+#define DRIVER_NAME "latch-addr-flash"
+
+struct latch_addr_flash_info {
+	struct mtd_info		*mtd;
+	struct map_info		map;
+	struct resource		*res;
+
+	void			(*set_window)(unsigned long offset, void *data);
+	void			*data;
+
+	/* cache; could be found out of res */
+	unsigned long		win_mask;
+
+	int			nr_parts;
+	struct mtd_partition	*parts;
+
+	spinlock_t		lock;
+};
+
+static map_word lf_read(struct map_info *map, unsigned long ofs)
+{
+	struct latch_addr_flash_info *info;
+	map_word datum;
+
+	info = (struct latch_addr_flash_info *)map->map_priv_1;
+
+	spin_lock(&info->lock);
+
+	info->set_window(ofs, info->data);
+	datum = inline_map_read(map, info->win_mask & ofs);
+
+	spin_unlock(&info->lock);
+
+	return datum;
+}
+
+static void lf_write(struct map_info *map, map_word datum, unsigned long ofs)
+{
+	struct latch_addr_flash_info *info;
+
+	info = (struct latch_addr_flash_info *)map->map_priv_1;
+
+	spin_lock(&info->lock);
+
+	info->set_window(ofs, info->data);
+	inline_map_write(map, datum, info->win_mask & ofs);
+
+	spin_unlock(&info->lock);
+}
+
+static void lf_copy_from(struct map_info *map, void *to,
+		unsigned long from, ssize_t len)
+{
+	struct latch_addr_flash_info *info =
+		(struct latch_addr_flash_info *) map->map_priv_1;
+	unsigned n;
+
+	while (len > 0) {
+		n = info->win_mask + 1 - (from & info->win_mask);
+		if (n > len)
+			n = len;
+
+		spin_lock(&info->lock);
+
+		info->set_window(from, info->data);
+		memcpy_fromio(to, map->virt + (from & info->win_mask), n);
+
+		spin_unlock(&info->lock);
+
+		to += n;
+		from += n;
+		len -= n;
+	}
+}
+
+static const char *rom_probe_types[] = { "cfi_probe", NULL };
+
+static const char *part_probe_types[] = { "cmdlinepart", NULL };
+
+static int latch_addr_flash_remove(struct platform_device *dev)
+{
+	struct latch_addr_flash_info *info;
+	struct latch_addr_flash_data *latch_addr_data;
+
+	info = platform_get_drvdata(dev);
+	if (info == NULL)
+		return 0;
+	platform_set_drvdata(dev, NULL);
+
+	latch_addr_data = dev->dev.platform_data;
+
+	if (info->mtd != NULL) {
+		if (mtd_has_partitions()) {
+			if (info->nr_parts) {
+				del_mtd_partitions(info->mtd);
+				kfree(info->parts);
+			} else if (latch_addr_data->nr_parts) {
+				del_mtd_partitions(info->mtd);
+			} else {
+				del_mtd_device(info->mtd);
+			}
+		} else {
+			del_mtd_device(info->mtd);
+		}
+		map_destroy(info->mtd);
+	}
+
+	if (info->map.virt != NULL)
+		iounmap(info->map.virt);
+
+	if (info->res != NULL)
+		release_mem_region(info->res->start, resource_size(info->res));
+
+	kfree(info);
+
+	if (latch_addr_data->done)
+		latch_addr_data->done(latch_addr_data->data);
+
+	return 0;
+}
+
+static int __devinit latch_addr_flash_probe(struct platform_device *dev)
+{
+	struct latch_addr_flash_data *latch_addr_data;
+	struct latch_addr_flash_info *info;
+	resource_size_t win_base = dev->resource->start;
+	resource_size_t win_size = resource_size(dev->resource);
+	const char **probe_type;
+	int chipsel;
+	int err;
+
+	latch_addr_data = dev->dev.platform_data;
+	if (latch_addr_data == NULL)
+		return -ENODEV;
+
+	pr_notice("latch-addr platform flash device: %#llx byte "
+		  "window at %#.8llx\n",
+		  (unsigned long long)win_size, (unsigned long long)win_base);
+
+	chipsel = dev->id;
+
+	if (latch_addr_data->init) {
+		err = latch_addr_data->init(latch_addr_data->data, chipsel);
+		if (err != 0)
+			return err;
+	}
+
+	info = kzalloc(sizeof(struct latch_addr_flash_info), GFP_KERNEL);
+	if (info == NULL) {
+		err = -ENOMEM;
+		goto done;
+	}
+
+	platform_set_drvdata(dev, info);
+
+	info->res = request_mem_region(win_base, win_size, DRIVER_NAME);
+	if (info->res == NULL) {
+		dev_err(&dev->dev, "Could not reserve memory region\n");
+		err = -EBUSY;
+		goto free_info;
+	}
+
+	info->map.name		= DRIVER_NAME;
+	info->map.size		= latch_addr_data->size;
+	info->map.bankwidth	= latch_addr_data->width;
+
+	info->map.phys		= NO_XIP;
+	info->map.virt		= ioremap(win_base, win_size);
+	if (!info->map.virt) {
+		err = -ENOMEM;
+		goto free_res;
+	}
+
+	info->map.map_priv_1	= (unsigned long)info;
+
+	info->map.read		= lf_read;
+	info->map.copy_from	= lf_copy_from;
+	info->map.write		= lf_write;
+	info->set_window	= latch_addr_data->set_window;
+	info->data		= latch_addr_data->data;
+	info->win_mask		= win_size - 1;
+
+	spin_lock_init(&info->lock);
+
+	for (probe_type = rom_probe_types; !info->mtd && *probe_type;
+		probe_type++)
+		info->mtd = do_map_probe(*probe_type, &info->map);
+
+	if (info->mtd == NULL) {
+		dev_err(&dev->dev, "map_probe failed\n");
+		err = -ENODEV;
+		goto iounmap;
+	}
+	info->mtd->owner = THIS_MODULE;
+
+	if (mtd_has_partitions()) {
+
+		err = parse_mtd_partitions(info->mtd, part_probe_types,
+					   &info->parts, 0);
+		if (err > 0) {
+			add_mtd_partitions(info->mtd, info->parts, err);
+			return 0;
+		}
+		if (latch_addr_data->nr_parts) {
+			pr_notice("Using latch-addr-flash partition information\n");
+			add_mtd_partitions(info->mtd, latch_addr_data->parts,
+					latch_addr_data->nr_parts);
+			return 0;
+		}
+	}
+	add_mtd_device(info->mtd);
+	return 0;
+
+iounmap:
+	iounmap(info->map.virt);
+free_res:
+	release_mem_region(info->res->start, resource_size(info->res));
+free_info:
+	kfree(info);
+done:
+	if (latch_addr_data->done)
+		latch_addr_data->done(latch_addr_data->data);
+	return err;
+}
+
+static struct platform_driver latch_addr_flash_driver = {
+	.probe		= latch_addr_flash_probe,
+	.remove		= __devexit_p(latch_addr_flash_remove),
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init latch_addr_flash_init(void)
+{
+	return platform_driver_register(&latch_addr_flash_driver);
+}
+module_init(latch_addr_flash_init);
+
+static void __exit latch_addr_flash_exit(void)
+{
+	platform_driver_unregister(&latch_addr_flash_driver);
+}
+module_exit(latch_addr_flash_exit);
+
+MODULE_AUTHOR("David Griego <dgriego@mvista.com>");
+MODULE_DESCRIPTION("MTD map driver for flashes addressed physically with upper "
+		"address lines being set board specifically");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mtd/latch-addr-flash.h b/include/linux/mtd/latch-addr-flash.h
new file mode 100644
index 0000000..c77e7c9
--- /dev/null
+++ b/include/linux/mtd/latch-addr-flash.h
@@ -0,0 +1,29 @@
+/*
+ * Interface for NOR flash driver whose high address lines are latched
+ *
+ * Copyright (C) 2008 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed underthe terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __LATCH_ADDR_FLASH__
+#define __LATCH_ADDR_FLASH__
+
+struct map_info;
+struct mtd_partition;
+
+struct latch_addr_flash_data {
+	unsigned int		width;
+	unsigned int		size;
+
+	int			(*init)(void *data, int cs);
+	void			(*done)(void *data);
+	void			(*set_window)(unsigned long offset, void *data);
+	void			*data;
+
+	unsigned int		nr_parts;
+	struct mtd_partition	*parts;
+};
+
+#endif
-- 
1.5.6

