Re: [PATCH] nand: gpmi-nand: Fix clock registration

[Huang Shijie <b32955@freescale.com>]

于 2012年10月08日 11:15, Marek Vasut 写道:
> Dear Huang Shijie,
>
>> 于 2012年09月24日 02:31, Fabio Estevam 写道:
>>> From: Fabio Estevam <fabio.estevam@freescale.com>
>>>
>>> On a mx28 board the following error happens since commit 638064e56c
>>> (mtd: gpmi: change the code for clocks):
>>>
>>> gpmi-nand: probe of 8000c000.gpmi-nand failed with error -12
>>>
>>> Acquire the clock using "NULL" as it was done previously, so that the
>>> driver can register on mx23/mx28 as well.
>>>
>>> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
>>> ---
>>>
>>>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c |    2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>>> b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index c46be6c..1f23cb4 100644
>>> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>>> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
>>> @@ -492,7 +492,7 @@ static int __devinit gpmi_get_clks(struct
>>> gpmi_nand_data *this)
>>>
>>>  	int i;
>>>  	
>>>  	/* The main clock is stored in the first. */
>>>
>>> -	r->clock[0] = clk_get(this->dev, "gpmi_io");
>>> +	r->clock[0] = clk_get(this->dev, NULL);
>> Please do not change this line.
>>
>> The gpmi_io is for mx6q.
>> If you replace it with `NULL`. The mx6q can not find the proper clock.
> Suggestion is really welcome though, please :) This is a problem, GPMI NAND is 
> broken on anything != mx6q. Huang, can you please also test the changes you do 
> to GPMI NAND on mx28/mx23 so we can avoid this breakage in the future?
yes. I tested in the mx23/mx28. It's ok, do not worry.

BR
Huang Shijie
> Best regards,
> Marek Vasut
>