From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pb0-f49.google.com ([209.85.160.49]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TLGRN-0004ZQ-N3 for linux-mtd@lists.infradead.org; Mon, 08 Oct 2012 16:44:26 +0000 Received: by mail-pb0-f49.google.com with SMTP id xa7so4528467pbc.36 for ; Mon, 08 Oct 2012 09:44:23 -0700 (PDT) Message-ID: <507302D5.5050802@gmail.com> Date: Mon, 08 Oct 2012 22:14:05 +0530 From: Vikram Narayanan MIME-Version: 1.0 To: Huang Shijie Subject: Re: i.MX6S/GPMI-NAND issue on 3.5.4 References: <505CB1ED.8010909@gmail.com> <50723FCE.4000708@freescale.com> In-Reply-To: <50723FCE.4000708@freescale.com> Content-Type: text/plain; charset=GB2312 Content-Transfer-Encoding: 8bit Cc: linux-mtd@lists.infradead.org, dedekind1@gmail.com List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On 10/8/2012 8:21 AM, Huang Shijie wrote: > 于 2012年09月22日 02:29, Vikram Narayanan 写道: >> Hello, >> >> I'm facing some issue with GPMI-NAND driver on i.MX6 solo. > Does the MX6Q solo support the NAND? Yes. i.Mx6Solo supports NAND. > I have the solo board in my hand. But it can not support the NAND. > > You make the board yourself? > If so, please check the pinmux for solo. Yeah I figured out that pinctrl driver was the problem.Anyway thanks for the pointing it out. Regards, Vikram