Re: [PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x

[Sergei Shtylyov]

Hello.

Savinay Dharmappa wrote:

> From: David Griego <dgriego@mvista.com>

> OMAP-L137/AM17x has limited number of dedicated EMIFA
> address pins, enough to interface directly to an SDRAM.
> If a device such as an asynchronous flash needs to be
> attached to the EMIFA, then either GPIO pins or a chip
> select may be used to control the flash device's upper
> address lines.
> 
> This patch adds support for the NOR flash on the OMAP-L137/
> AM17x user interface daughter board using the latch-addr-flash
> MTD mapping driver which allows flashes to be partially
> physically addressed. The upper address lines are set by
> a board specific code which is a separate patch.

> Signed-off-by: David Griego <dgriego@mvista.com>

    It's again not clear why you've dropped my and Alexei's signoff. Did we 
request you to do so?

> Signed-off-by: Savinay Dharmappa <savinay.dharmappa@ti.com>

WBR, Sergei

RE: [PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x

[Savinay Dharmappa]

On Thu, Nov 11, 2010 at 23:48:55, Sergei Shtylyov wrote:
> Hello.
> 
> Savinay Dharmappa wrote:
> 
> > From: David Griego <dgriego@mvista.com>
> 
> > OMAP-L137/AM17x has limited number of dedicated EMIFA
> > address pins, enough to interface directly to an SDRAM.
> > If a device such as an asynchronous flash needs to be
> > attached to the EMIFA, then either GPIO pins or a chip
> > select may be used to control the flash device's upper
> > address lines.
> > 
> > This patch adds support for the NOR flash on the OMAP-L137/
> > AM17x user interface daughter board using the latch-addr-flash
> > MTD mapping driver which allows flashes to be partially
> > physically addressed. The upper address lines are set by
> > a board specific code which is a separate patch.
> 
> > Signed-off-by: David Griego <dgriego@mvista.com>
> 
>     It's again not clear why you've dropped my and Alexei's signoff. Did
we 
> request you to do so?

I had sent this series to all MV folks to get their signoff but nobody
replied.
If you are OK with the updated version of this patch, which I'll be
submitting
shortly, please add your signoff.

Regards,
Savinay.

Re: [PATCH 1/2] mtd: NOR flash driver for OMAP-L137/AM17x

[Sergei Shtylyov]

Hello.

On 12-11-2010 7:20, Savinay Dharmappa wrote:

>>> OMAP-L137/AM17x has limited number of dedicated EMIFA
>>> address pins, enough to interface directly to an SDRAM.
>>> If a device such as an asynchronous flash needs to be
>>> attached to the EMIFA, then either GPIO pins or a chip
>>> select may be used to control the flash device's upper
>>> address lines.

>>> This patch adds support for the NOR flash on the OMAP-L137/
>>> AM17x user interface daughter board using the latch-addr-flash
>>> MTD mapping driver which allows flashes to be partially
>>> physically addressed. The upper address lines are set by
>>> a board specific code which is a separate patch.

>>> Signed-off-by: David Griego<dgriego@mvista.com>

>>      It's again not clear why you've dropped my and Alexei's signoff. Did
> we
>> request you to do so?
>
> I had sent this series to all MV folks to get their signoff but nobody
> replied.

    Why get our signoffs again if they were on the original patches that you used?

> If you are OK with the updated version of this patch, which I'll be
> submitting
> shortly, please add your signoff.

    Well, OK...

> Regards,
> Savinay.

WBR, Sergei