From: Josh Wu <josh.wu@atmel.com>
To: Josh Wu <josh.wu@atmel.com>
Cc: plagnioj@jcrosoft.com, linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, nicolas.ferre@atmel.com
Subject: Re: [PATCH 0/3] at91: PMECC: enable PMECC in dt for at91sam9x5ek, at91sam9n12ek
Date: Mon, 14 Jan 2013 17:01:52 +0800 [thread overview]
Message-ID: <50F3C980.7070507@atmel.com> (raw)
In-Reply-To: <1355912840-29501-1-git-send-email-josh.wu@atmel.com>
Ping? Any feedback for these patches?
On 12/19/2012 6:27 PM, Josh Wu wrote:
> Those patches will enable PMECC in dt parameters for at91sam9x5ek, at91sam9n12ek.
>
> Josh Wu (3):
> MTD: at91: atmel_nand: for PMECC, add code to choose the ecc bits and
> sector size according to the ONFI parameter ECC requirement.
> at91: 9x5: add DT parameters to enable PMECC
> at91: at91sam9n12: add DT parameters to enable PMECC
>
> arch/arm/boot/dts/at91sam9n12.dtsi | 1 +
> arch/arm/boot/dts/at91sam9n12ek.dts | 5 +-
> arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++
> arch/arm/boot/dts/at91sam9x5cm.dtsi | 5 +-
> drivers/mtd/nand/atmel_nand.c | 89 +++++++++++++++++++++++++++++++++++
> 5 files changed, 102 insertions(+), 2 deletions(-)
>
Best Regards,
Josh Wu
prev parent reply other threads:[~2013-01-14 9:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-19 10:27 [PATCH 0/3] at91: PMECC: enable PMECC in dt for at91sam9x5ek, at91sam9n12ek Josh Wu
2012-12-19 10:27 ` [PATCH 1/3] MTD: at91: atmel_nand: for PMECC, add code to choose the ecc bits and sector size according to the ONFI parameter ECC requirement Josh Wu
2013-01-15 12:26 ` Artem Bityutskiy
2013-01-16 1:50 ` Bo Shen
2013-01-16 8:28 ` Josh Wu
2013-01-17 11:54 ` Artem Bityutskiy
2012-12-19 10:27 ` [PATCH 2/3] at91: 9x5: add DT parameters to enable PMECC Josh Wu
2012-12-19 10:27 ` [PATCH 3/3] at91: at91sam9n12: " Josh Wu
2013-01-14 9:01 ` Josh Wu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50F3C980.7070507@atmel.com \
--to=josh.wu@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox