From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <50125FC3.4040603@de.bosch.com> Date: Fri, 27 Jul 2012 11:30:43 +0200 From: Dirk Behme MIME-Version: 1.0 To: Huang Shijie , Fabio Estevam , Richard Zhao Subject: Re: [PATCH v2 3/3] ARM: imx_v6_v7_defconfig: Select MXS_DMA References: <1343215100-24005-1-git-send-email-festevam@gmail.com> <1343215100-24005-3-git-send-email-festevam@gmail.com> In-Reply-To: Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Cc: "Artem.Bityutskiy@linux.intel.com" , "b32955@freescale.com" , "linux-mtd@lists.infradead.org" , "kernel@pengutronix.de" , "shawn.guo@linaro.org" , Fabio Estevam , "dwmw2@infradead.org" , "linux-arm-kernel@lists.infradead.org" List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On 26.07.2012 13:32, Huang Shijie wrote: > On Thu, Jul 26, 2012 at 7:08 AM, Fabio Estevam wrote: >> On Thu, Jul 26, 2012 at 7:56 AM, Huang Shijie wrote: >>> On Thu, Jul 26, 2012 at 6:53 AM, Fabio Estevam wrote: >>>> On Wed, Jul 25, 2012 at 11:24 PM, Huang Shijie wrote: >>>> >>>>> But you have added "depend on MXS_DMA". So If you do not select the >>>>> mxs-dma, you can not see the >>>>> gpmi-nand. >>>>> that's why i think this patch is not needed. >>>> So how CONFIG_MXS_DMA would be selected if not via defconfig? >>> Use the make menuconfig ARCH=arm: >>> >>> "device drivers"-->"DMA engine support" -->"mxs dma support" >> I prefer to have selected in the defconfig by default instead. >> >> It is not obvious for the end user that they need to manually select >> this option. >> >> mxs_defconfig also selects CONFIG_MXS_DMA. > In mx23/mx28, the mxs-dma has many users, so it's proper to make it default. > >> Can't we do the same here and let imx_v6_v7_defconfig be built again? > Shawn, do you have any opinion about this? First, I think Shawn is on holiday at the moment. Second, recent kernel mainline from today building imx_v6_v7_defconfig is broken due to this. So to make it build again, we have to enable CONFIG_MXS_DMA anyhow. As it seems that GPMI_NAND needs it to build, I would vote for the depends on MXS_DMA fix proposed by Richard http://www.spinics.net/lists/arm-kernel/msg186111.html Anyhow, any chance to get the kernel mainline fixed asap? Many thanks and best regards Dirk