From: Huang Shijie <b32955@freescale.com>
To: Vikram Narayanan <vikram186@gmail.com>
Cc: linux-mtd@lists.infradead.org, dedekind1@gmail.com
Subject: Re: i.MX6S/GPMI-NAND issue on 3.5.4
Date: Mon, 8 Oct 2012 10:51:58 +0800 [thread overview]
Message-ID: <50723FCE.4000708@freescale.com> (raw)
In-Reply-To: <505CB1ED.8010909@gmail.com>
于 2012年09月22日 02:29, Vikram Narayanan 写道:
> Hello,
>
> I'm facing some issue with GPMI-NAND driver on i.MX6 solo.
Does the MX6Q solo support the NAND?
I have the solo board in my hand. But it can not support the NAND.
You make the board yourself?
If so, please check the pinmux for solo.
thanks
Huang Shijie
> I've a TOSHIBA 4KiB page NAND connected to the GPMI.
> (4KiB + 128 bytes OOB)
>
> I tested it using the following,
>
> 1) U-boot v2012.04
> 2) Freescale's U-boot for i.MX6
> 3) Freescale's Kernel 3.0.15
> Result: 0x98 0xAC 0x90 0x26 (Correct)
>
> 4) Linux v3.5.4 stable
> Result: 0x98 0xA8 0x90 0x20 (Incorrect)
>
> When I issue a READID command, 1, 2 & 3 gives me correct results,
> whereas the 3.5.4 version gives me some different result.
>
> Any help would be very much appreciated.
>
> Regards,
> Vikram
>
next prev parent reply other threads:[~2012-10-08 2:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-21 18:29 i.MX6S/GPMI-NAND issue on 3.5.4 Vikram Narayanan
2012-10-08 2:51 ` Huang Shijie [this message]
2012-10-08 16:44 ` Vikram Narayanan
2012-10-08 4:02 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50723FCE.4000708@freescale.com \
--to=b32955@freescale.com \
--cc=dedekind1@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=vikram186@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox