From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <507421FF.2090309@ti.com> Date: Tue, 9 Oct 2012 18:39:19 +0530 From: Sekhar Nori MIME-Version: 1.0 To: Sekhar Nori Subject: Re: [PATCH 1/1] mtd:nand:clk: preparation for switch to common clock framework References: <1347899860-24358-1-git-send-email-m-karicheri2@ti.com> <1347899860-24358-2-git-send-email-m-karicheri2@ti.com> <507420A4.8090905@ti.com> In-Reply-To: <507420A4.8090905@ti.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Cc: davinci-linux-open-source@linux.davincidsp.com, mikedunn@newsguy.com, artem.bityutskiy@linux.intel.com, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, hs@denx.de, dwmw2@infradead.org, linux-arm-kernel@lists.infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On 10/9/2012 6:33 PM, Sekhar Nori wrote: > On 9/17/2012 10:07 PM, Murali Karicheri wrote: >> As a first step towards migrating davinci platforms to use common clock >> framework, replace all instances of clk_enable() with clk_prepare_enable() >> and clk_disable() with clk_disable_unprepare(). Until the platform is >> switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just >> adds a might_sleep() call and would work without any issues. >> >> This will make it easy later to switch to common clk based implementation >> of clk driver from DaVinci specific driver. >> >> Signed-off-by: Murali Karicheri >> Reviewed-by: Mike Turquette > > Tested this using NAND flash on DA850 EVM. > > Acked-by: Sekhar Nori > > Any chance this can make into the v3.7 kernel? Just noticed another thread where Artem replied saying this patch is pushed. Sorry about the noise. Thanks, Sekhar