From: Vikram Narayanan <vikram186@gmail.com>
To: Dimitar Penev <dpn@switchfin.org>
Cc: linux-mtd@lists.infradead.org, dedekind1@gmail.com
Subject: Re: ubiattach issue
Date: Fri, 21 Sep 2012 02:07:14 +0530 [thread overview]
Message-ID: <505B7E7A.6070200@gmail.com> (raw)
In-Reply-To: <016601cd9765$38f20a90$2901a8c0@dpn>
Hello Dimitar,
Cc-ing Artem
On 9/21/2012 12:52 AM, Dimitar Penev wrote:
> Hi Vikram,
>
> Thank you for your response.
>
> It is a check out from http://git.infradead.org/?p=mtd-utils.git
> Git signature 36d8de81049c9c908740b690c664b5bd3703ccd6
I tested with this checkout in my nandsim under x86. But couldn't
reproduce the issue. (But I was on 2.6.38.8 kernel).
Could you also post the corresponding kernel logs when you issued the
ubiattach command? That should give more hints.
~Vikram
>
> ----- Original Message ----- From: "Vikram Narayanan" <vikram186@gmail.com>
> To: "Dimitar Penev" <dpn@switchfin.org>
> Cc: <linux-mtd@lists.infradead.org>
> Sent: Thursday, September 20, 2012 9:25 PM
> Subject: Re: ubiattach issue
>
>
>> On 9/20/2012 2:14 PM, Dimitar Penev wrote:
>>> Hi Gents,
>>>
>>> I am facing an issue with ubiattach on Linux kernel 3.0.8
>>> On our target we have nand flash with mtd layer on top.
>>> The logs attached below.
>>>
>>> Can you please give me a pointer?
>>>
>>>
>>> /bin # ubinfo -a
>>> UBI version: 1
>>> Count of UBI devices: 0
>>> UBI control device major/minor: 10:62
>>>
>>> /bin # ubiformat /dev/mtd5 -y --vid-hdr-offset="2048"
>>> ubiformat: mtd5 (nand), size 511705088 bytes (488.0 MiB), 3904
>>> eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
>>> libscan: scanning eraseblock 3903 -- 100 % complete
>>> ubiformat: 3904 eraseblocks have valid erase counter, mean value is 3
>>> ubiformat: formatting eraseblock 3903 -- 100 % complete
>>>
>>> /bin # ubiattach /dev/ubi_ctrl --mtdn=5 --devn=0 --vid-hdr-offset="2048"
>>> ubiattach: error!: cannot attach mtd5
>>> error 25 (Inappropriate ioctl for device)
>>
>> Before any pointers, which version of mtd-utils are you using?
>> How to:
>> (http://linux-mtd.infradead.org/faq/general.html#L_compile_mtd)
>>
>> ~Vikram
>>
>> ______________________________________________________
>> Linux MTD discussion mailing list
>> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>>
>
next prev parent reply other threads:[~2012-09-20 20:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-20 8:44 ubiattach issue Dimitar Penev
2012-09-20 10:18 ` Dimitar Penev
2012-09-20 18:25 ` Vikram Narayanan
2012-09-20 19:22 ` Dimitar Penev
2012-09-20 19:40 ` Dimitar Penev
2012-09-20 20:37 ` Vikram Narayanan [this message]
2012-09-21 6:40 ` Dimitar Penev
2012-09-21 8:44 ` Dimitar Penev
2012-09-21 9:05 ` Dimitar Penev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=505B7E7A.6070200@gmail.com \
--to=vikram186@gmail.com \
--cc=dedekind1@gmail.com \
--cc=dpn@switchfin.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox