[PATCH 05/12] drivers/mtd/nand: don't use devm_pinctrl_get_select_default() in probe

[PATCH 05/12] drivers/mtd/nand: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/mtd/nand/atmel_nand.c |    9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 2d23d29..4653b64a 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -41,7 +41,6 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/platform_data/atmel.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <mach/cpu.h>
 
@@ -1470,7 +1469,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	struct resource *mem;
 	struct mtd_part_parser_data ppdata = {};
 	int res;
-	struct pinctrl *pinctrl;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
@@ -1515,13 +1513,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	nand_chip->IO_ADDR_W = host->io_base;
 	nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		dev_err(host->dev, "Failed to request pinctrl\n");
-		res = PTR_ERR(pinctrl);
-		goto err_ecc_ioremap;
-	}
-
 	if (gpio_is_valid(host->board.rdy_pin)) {
 		res = gpio_request(host->board.rdy_pin, "nand_rdy");
 		if (res < 0) {
-- 
1.7.10.4

Re: [PATCH 05/12] drivers/mtd/nand: don't use devm_pinctrl_get_select_default() in probe

[Artem Bityutskiy]

On Wed, 2013-07-10 at 16:57 +0100, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pushed to l2-mtd.git, thanks!

-- 
Best Regards,
Artem Bityutskiy

[PATCH 06/12] drivers/mtd/nand/gpmi-nand: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c |    9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 25ecfa1..fd49464 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -26,7 +26,6 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/mtd/partitions.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_mtd.h>
@@ -516,7 +515,6 @@ err_clock:
 
 static int acquire_resources(struct gpmi_nand_data *this)
 {
-	struct pinctrl *pinctrl;
 	int ret;
 
 	ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME);
@@ -535,19 +533,12 @@ static int acquire_resources(struct gpmi_nand_data *this)
 	if (ret)
 		goto exit_dma_channels;
 
-	pinctrl = devm_pinctrl_get_select_default(&this->pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		ret = PTR_ERR(pinctrl);
-		goto exit_pin;
-	}
-
 	ret = gpmi_get_clks(this);
 	if (ret)
 		goto exit_clock;
 	return 0;
 
 exit_clock:
-exit_pin:
 	release_dma_channels(this);
 exit_dma_channels:
 	release_bch_irq(this);
-- 
1.7.10.4

Re: [PATCH 06/12] drivers/mtd/nand/gpmi-nand: don't use devm_pinctrl_get_select_default() in probe

[Huang Shijie]

于 2013年07月10日 23:57, Wolfram Sang 写道:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> --- 
i remember Fabio had already sent a similar patch about this issue.

thanks
Huang Shijie

Re: [PATCH 06/12] drivers/mtd/nand/gpmi-nand: don't use devm_pinctrl_get_select_default() in probe

[Huang Shijie]

于 2013年07月11日 10:14, Huang Shijie 写道:
> 于 2013年07月10日 23:57, Wolfram Sang 写道:
>> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
>> we can rely on device core for setting the default pins. Compile tested only.
>>
>> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
>> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
>> --- 
> i remember Fabio had already sent a similar patch about this issue.
>
sorry. Fabio just fix it in the gpmi driver, maybe he did not fix the
atmel-nand.

thanks
Huang Shijie

Re: [PATCH 06/12] drivers/mtd/nand/gpmi-nand: don't use devm_pinctrl_get_select_default() in probe

[Linus Walleij]

On Wed, Jul 10, 2013 at 5:57 PM, Wolfram Sang <wsa@the-dreams.de> wrote:

> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Artem  if you're OK with this please carry it in the MTD tree.

Yours,
Linus Walleij

Re: [PATCH 06/12] drivers/mtd/nand/gpmi-nand: don't use devm_pinctrl_get_select_default() in probe

[Artem Bityutskiy]

On Wed, 2013-07-10 at 16:57 +0100, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pushed to l2-mtd.git, thanks!

-- 
Best Regards,
Artem Bityutskiy