From: Josh Wu <josh.wu@atmel.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: mikedunn@newsguy.com, plagnioj@jcrosoft.com,
linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, dedekind1@gmail.com
Subject: Re: [PATCH] MTD: at91: atmel_nand: return bit flips for the PMECC read_page()
Date: Thu, 22 Nov 2012 11:39:58 +0800 [thread overview]
Message-ID: <50AD9E8E.7050402@atmel.com> (raw)
In-Reply-To: <50ACA764.3030002@atmel.com>
Hi, Nicolas
On 11/21/2012 6:05 PM, Nicolas Ferre wrote:
> On 11/21/2012 06:14 AM, Josh Wu :
>>
> Can we have more comment to figure out why it is needed please?
I will add following comment in the commit message in the v2 version.
Since the commit: 3f91e94f7f511de74c0d2abe08672ccdbdd1961c ("mtd: nand:
read_page() returns max_bitflips ()")
The ecc.read_page() method for nand drivers is changed to return the
maximum number of bitflips instead of just returning 0.
And the nand.h is also explain that. I would like to adapt to it.
Best Regards,
Josh Wu
>
> Best regards,
>
>> Signed-off-by: Josh Wu <josh.wu@atmel.com>
>> ---
>> drivers/mtd/nand/atmel_nand.c | 13 +++++++++----
>> 1 file changed, 9 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
>> index 9144557..860dd36 100644
>> --- a/drivers/mtd/nand/atmel_nand.c
>> +++ b/drivers/mtd/nand/atmel_nand.c
>> @@ -723,6 +723,7 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
>> struct atmel_nand_host *host = nand_chip->priv;
>> int i, err_nbr, eccbytes;
>> uint8_t *buf_pos;
>> + int total_err = 0;
>>
>> eccbytes = nand_chip->ecc.bytes;
>> for (i = 0; i < eccbytes; i++)
>> @@ -750,12 +751,13 @@ normal_check:
>> pmecc_correct_data(mtd, buf_pos, ecc, i,
>> host->pmecc_bytes_per_sector, err_nbr);
>> mtd->ecc_stats.corrected += err_nbr;
>> + total_err += err_nbr;
>> }
>> }
>> pmecc_stat >>= 1;
>> }
>>
>> - return 0;
>> + return total_err;
>> }
>>
>> static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
>> @@ -767,6 +769,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
>> uint32_t *eccpos = chip->ecc.layout->eccpos;
>> uint32_t stat;
>> unsigned long end_time;
>> + int bitflips = 0;
>>
>> pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
>> pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
>> @@ -789,11 +792,13 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
>> }
>>
>> stat = pmecc_readl_relaxed(host->ecc, ISR);
>> - if (stat != 0)
>> - if (pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]) != 0)
>> + if (stat != 0) {
>> + bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
>> + if (bitflips < 0)
>> return -EIO;
>> + }
>>
>> - return 0;
>> + return bitflips;
>> }
>>
>> static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
>>
>
next prev parent reply other threads:[~2012-11-22 3:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-21 5:14 [PATCH] MTD: at91: atmel_nand: return bit flips for the PMECC read_page() Josh Wu
2012-11-21 10:05 ` Nicolas Ferre
2012-11-22 3:39 ` Josh Wu [this message]
2012-11-27 18:06 ` Mike Dunn
2012-11-26 20:38 ` Mike Dunn
2012-11-27 2:31 ` Josh Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50AD9E8E.7050402@atmel.com \
--to=josh.wu@atmel.com \
--cc=dedekind1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mikedunn@newsguy.com \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox