From: "Anders Mørk-Pedersen" <amp@frogne.dk>
To: <linux-mtd@lists.infradead.org>
Subject: pxa2xx-flash.c
Date: Mon, 05 Dec 2011 08:05:45 +0100 [thread overview]
Message-ID: <4EDC7B590200008E00014334@mail.frogne.dk> (raw)
[-- Attachment #1: Type: text/plain, Size: 1099 bytes --]
I have done as you instructed and created a patch for "git am" and
attached it to this mail.
I've also sent a copy to: Dmitry Eremin-Solenikov
<dbaryshkov@gmail.com>
Best regards
Anders
On Fri, 2011-12-02 at 15:40 +0100, Anders Mørk-Pedersen wrote:
> Hi,
>
> I've noticed a problem with a patch for the pxa2xx-flash.c map, which
has been committed to the nextline kernel (currently 3.2-rc3)
>
> The problem is that hardcoded mtd partitions are no longer probed -
and that breaks a lot of board support modules.
>
> The patch is described as
> "mtd: pxa2xx-flash.c: use mtd_device_parse_register"
>
> and can be seen here:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=6fcdc92fce81eadcee262a7a66bf3207314fab87
>
> I have created a small patch to address this.
Looks OK, but could you please send a patch suitable for 'git am'? So
that I save your mail and give it to git-am and end up with a commit
which has you as the author, and a nice commit message. Also, please,
CC
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com
Thanks!
--
Best Regards,
Artem Bityutskiy
[-- Attachment #2: 0001-Enables-the-mtd-driver-to-use-hardcoded-partitions.patch --]
[-- Type: text/plain, Size: 1708 bytes --]
>From 4e2507e892c8ccb3726a549e52ffcafe7c477fae Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Anders=20M=C3=B8rk-Pedersen?= <amp@frogne.dk>
Date: Mon, 5 Dec 2011 07:42:07 +0100
Subject: [PATCH] Enables the mtd-driver to use hardcoded partitions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
After the pxa2xx-flash driver was updated to use the mtd_device_parse_register interface (6fcdc92fce81eadce...), it has not been possible to define the partition layout in the board support package - as is often seen done. This breaks support for many pxa2xx-boards.
Signed-off-by: Anders Mørk-Pedersen <amp@frogne.dk>
---
drivers/mtd/maps/pxa2xx-flash.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 411a17d..37709a6 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -54,6 +54,7 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
struct flash_platform_data *flash = pdev->dev.platform_data;
struct pxa2xx_flash_info *info;
struct resource *res;
+ struct mtd_part_parser_data ppdata;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -98,7 +99,10 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
}
info->mtd->owner = THIS_MODULE;
- mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
+ ppdata.of_node = pdev->dev.of_node;
+ mtd_device_parse_register(info->mtd, probes, &ppdata,
+ flash ? flash->parts : NULL,
+ flash ? flash->nr_parts : 0);
platform_set_drvdata(pdev, info);
return 0;
--
1.7.1
next reply other threads:[~2011-12-05 7:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-05 7:05 Anders Mørk-Pedersen [this message]
2011-12-06 12:07 ` pxa2xx-flash.c Artem Bityutskiy
-- strict thread matches above, loose matches on Subject: below --
2011-12-02 14:40 pxa2xx-flash.c Anders Mørk-Pedersen
2011-12-04 14:29 ` pxa2xx-flash.c Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EDC7B590200008E00014334@mail.frogne.dk \
--to=amp@frogne.dk \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).