From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pb0-f43.google.com ([209.85.160.43]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1Tkms0-0003Eu-Px for linux-mtd@lists.infradead.org; Tue, 18 Dec 2012 02:25:25 +0000 Received: by mail-pb0-f43.google.com with SMTP id um15so66156pbc.2 for ; Mon, 17 Dec 2012 18:25:22 -0800 (PST) Message-ID: <50CFD40B.3010302@gmail.com> Date: Tue, 18 Dec 2012 07:55:15 +0530 From: Vikram Narayanan MIME-Version: 1.0 To: Huang Shijie Subject: Re: UBI IO errors with GPMI NAND References: <50CBF18B.3050208@gmail.com> <50CFCBDC.6090102@freescale.com> In-Reply-To: <50CFCBDC.6090102@freescale.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Cc: linux-mtd@lists.infradead.org, Artem Bityutskiy List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello Huang, On 12/18/2012 7:20 AM, Huang Shijie wrote: > 于 2012年12月15日 11:42, Vikram Narayanan 写道: >> I'm using a i.Mx6 Solo based custom board with the below NAND chip. > The gpmi-nand can not run in the imx6 solo board. Please check the > PINMUX for the gpmi. It is not ready. I adapted the PINMUX for Solo variant. Is there any other thing other than PINUMX which restricts the usage on i.Mx6 solo? Regards, Vikram