[PATCH] mtd nand : print flash size during detection

[PATCH] mtd nand : print flash size during detection

[Matthieu CASTET]

This help to detect bad flash identification in case the size is not present
on the name (ONFI).

Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
---
 drivers/mtd/nand/nand_base.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index c90ef66..8916bc6 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3292,10 +3292,10 @@ ident_done:
 		chip->cmdfunc = nand_command_lp;
 
 	pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
-		" page size: %d, OOB size: %d\n",
+		" %dMiB page size: %d, OOB size: %d\n",
 		*maf_id, *dev_id, nand_manuf_ids[maf_idx].name,
 		chip->onfi_version ? chip->onfi_params.model : type->name,
-		mtd->writesize, mtd->oobsize);
+		(int)(chip->chipsize >> 20), mtd->writesize, mtd->oobsize);
 
 	return type;
 }
-- 
1.7.10.4

Re: [PATCH] mtd nand : print flash size during detection

[Huang Shijie]

于 2012年11月06日 19:03, Matthieu CASTET 写道:
> This help to detect bad flash identification in case the size is not present
> on the name (ONFI).
>
I think you should give us a example of "bad flash identification".

I also want to add this patch to print out the flash size during 
detection, but not for the "bad flash identification" reason,

Best Regards
Huang Shijie

Re: [PATCH] mtd nand : print flash size during detection

[Artem Bityutskiy]

[-- Attachment #1: Type: text/plain, Size: 907 bytes --]

On Tue, 2012-11-06 at 12:03 +0100, Matthieu CASTET wrote:
> This help to detect bad flash identification in case the size is not present
> on the name (ONFI).
> 
> Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
> ---
>  drivers/mtd/nand/nand_base.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index c90ef66..8916bc6 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -3292,10 +3292,10 @@ ident_done:
>  		chip->cmdfunc = nand_command_lp;
>  
>  	pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
> -		" page size: %d, OOB size: %d\n",
> +		" %dMiB page size: %d, OOB size: %d\n",

Is this readable? No comma after the size. I guess it is better to add
"size %dMiB," instead?

-- 
Best Regards,
Artem Bityutskiy

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH] mtd nand : print flash size during detection

[Huang Shijie]

于 2012年11月16日 16:24, Artem Bityutskiy 写道:
> On Tue, 2012-11-06 at 12:03 +0100, Matthieu CASTET wrote:
>> This help to detect bad flash identification in case the size is not present
>> on the name (ONFI).
>>
>> Signed-off-by: Matthieu CASTET<matthieu.castet@parrot.com>
>> ---
>>   drivers/mtd/nand/nand_base.c |    4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
>> index c90ef66..8916bc6 100644
>> --- a/drivers/mtd/nand/nand_base.c
>> +++ b/drivers/mtd/nand/nand_base.c
>> @@ -3292,10 +3292,10 @@ ident_done:
>>   		chip->cmdfunc = nand_command_lp;
>>
>>   	pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
>> -		" page size: %d, OOB size: %d\n",
>> +		" %dMiB page size: %d, OOB size: %d\n",
> Is this readable? No comma after the size. I guess it is better to add
> "size %dMiB," instead?
>
In multi chip enables nand chips, such as some Micron nand chips, you 
will find half size is printed
after this patch is applied. Why? because we only scan one #CE, but this 
nand chip has two #CE, the #CE0 and #CE1.


a little confused.

Best Regards
Huang Shijie

Re: [PATCH] mtd nand : print flash size during detection

[Matthieu CASTET]

Huang Shijie a écrit :
> 于 2012年11月06日 19:03, Matthieu CASTET 写道:
>> This help to detect bad flash identification in case the size is not present
>> on the name (ONFI).
>>
> I think you should give us a example of "bad flash identification".
> 
> I also want to add this patch to print out the flash size during 
> detection, but not for the "bad flash identification" reason,

When Onfi support in mtd wasn't good, it could have help us to catch case of bad
support of multi-lun nand (only a size of 1 lun where used).


Matthieu

Re: [PATCH] mtd nand : print flash size during detection

[Matthieu CASTET]

Artem Bityutskiy a écrit :
> On Tue, 2012-11-06 at 12:03 +0100, Matthieu CASTET wrote:
>> This help to detect bad flash identification in case the size is not present
>> on the name (ONFI).
>>
>> Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
>> ---
>>  drivers/mtd/nand/nand_base.c |    4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
>> index c90ef66..8916bc6 100644
>> --- a/drivers/mtd/nand/nand_base.c
>> +++ b/drivers/mtd/nand/nand_base.c
>> @@ -3292,10 +3292,10 @@ ident_done:
>>  		chip->cmdfunc = nand_command_lp;
>>  
>>  	pr_info("NAND device: Manufacturer ID: 0x%02x, Chip ID: 0x%02x (%s %s),"
>> -		" page size: %d, OOB size: %d\n",
>> +		" %dMiB page size: %d, OOB size: %d\n",
> 
> Is this readable? No comma after the size. I guess it is better to add
> "size %dMiB," instead?
> 
ok

Re: [PATCH] mtd nand : print flash size during detection

[Matthieu CASTET]

Huang Shijie a écrit :
>>
> In multi chip enables nand chips, such as some Micron nand chips, you 
> will find half size is printed
> after this patch is applied. Why? because we only scan one #CE, but this 
> nand chip has two #CE, the #CE0 and #CE1.
> 
> 
> a little confused.
nand_get_flash_type probe only one chip.

For multi chip, you should see the log :
"x NAND chips detected".

The resulting mtd size will be x * the chip size.