public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Huang Shijie <b32955@freescale.com>
To: Zach Sadecki <zsadecki@itwatchdogs.com>
Cc: linux-mtd@lists.infradead.org, dedekind1@gmail.com
Subject: Re: [PATCH] mtd: gpmi: Always report ECC stats and return max_bitflips
Date: Thu, 10 Jan 2013 11:01:43 +0800	[thread overview]
Message-ID: <50EE2F17.7050303@freescale.com> (raw)
In-Reply-To: <50CA90BB.5030801@itwatchdogs.com>

于 2012年12月14日 10:36, Zach Sadecki 写道:
> Always report corrected and failed ECC stats back up to the MTD layer. 
> Also
> return max_bitflips from read_page() as is expected from NAND drivers 
> now.
>
> Signed-off-by: Zach Sadecki <zsadecki@itwatchdogs.com>
> Acked-by: Huang Shijie <b32955@freescale.com>
> ---
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 27 ++++++++-------------------
> 1 file changed, 8 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c 
> b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 5cd141f..1535bd5 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -921,8 +921,7 @@ static int gpmi_ecc_read_page(struct mtd_info 
> *mtd, struct nand_chip *chip,
> dma_addr_t auxiliary_phys;
> unsigned int i;
> unsigned char *status;
> - unsigned int failed;
> - unsigned int corrected;
> + unsigned int max_bitflips = 0;
> int ret;
>
> pr_debug("page number is : %d\n", page);
> @@ -946,35 +945,25 @@ static int gpmi_ecc_read_page(struct mtd_info 
> *mtd, struct nand_chip *chip,
> payload_virt, payload_phys);
> if (ret) {
> pr_err("Error in ECC-based read: %d\n", ret);
> - goto exit_nfc;
> + return ret;
> }
>
> /* handle the block mark swapping */
> block_mark_swapping(this, payload_virt, auxiliary_virt);
>
> /* Loop over status bytes, accumulating ECC status. */
> - failed = 0;
> - corrected = 0;
> - status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
> + status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
>
> for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
> if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
> continue;
>
> if (*status == STATUS_UNCORRECTABLE) {
> - failed++;
> + mtd->ecc_stats.failed++;
> continue;
> }
> - corrected += *status;
> - }
> -
> - /*
> - * Propagate ECC status to the owning MTD only when failed or
> - * corrected times nearly reaches our ECC correction threshold.
> - */
> - if (failed || corrected >= (nfc_geo->ecc_strength - 1)) {
> - mtd->ecc_stats.failed += failed;
> - mtd->ecc_stats.corrected += corrected;
> + mtd->ecc_stats.corrected += *status;
> + max_bitflips = max_t(unsigned int, max_bitflips, *status);
> }
>
> if (oob_required) {
> @@ -996,8 +985,8 @@ static int gpmi_ecc_read_page(struct mtd_info 
> *mtd, struct nand_chip *chip,
> this->payload_virt, this->payload_phys,
> nfc_geo->payload_size,
> payload_virt, payload_phys);
> -exit_nfc:
> - return ret;
> +
> + return max_bitflips;
> }
>
> static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip 
> *chip,
just a ping.

  reply	other threads:[~2013-01-10  3:02 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-03 19:48 [PATCH] mtd: gpmi: Always report ECC stats and return max_bitflips Zach Sadecki
2012-12-04  3:34 ` Huang Shijie
2012-12-04 14:40   ` Zach Sadecki
2012-12-05  3:04     ` Huang Shijie
2012-12-10 13:44 ` Artem Bityutskiy
2012-12-10 15:10   ` Zach Sadecki
2012-12-10 15:18   ` Zach Sadecki
2012-12-12 15:17     ` Artem Bityutskiy
2012-12-12 16:57       ` Zach Sadecki
2012-12-13 11:27     ` Artem Bityutskiy
2012-12-14  2:36       ` Zach Sadecki
2012-12-14  2:36       ` Zach Sadecki
2013-01-10  3:01         ` Huang Shijie [this message]
2013-01-15  9:30         ` Artem Bityutskiy
2012-12-14  2:39       ` Zach Sadecki
2013-01-10  3:28         ` Huang Shijie
2013-01-10 15:40           ` Zach Sadecki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50EE2F17.7050303@freescale.com \
    --to=b32955@freescale.com \
    --cc=dedekind1@gmail.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=zsadecki@itwatchdogs.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox